Product description: Servo - micro - 360 degrees - crocodile - Kitronik 25111
Micro type servo equipped with crocodile connectors. Thanks to the crocodile connectors, you can use the servo in projects that include other connection elements. The 360° rotary servo is equipped with lightweight plastic gears. It is powered by 4.8V to 6V and has a maximum torque of 1.5kg*cm. If the servo is used in micro:bit projects, a separate power supply is required. The servo can be programmed using MakeCode or Python, which are ideal for both novices and micro:bit professionals. A set of four orbs is also included.
- The servo requires a separate power supply from the micro:bit controller. Attempting to power the servo directly from the micro:bit may cause permanent damage to the micro:bit.
Servo - micro - 360 degree - crocodile - Kitronik 25111.
Servo Leads
The servo has a 3-pin cable with crocodile connectors. It is powered by 4.8 to 6 volts.
| Cable color | Connector colour | Description |
|---|---|---|
| Brown | Black | GND |
| Red | Red | Power supply |
| Orange | Yellow | Signal |
Components included.
Kitronik servo specifications
- Supply voltage: 4.8 V to 6 V
- Operating parameters for 4.8 V:
- idle current consumption: 5 mA
- no-load current consumption: 110 mA
- Current consumption when the shaft is stopped: 700 mA
- Speed: 80 rpm
- torque: 1.3 kg*cm
- Operating parameters for 6 V:
- Idle current consumption: 6 mA
- no-load current consumption: 130 mA
- Current consumption when shaft stopped: 800 mA
- Speed: 100 rpm
- torque: 1.5 kg*cm
- Housing: ABS
- Range: 360°
- Dimensions: 22.5 x 12.1 x 30.7 mm
- Cable length: 250 mm
- Length of crocodile connector: 34 mm
- Weight: 9 g
Useful links |
