- New
- New
Pakiet filamentów Devil Design - czarno-biały PLA Duo - 2szt.
Index: DEV-27746
- New
- Reduced price
- Pack
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 189
Loading...
L3GD20H 3-axis, digital I2C SPI gyroscope - Pololu 2129
Sensor to measure the angular velocity in three axes. It works in the range of up to ±240 °/s, ±500 °/s or ±2000 °/sec. It communicates via the I2C or SPI bus, it has the...
Index: PLL-02608
Index: PLL-02608
A4990 2-channel motor driver 32V/0,65 A - Shield for Arduino - Pololu 2512
Module with two-channel A4990 circuit working with voltages from 6 V to 32 V and current up to 0.65 A per channel (max. 0.9 A). The chip can be connected directly to the...
Index: PLL-02675
Index: PLL-02675
DRV8835 - two-channel 11V / 1,2A engine controller - overlay for Raspberry Pi - Pololu 2753
Module with two-channel circuit DRV8835 operating with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). It can be connected directly to the GPIO...
Index: PLL-02678
Index: PLL-02678
Step-Down Voltage Regulator D24V10F9 - 9V 1A - Pololu 2833
A step-down pulse inverter module with an efficiency of 80 % - 93 %. Converts the input voltage from 9.1 V to 36 V to an output value of 9 V. The maximum continuous current is...
Index: PLL-03021
Index: PLL-03021
Step-Down Voltage Regulator D24V5F15 - 15V 0,5A - Pololu 2847
A step-down pulse inverter module with an efficiency of 80 % - 93 %. Converts the input voltage from 15.1 V to 36 V to an output value of 15.0 V. The maximum continuous current...
Index: PLL-03114
Index: PLL-03114
Step-Down Voltage Regulator D24V25F7 - 7,5V 2,5A - Pololu 2853
Step-down converter with 7.5 V output voltage. The maximum current is 2.5 A. The supply voltage is in the wide range from 8.3 V to 38 V. The module dimensions are 18 x 18 mm.
Index: PLL-03157
Index: PLL-03157
A set of two high-current XT60 type connectors. Connectors are used, i.a. for connections with li-pol packs.
Index: KAB-03300
Index: KAB-03300
- Discontinued product
Limit switch microswitch SNAP ACTION - WLK-5MINI
Limit switch with lever with the length of 17 mm. Maximum operating parameters: voltage of 250 V and current of 5 A.
Index: PAS-03431
Index: PAS-03431
Speaker YD36 0.5W 8 Ohms - 40x5mm
Speaker power 0.5 W, resistance 8 Ohm, size 40 x 5 mm.
Index: EAK-03466
Index: EAK-03466
AMIS-30543 - stepper motor driver 30V/3A SPI - Pololu 2970
Stepper motor driver, power voltage range from 6 V to 35 V, with maximum current consumption of 3A through the coil. The maximum resolution is 1/128 step. The module allows a...
Index: PLL-04085
Index: PLL-04085
Grove - StarterKit v3 - IoT starter package for Arduino
Starter set introducing the world of IoT (Internet of Things) for Arduino boards. The set includes i.a.: sensors of light, touch, temperature, servo, display and many others....
Index: SEE-04445
Index: SEE-04445
Slide switch MSS-2245 2-position - straight
Slide switch, straight printable with dimensions of 9 x 3.5 x 3.5 mm. 2.54 mm lead spacing.
Index: UCC-04839
Index: UCC-04839
Index: KAB-04966
Step-Down Voltage Regulator D24V22F3 - 3,3V 2,6A - Pololu 2857
Step-down converter with 3.3 V output voltage. The maximum current is 2.6 A. The supply voltage is in the wide range from 4 V to 36 V. The module dimensions are 18 x 18 mm.
Index: PLL-04977
Index: PLL-04977
Step-Down Voltage Regulator D24V22F9 - 9V 2,3A - Pololu 2861
Step-down converter with 9 V output voltage. The maximum current is 2.3 A. The supply voltage is in the wide range from 9.6 V to 36 V. The module dimensions are 18 x 18 mm.
Index: PLL-04981
Index: PLL-04981
Large switch Slide MOSFET HP 4,5-40V/16A - with protection before reverse current - Pololu 2815
The executive module with a MOSFET transistor with a pair of channels P to control devices with higher current consumption than allowed by the control system, for example, a...
Index: PLL-05120
Index: PLL-05120
LIS3MDL 3-axis digital magnetometer I2C/SPI - Pololu 2737
Sensor to measure magnetic field in three axes in the range from ±4 gauss to ±16 gauss. The supply voltage is from 2.5 V to 5.5 V, sensor is characterized by small size, low...
Index: PLL-05330
Index: PLL-05330
A-Star 32U4 Robot Controller SV 36V/1.7A - extension to Raspberry Pi - Pololu 3119
Programmable system equipped with the famous from Arduino Leonardo, microcontroller Atmega32u4 with installed bootloader. It has dual driver of motors 36 V / 1,7 A and...
Index: PLL-05532
Index: PLL-05532
G2 High-Power 24v21 - single-channel motor controller 40V/21A - Pololu 2995
Single-channel high-performance DC motor controller. Continuous current per channel is 21 A (momentary up to 100 A), motor supply voltage from 6.5 V to 40 V, logical part...
Index: PLL-05722
Index: PLL-05722
G2 High-Power 18v25 - single-channel motor controller 30V/25A - Pololu 2994
Single-channel high-performance DC motor controller. Continuous current per channel is 25 A (momentary up to 100 A), motor supply voltage from 6.5 V to 30 V, logical part...
Index: PLL-05727
Index: PLL-05727
Rotary switch 8-position 1 circuit - 37mm
Rotary switch, eight-state for the case, equipped with 9 contacts. The total height is 37 mm.
Index: UCC-06150
Index: UCC-06150
Switch On-Off IRS-201-1A 250VAC/16A - red
On-Off type switch. The contact rating is 250 V AC / 16 A.
Index: KAB-06687
Index: KAB-06687
Desk lamp with 5D magnifying glass and LED backlight - Rebel
Lamp with magnifying glass for mounting on table top. The magnifying glass has a diameter of 120 mm and magnification is 5 dioptres.
Index: NSZ-06717
Index: NSZ-06717
Card reader - USB 2.0 + OTG - GoodRam
The memory card reader equipped with two interfaces: USB A plug to the computer, and microUSB OTG plug for tablets and smartphones with microUSB slot.
Index: KAP-06949
Index: KAP-06949