- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
USB-C Host Shield - hat for Arduino - MAX3421E - SparkFun DEV-21247
Index: SPF-22824
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
Velleman VMP502 prototype KIT for Raspberry Pi 4B/3B+/3B/2B/Zero
Index: VEL-10723
- Reduced price
- Promotion
Motor drivers and servos - Strona 4
Loading...
M1U256 - single-channel motor controller 48V/2,2A with connectors - UART interface - Pololu 5062
A driver based on the M1U256 system that allows you to control one DC motor. It uses the UART TTL interface for communication. The module can work with motors supplied with...
Index: PLL-22772
Index: PLL-22772
- On sale!
- Promotion
M3H550 - triple motor controller DC 22V/1,7A - for Raspberry Pi - Pololu 5072
A shield for Raspberry Pi that allows you to control three motors powered by voltage from 1.8 V to 22 V. It uses the I2C interface to communicate with the minicomputer....
Index: PLL-23646
Index: PLL-23646
- Reduced price
- Promotion
Motor Driver Carrier Board - 2x3A DC motor driver - carrier board for UNIHIKER - DFRobot DFR1136
A carrier board that allows you to control two DC motors with a maximum current of 3 A each, designed for the UNIHAKER minicomputer. It uses a connector with an inclined...
Index: DFR-25397
Index: DFR-25397
PWM motor driver DC 6-24V/3A/72W - with a speed control knob
Module with built-in rotary potentiometer for DC motor speed control by filling the PWM signal. It operates with motors from 6 V to 24 V up to 72 W (current consumption up to 3...
Index: PLL-06667
Index: PLL-06667
Haptic Motor Driver - DRV2605L - SparkFun ROB-14538
SparkFun module with DRV2605L haptic motor controller. It can handle ERM and LRA motors. Operates from 2 V to 5.2 V. Communicates over I2C bus.
Index: SPF-08219
Index: SPF-08219
Cytron SmartDriveDuo MDDS10 - two-channel 35V / 10A motor controller
Two-channel intelligent DC motor controller . Continuous current per channel 10 A (momentary 30 A). Supply voltage from 7 V to 35 V. It has interfaces such as UART, PWM,...
Index: CTN-12406
Index: CTN-12406
- Reduced price
- Promotion
Grove - PCA9685 - 16-channel server driver, 12-bit PWM I2C
A 16-channel PWM generator useful when there is no microcontroller output. It allows, among others: controlling servomechanisms, adjusting motor speed or changing LED...
Index: SEE-13511
Index: SEE-13511
Tic T249 - USB stepper motor driver 47V/4,5A - Pololu 3139
Stepper motor driver based on TB67S249FTG chip. Powered by a voltage range of 10 - 47 V, with a maximum current consumption of 4,5 A per coil. Maximum resolution: 1/32 of a...
Index: PLL-13821
Index: PLL-13821
DC Motor Driver HAT V1.0 - 2-channels motor driver 12V/1,2A - HAT for Raspberry Pi - DFRobot DFR0592
Two-channel DC motor controller TB6612FNG operating with voltage from 7 V to 12 V and continuous current 1.2 A per channel and momentary 2 A. The module in the form of an...
Index: DFR-15298
Index: DFR-15298
M2U256 - two-channel motor controller 48V/1,8A - UART interface - Pololu 5067
A driver based on the M2U256 system that allows you to control two DC motors. It uses the UART TTL interface for communication. The M2U256 can work with motors supplied with...
Index: PLL-22593
Index: PLL-22593
- On sale!
- Promotion
SparkFun Ardumoto - Motor Driver Shield - L298 - hat for Arduino - SparkFun DEV-14129
SparkFun Ardumoto is a shield designed for use with Arduino that allows you to control up to two DC motors . It is equipped with the popular L298 H-bridge, thanks to...
Index: SPF-23852
Index: SPF-23852
- Reduced price
- Promotion
Linear Actuator Driver FDI 24 V + remote
Versatile controller with the wired remote control, designed for the FDI actuators. It also allows you to control any actuator with a voltage of 24 V DC and a current not...
Index: MOD-06481
Index: MOD-06481
Driver for sliding gates KSE380/KSE180
Control unit for sliding gates KSE180 / KSE380 with radio receiver with frequency of 433.92 MHz.
Index: MOD-06508
Index: MOD-06508
DFRobot HR8833 - two-channel driver for DC 10V/1,5A motors
A miniature, two-channel DC motor controller. The device operates on the basis of PWM signal. The motor supply voltage is from 3.3 V to 10 V, maximum current is 1.5 A.
Index: DFR-06934
Index: DFR-06934
DFRobot - Dual channel DC motor driver - 27V/7A
A two-channel DC motor controller. The device operates on the basis of PWM signal. Supply voltage for motors ranges from 6.5 V to 27 V, the maximum current is 7 A.
Index: DFR-07421
Index: DFR-07421
TB6612FNG - two-channel driver for 15V/1.2A motors with connectors - SparkFun ROB-14450
SparkFun module with two channel DC motor driver. It is powered from 2.7 V to 15 V . Continuous current per channel is 1.2 A. It has soldered goldpin connectors.
Index: SPF-10666
Index: SPF-10666
Grove - L298N - two-channel motor controller 15V / 1A
Grove series module equipped with a two-channel H-bridge L298N , controlled by ATmege 8L. The circuit allows to regulate the direction of rotation of motors with maximum...
Index: SEE-11320
Index: SEE-11320
- Reduced price
- Promotion
TB67H420FTG Dual/Single Motor Driver Carrier - Pololu 2997
Single channel DC motor controller. Continuous current per channel 2.6 A (momentary up to 5 A). Supply voltage from 4.5 V to 28 V .
Index: PLL-12059
Index: PLL-12059
DFRobot L298N - two-channel motor controller - 12V / 2A
Two-channel DC motor controller based on L298N system. Supply voltage is up to 12 V. Maximum current per channel is 2 A. The system has a built-in voltage regulator 5 V, to...
Index: DFR-13754
Index: DFR-13754
Grove - L298P - two-channel motor driver 12V/2A - Seeedstudio 105020093
A module with an L298P motor controller that supports two DC motors or one stepper motor. The voltage supported by the controller is between 6 V and 12 V and the continuous...
Index: SEE-16906
Index: SEE-16906
Servo driver 16-channel, 16-bit PWM do Raspberry Pi Pico - Waveshare 19767
Expansion module for Raspberry Pi Pico to control 16 servos with 16-bit resolution. It uses PWM interface for communication. The module is also equipped with an output...
Index: WSR-19721
Index: WSR-19721
Three -channel motor driver for Motoron M3S256 from Pololu. The input voltage is in the range from 4.5 V to 48 V , the continuous current consumption is up to 2 A , and...
Index: PLL-21357
Index: PLL-21357
HRB8825 2-channel stepper motor driver 28V/2,5A - HAT For Raspberry Pi - Waveshare 22311
Two-channel stepper motor driver from Waveshare, in the form of a HAT shield for the Raspberry Pi. The controller is based on two HR8825 systems, it works with a voltage from...
Index: WSR-21705
Index: WSR-21705
Remote controller for electric actuator - Elektrobim RC-2K Pro
RC-2K Pro is a universal controller for electric actuators by Elektrobim . It is an easy-to-use device designed to remotely switch the direction of the piston rod. It has a...
Index: ELB-22916
Index: ELB-22916
See also
- Computer accessories
- Automobile accessories
- Cooling
- Diodes
- Sound and acoustics
- Mounting components
- Passive elements
- Wearables (e-textiles, smart clothes)
- Cameras and recorders
- Memory cards & disks
- Communication
- Converters
- Electronics courses
- Microcontrollers
- Animal repellers
- LED lighting
- Programmers
- Relays
- Voltage regulators
- Artificial intelligence
- Integrated circuits
- Displays and screens
- Tablets and smartphones
- Consoles
