Description
Digital distance sensor which serves to detect obstacles. The transmitter generates the modulated wave with a frequency of 180 kHz, the receiver captures the reflected light. The module operates with voltage from 2.5 V to 5 V. It has a digital output, making it compatible with most commissioning modules, includingRaspberry PiandArduino. The maximum range of the sensor is 150 cm.
Module contains the connecting wires with the female tips
|
The product is compatible with Arduino The manufacturer has prepared a user guide along witha sample program for Arduino and STM32. |
Connection
The device has three pins with soldered goldpin connectors - pitch of 2.54 mm.
| Pin | Description |
|---|---|
| VCC | Supply voltage: from 2.5 V to 5 V. |
| GND | The ground of the system. |
| DOUT | The digital output signal. The high status indicates the detection of an object within a given range. |
Specification
- Supply voltage: from 2.5 V to 5 V
- 1 x digital output DOUT
- Measurement distance:
- effective: 0.8 m
- maximum: 150 cm
- The wavelength of the emitted light: 650 nm
- The wavelength of the received light: from 650 to 950 nm
- Based on the system PT1301
- Two status LEDs that signal the power supply and the detection of precipitate
- Dimensions: 53 x 18 mm
|
Attention! When operating the sensor, you must be very careful not to direct the laser beam towards eyes. |
Useful links |
