- Reduced price
- Sale
- Reduced price
- Sale
Grove modules - Strona 7
Loading...
Grove - Collision Sensor - collision and vibration sensor
Collision sensor from Grove. It detect collision and vibration. It has an additional external circuit, to reduce the effect of ambient noise. The module is supplied with the...
Index: SEE-11300
Index: SEE-11300
- Reduced price
- SPECIAL OFFERS
Grove - L298N - two-channel motor controller 15V / 1A
Grove series module equipped with a two-channel H-bridge L298N , controlled by ATmege 8L. The circuit allows to regulate the direction of rotation of motors with maximum...
Index: SEE-11320
Index: SEE-11320
Grove - HP206C Pressure sensor I2C
High quality Grove pressure sensor, equipped with HP206C. It has a wide measuring range from 300 hPa to 1200 hPa. It is fully compatible with Arduino, it is connected to it via...
Index: SEE-14985
Index: SEE-14985
- Reduced price
- SPECIAL OFFERS
Grove - LED RGB module - 15 diodes WS2813 - Seeedstudio 104020172
Module with 15 WS2813 RGB LEDs arranged in one row. There is a Grove connector on the board for easy connection of the module to the base plate. Each LED is individually...
Index: SEE-15556
Index: SEE-15556
Grove - 3 Axis Digital Accelerometer 16g Ultra - Low Power (BMA400)
Grove module 3-axis ±16 g low power digital accelerometer. It is a 12-bit digital three-axis sensor that detects acceleration and movement. Based on a BMA400 chip. Powered by...
Index: SEE-14739
Index: SEE-14739
- Reduced price
- SPECIAL OFFERS
Joystick V1.1 MEGA8A - expansion Unit for M5Stack development modules
Joystick V1.1 MEGA8A in the form of a Unit extension for use with M5Stack development modules. The controller has the form of an analog knob similar to those used, among...
Index: MSS-21398
Index: MSS-21398
Grove - RGB LED Ring WS2813 x 24 LEDs - 70mm - Seeedstudio 104020168
The module in the form of a ring with a diameter of 70 mm equipped with 24 RGB LEDs with the WS2813 controller. Each of the diodes can be individually addressed. The ring...
Index: SEE-15552
Index: SEE-15552
Grove - module with LED RGB WS2813 diode - Seeedstudio 104020169
The module is equipped with RGB LED with WS2813 chip. It works with a voltage of 3.3 V and 5 V . The use of Grove connector makes it much easier to connect the module to...
Index: SEE-15553
Index: SEE-15553
Grove - Lightning Sensor - AS3935 - Seeedstudio 101021072
The Grove AS3935 sensor is an advanced, easy-to-use sensor that can detect both cloud-to-ground and intra-cloud lightning , up to a 40 km radius. It communicates via the...
Index: SEE-23887
Index: SEE-23887
SenseCAP S2110 Sensor Builder - Grove sensors to RS485 converter - Seeedstudio 114992986
SenseCAP S2110 Sensor Builder is an open source tool for creating RS485 sensors using Grove sensors. It also allows you to build a custom industrial-grade LoRaWAN sensor...
Index: SEE-22927
Index: SEE-22927
Grove - Doppler Radar - BGT24LTR11 - 24GHz transceiver - 10m - Seeedstudio 109020021
Doppler radar based on BGT24LTR11 chip and XMC1302 controller with ARM Cortex-M0 processor. It allows for precise distance measurements and motion detection using radar...
Index: SEE-17023
Index: SEE-17023
Grove - LED String Light - LED driver
Grove series module that allows you to control the LED strip included in the kit . The supply voltage is from 3.3 V to 5 V. Since the LEDs work with 12 V, the module is...
Index: SEE-11329
Index: SEE-11329
- Reduced price
- SPECIAL OFFERS
FeatherWing - 6 port Grove + STEMMA QT expansion module for Feather boards - Adafruit 5862
FeatherWing from Adafruit is an expansion module for Feather boards , allowing you to connect up to 6 devices with a Grove connector . Equipped with 3 analog / digital...
Index: ADA-25282
Index: ADA-25282
Grove - set of 5 female-female 4-pin 2mm Y-cables - 20cm - M5Stack A150
The Grove Y-cable kit of 5 allows you to connect two Grove modules to one M5Stack port simultaneously . The Y-splitter increases the versatility and expandability of your...
Index: MSS-26089
Index: MSS-26089
Arduino MKR Connector Carrier ASX00007 - shield for Arduino MKR
Module for Arduino from the MKR that extends the capabilities of I/O pins. It is designed for modules and sensors from the Grove series. It has 4-pin connectors, works with...
Index: ARD-12947
Index: ARD-12947
Grove - mini PIR motion sensor
The motion sensor, type PIR with the interface compatible with the Grove series. The object detection is indicated digitally - through the high status on SIG pin. The range of...
Index: SEE-13336
Index: SEE-13336
Grove - a speaker with a digital interface
Speaker module Grove is a device controlled by the PWM signal. It c an work as a simple buzzer or audio player. The volume is adjustable with the built in potentiometer. The...
Index: SEE-11352
Index: SEE-11352
- Discontinued product
Grove - IR receiver 38kHz 940nm
IR receiver from Grove , operating at a frequency of 38 kHz with a supply voltage from 3.3 V to 5.0 V. Maximum sensitivity is observed for the wave length of 940 nm.
Index: SEE-04419
Index: SEE-04419
Grove - 10kΩ rotary potentiometer linear lower connector
Potentiometer 10 kOhm with linear rotary. It has a 300° range of rotation. It has a 4-pin Grove connector on the other side of the handle. The kit includes a cable adapted...
Index: SEE-04430
Index: SEE-04430
Grove - Base Hat for Raspberry Pi - shield for Raspberry Pi 4B/3B+/3B
Overlay for Raspberry Pi 4B / 3B+ / 3B based STM32 microcontroller with 12-bit ADC, with Grove connectors, allows the connection of sensors and modules from the Grove...
Index: SEE-15458
Index: SEE-15458
Grove - Base Shield for Arduino Nano
Shield for Arduino Nano is a board fully compatible with Seeeduino Nano. It has 8 connectors, so it is possible to connect many devices, sensors, Grove displays using 4-pin...
Index: SEE-14994
Index: SEE-14994
Capacitive touch sensor based on the module TTP223-b is supplied with the voltage from 2 V to 5.5 V, the output is a digital signal.
Index: SEE-04431
Index: SEE-04431
Grove - push button with backlight - blue
Module from the Grove is equipped with a button with a blue LED. Powered with the v oltage from 3.3 V to 5 V. It has the Grove connector that allows for the direct...
Index: SEE-13660
Index: SEE-13660
Grove - a set of 5 female-female 4-pin - 2mm/20cm I2C splitters
A set of five 4-pin wires Grove. With them you can connect two I2C Grove modules to one connector of the I2C bus, for example on the Base Shield v2 board. Cables are compatible...
Index: SEE-04396
Index: SEE-04396
See also
- RPM sensors
- Twilight sensors
- Tilt sensors
- Accelerometers
- Inductive sensors
- Hall effect sensors
- Oxygen sensors
- Optical sensors
- Resistance sensors
- Door sensors
- Piezoelectric sensors
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Gas sensors
- Limit switches
- Sensors of light and color
- Magnetic sensors
- Medical sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Gravity modules