Proper lighting of a workshop is extremely important for many reasons - not only it improves the quality of work performed, because it allows to see more details, but also has a positive effect on the health of eyes. In combination with the right image magnification it enables precise manipulation, which is especially important during soldering or precise measurements. In this category you will find universal workshop lighting, which will be useful not only in an electronics technician's workshop, but also in a beautician's office or a craft studio.
Cytron SmartDriveDuo MDDS10 - two-channel 35V / 10A motor controller
Index: CTN-12406
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Oświetlenie warsztatowe - Lampy do warsztatu
Products: 13
Loading...
Helping hand - Holder with magnifying glass and LED backlight - ZD10M
Mounting handle with a magnifying glass x2, clips, a spring for a soldering iron, a spot for the tip cleaner and LED backlight.
Index: NSZ-01527
Index: NSZ-01527
Mini flashlight 9LED Altair Esperanza EOT004M - 1W
The flashlight is equipped with 9 LEDs 1 W. It comes in very handy, for example, when you are searching for electronic elements in a dark basement. :)
Index: NSZ-06074
Index: NSZ-06074
Bracket on a jib with magnifying glass and LED backlight - third hand ZD-10Y
Bracket with a magnifying glass, grippers, spring for the soldering iron, cleaner and sponge for cleaning the tips, place for resin and LED backlight.
Index: LUT-04163
Index: LUT-04163
Desk lamp with 5D magnifying glass and LED backlight - Rebel
Lamp with magnifying glass for mounting on table top. The magnifying glass has a diameter of 120 mm and magnification is 5 dioptres.
Index: NSZ-06717
Index: NSZ-06717
Helping hand - Holder with magnifying glass and LED backlight - ZD-126-2
Easy and convenient holder with magnifying glass x3.5 diopters, clips, spring for the soldering iron, spot for tip cleaner and LED backlight.
Index: NSZ-01712
Index: NSZ-01712
Waterproof flashlight Sirius Torch Cree Q5 Esperanza EOT003 - 5W
Waterproof flashlight equipped with an LED diode 5 watts. It has three lighting modes and the ability to adjust the width of the light beam. It comes in very handy when you are...
Index: NSZ-06073
Index: NSZ-06073
Desk lamp on a stand with 5D magnifying glass and LED 30 SMD backlight NAR0460-2
The table lamp is placed on a stable base. Equipped with a magnifying glass with a diameter of 100 mm to obtain a magnification of 5 dioptres. The device is useful for...
Index: LEC-16827
Index: LEC-16827
Desk lamp on a stand with 5D magnifying glass and LED 60 SMD backlight NAR0465-2 - Rebel
Lamp with bright LED backlight and 5 diopter magnifying glass . Fixed to flat surfaces with a metal clamp. The movable arm allows easy adjustment of the illumination angle....
Index: LEC-16837
Index: LEC-16837
A lamp with a magnifying glass adapted for mounting on table tops from 0.5 cm to 6 cm thick. The magnification of the object under observation is achieved through the use of a...
Index: GTK-20182
Index: GTK-20182
Table lamp with 3D magnifying glass, illuminated 56 LED - MA1004F
A lamp with a stand to be placed on a desk or a table top. It is equipped with a magnifying glass with a magnification of 3 dioptres (x1,25) , the glass lens has dimensions of...
Index: GTK-20575
Index: GTK-20575
Desk lamp on a stand with 5D magnifying glass and LED 60 SMD backlight NAR0463-2
LED-backlit lamp mounted to the table top with a magnifying glass with 5 dioptres magnification. A metal clamp ensures that the lamp is securely attached to the desk. The...
Index: LEC-16835
Index: LEC-16835
A lamp with a magnifying glass adapted for mounting on table tops from 0.5 cm to 6 cm thick. The magnification of the observed object is carried out through the use of a...
Index: GTK-20181
Index: GTK-20181
Table top lamp with 8D magnifying glass and LED backlight
Lamp with magnifying glass for mounting on the desk top. Diameter of the magnifying glass is 127 mm, increase of 8 diopters.
Index: NSZ-11942
Index: NSZ-11942
Lamps with a magnifying glass
Great convenience and space saving is provided by workshop lighting mounted directly to the edge of the worktop - such a construction not only eliminates the problem of finding space for the (often large) lamp base, but also significantly increases the range of its movement, so that one lamp can operate even a long table, e.g. a soldering station and a handy mechanical workshop. In our offer you will find tabletop lamps with energy-saving and safe LED lighting, also equipped with lenses of 3, 5 or even 8 dioptres. We also have perfectly balanced, classic magnifier lamps with a solid base to prevent the device from tipping over.
Mini-workshop, all in one
Third hand" type holders are a great option for workshops with very limited space. As it is commonly known, an electronics technician always lacks an extra hand - while one is holding a soldering iron and the other a pair of tweezers or tin, he is no longer able to hold the soldered board by himself. In such a situation, holders equipped with adjustable, freely adjustable grippers, combined with a magnifying glass (in better models also with a light) and, of course, mounted on a solid, heavy base come to the rescue. In our offer you will find several devices of this type, which, in addition to the mentioned functions, also have built-in stands for soldering irons and even a place to put a sponge or a wire cleaner. Such an equipped "third hand" is much more than just a workshop light - it's a miniature workshop.
Other workshop lights
For field work in the basement, attic, garage, or any other location, we recommend a variety of flashlights and portable workshop lights. They allow you to work comfortably and keep your hands free for any repair, renovation or inspection tasks. Especially useful will be LED workshop lamp with magnet, equipped with 24 LEDs and a hook for hanging. For work in difficult conditions, it is worth to have at hand the waterproof Sirius Torch Cree Q5, equipped with a very powerful 5W LED and adjustable beam angle.