DFRobot Gravity: digital signal isolator IB05_XT-W75R3 I2C

Index: DFR-12627 EAN: 5904422377175

Digital isolator of signal I2C ffrom series Gravity. It protects the sensors from electrical interferences causing a read error through the isolation of I2C signal and providing isolated power to the sensor.

DFRobot Gravity: digital signal isolator IB05_XT-W75R3 I2C
€17.14
€13.94 tax excl.
Available
Check quantity
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: DFRobot
Compatibility: Arduino

Description

Digitalisolator of signal I2Cffrom series Gravity. It protects the sensors fromelectrical interferencescausing a read error through theisolation of I2C signaland providingisolated powerto the sensor. Interferences of this type can occur, for example, in the case of using several sensors of the purity of water or the pump where the medium is a conductive fluid.The set includes 2 4-pin goldpin connector and 2 wires suitable forGravity DFRobot IO Expansion Shieldand modules from series Gravity. In our offer, we also have ananalog isolator.

cyfrowy izolator grove

Note:

  1. The module must be powered with 5 V
  2. Module, during operation, consumes a lot of current up to 150 mA, it is better to use an external power source
  3. The sensor and the microcontroller (e.g. Arduino) are isolated, do not connect them together
  4. The module can become hot during operation

Pins

The system has four pins on special connectors, to which the wires are in the kit.

cyfrowy izolator sygnalu i2c

No. Pin Description
1 + Supply voltage: 5 V.
2 - The ground of the system.
3 C Clock line of I2C interface.
4 D Data line of I2C interface.
5 + Isolated supply voltage: 5 V.
6 - Insulated ground of the system.
7 C Insulated clock lineof the I2C interface.
8 D Insulated data line of the I2C interface.

Specification

  • Working voltage: 5 V
  • Connector type: PH2.0-4P
  • Interface: I2C (IIC)
  • Dimensions: 42 x 32 mm
  • The end is uninsulated (Arduino page)
    • Supply voltage: 5± 0.15 V
    • Current consumption with no load: 15mA
  • The end is isolated (side of sensor)
    • Output voltage: 5± 0.15 V
    • Output current: 150 mA

Sensor - type relay

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

DFRobot Gravity: digital I2C multiplexer - 8-channel

Module with multiplexer that allows you to connect 8 different digital I2C buses to one interface, for each, there are separate pins SDA (bus of data line) and SCL (clock line...
Index: DFR-12628
Index: DFR-12628
Available
Check quantity
Regular price €7.79 Price €7.79

Grove - push button with backlight - yellow

Module from the Grove is equipped with a button with a yellow led. It is powered with the v oltage from 3.3 V to 5 V. It  has the Grove connector that allows for the direct...
Index: SEE-12596
Index: SEE-12596
Available
Check quantity
Regular price €3.04 Price €3.04

DFRobot Gravity converter prądowo current-voltage 0-25/0,3V

Module from the Gravity series enables the processing of the current signal from 0 mA to 25 mA into a voltage signal from 0 V to 3V. The sensor may be connected to the...
Index: DFR-12471
Index: DFR-12471
Available
Check quantity
Regular price €5.62 Price €5.62

Grove - mini limit sensor with roller

Module from the Grove series equipped with a limit switch with lever ended with roller. Working voltage is 3.3 V and 5 V. T he kit includes a cable adapted to Seeedstudio Base...
Index: SEE-11335
Index: SEE-11335
Available
Check quantity
Regular price €3.84 Price €3.84

Grove - force sensor FSR402 with module - 2kg

Module from the Grove series, is equipped with a sensor of pressure force FSR402. The sensor communicates with the analog voltage signal. It is able to detect a pressure in...
Index: SEE-12595
Index: SEE-12595
Available
Check quantity
Regular price €18.45 Price €18.45

Soldering station Zhaoxin 858D - 700W

Hot air soldering iron  with the power of 700 W, with LED display. The device features a compact housing which takes up little space. The station has adjustable temperature...
Index: LUT-07154
Index: LUT-07154
Available
Check quantity
Regular price €43.18 Price €43.18

Solder in tube 3g / 0.3mm

Tin 0.3 mm in a tube.
Index: NSZ-09782
Index: NSZ-09782
Available
Check quantity
Regular price €1.50 Price €1.50

Solder Cynel LC60 100g/0,25mm

Tin solder wire with a flux with a diameter of 0.25 mm in coil weight of 100 g.
Index: NSZ-03240
Index: NSZ-03240
Available
Check quantity
Regular price €16.86 Price €16.86

5in1 set - 5x desoldering wick + dispenser

Wick for removing tin excess. A width of 1.5 mm, and a length of 1.5 meters. In the kit there is a dispenser facilitating the use of the wick, as well as 4 spare wicks.
Index: NSZ-07692
Index: NSZ-07692
Available
Check quantity
Regular price €6.27 Price €6.27

Tin sucker ESD antistatic ZD-108

A device for removing tin excess. Model ZD-108 is antistatic and has a large compartment for storage. Length of the device is 320 mm.
Index: LUT-05691
Index: LUT-05691
Available
Check quantity
Regular price €6.49 Price €6.49

Electric solder sucker ZD-211 40W

A device for removing tin excess. Itfacilitates desoldering of electronic components from printed circuit boards. Model ZD-211 has a metal case with a diameter of 20 mm and...
Index: LUT-03983
Index: LUT-03983
Available
Check quantity
Regular price €8.18 Price €8.18

Soldering tip 15/2mm for tin sucker

Tip for tin sucker with a length of 15 mm and a hole diameter of 2 mm.
Index: LUT-03982
Index: LUT-03982
Waiting for confirmation of delivery date
Regular price €0.74 Price €0.74

Products from the same category

Gravity - I2C hub splitter - 8 ports - DFRobot DFR0759

I2C hub splitter allows to connect several modules and peripherals to one I2C connector. Thanks to DFR0759 hub you have possibility to connect up to 8 Gravity series...
Index: DFR-19018
Index: DFR-19018
Available
Check quantity
Regular price €1.63 Price €1.63

DFRobot Gravity - MCP4725 D / A converter 12-bit I2C

Module with 12-bit analog-to-digital MCP4725 converter with EEPROM memory. It can precisely convert the digital signal into corresponding analog voltage signal. The analog...
Index: DFR-12049
Index: DFR-12049
Waiting for confirmation of delivery date
Regular price €5.40 Price €5.40

Gravity - IO Shield - extension for FireBeetle M0 and ESP32-E - DFRobot DFR0762

The extension provides a convenient connection between DFRobot Gravity sensors and FireBeetle 2.0 series. It offers the most commonly used ports , including digital,...
Index: DFR-20375
Index: DFR-20375
Available
Check quantity
Regular price €5.62 Price €5.62

DFRobot Gravity: module with EEPROM memory - I2C - 256kB

Module EEPROM from series Gravity, allows for memory expansion on the data with 256 KB in Arduino. Communication via the I2S interface. It saves data during a power outage. The...
Index: DFR-13242
Index: DFR-13242
Available
Check quantity
Regular price €7.14 Price €7.14

Gravity - I2C - 2x UART converter - DFRobot DFR0627

A module that allows to derive two UART interfaces from the I2C interface. The maximum transmission speed is 1 Mb/s , each UART interface has an independent FIFO buffer...
Index: DFR-17311
Index: DFR-17311
Available
Check quantity
Regular price €9.09 Price €9.09

DFRobot Gravity - analog signal isolator

The module prevents the operation interference of the sensors through the insulation of the analog signal and providing an isolated power for sensors. It is supplied with the...
Index: DFR-09529
Index: DFR-09529
Available
Check quantity
Regular price €23.65 Price €23.65

DFRobot Audio Analyzer

The module is equipped with an equalizer MSGEQ7. It a llows you to add audio detection for Arduino sound. It has 7 frequency bands: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.25...
Index: DFR-07443
Index: DFR-07443
Waiting for confirmation of delivery date
Regular price €18.21 Price €18.21

DFRobot Gravity - RTC SD2405 I2C - real time clock module

Module with real time clock SD2405 has a dual power supply system, when there is a lack of the main power supply, the module automatically switches to battery power.
Index: DFR-09380
Index: DFR-09380
Available
Check quantity
Regular price €9.53 Price €9.53

DFRobot Gravity - adapter for the GP2Y1010AU0F dust sensor

Adapter for the direct connection of the sensor GP2Y1010AU0F using the Gravity interface for Arduino without additional modules and the prototype board.
Index: DFR-11282
Index: DFR-11282
Available
Check quantity
Regular price €4.23 Price €4.23

DFRobot Gravity converter prądowo current-voltage 0-25/0,3V

Module from the Gravity series enables the processing of the current signal from 0 mA to 25 mA into a voltage signal from 0 V to 3V. The sensor may be connected to the...
Index: DFR-12471
Index: DFR-12471
Available
Check quantity
Regular price €5.62 Price €5.62

Gravity: ADC converter ADS1115 16-bit - 4-channel

Module made by the Gravity features a 16-bit analog-to-digital converter ADS1115.
Index: DFR-12472
Index: DFR-12472
Available
Check quantity
Regular price €20.40 Price €20.40

DFRobot Gravity: digital I2C multiplexer - 8-channel

Module with multiplexer that allows you to connect 8 different digital I2C buses to one interface, for each, there are separate pins SDA (bus of data line) and SCL (clock line...
Index: DFR-12628
Index: DFR-12628
Available
Check quantity
Regular price €7.79 Price €7.79