Product description: Odroid Go Ultra - portable game console - Clear White
The Odroid Go Ultra portable game console was based on components that can be found in the Odroid N2+ minicomputer. The console was closed in a transparent casing. The external dimensions and display dimensions of the portable console are the same as in the previous version - Odroid Go Super. Internal components have been improved to improve console performance. The PCB shape of the board has also not changed, but the electronic circuit has been completely redesigned. The board requires the use of a heat sink to dissipate heat from the more efficient processor that the Odroid Go Ultra console is equipped with.
A small, portable game console Odroid Go Ultra.
Odroid Go Ultra block diagram.
System installation
The manufacturer recommends using Linux Ubuntu with the emulator. A properly prepared system is available on the manufacturer 's website. In order to install the system, enter the module into Recovery mode. In order to start this mode, turn off the console, then simultaneously press two buttons: left trigger 2 and right trigger 2 and turn on the device. After entering the recovery mode, connect the Odroid Go Ultra console to the computer via USB type C and upload the system to the mounted memory visible in the computer.
Odroid Go Ultra Specifications
- Processor: Amlogic S922X Quad-Core Cortex A73 (2.2 GHz) and Dual-Core Cortex A53 (2 GHz), ARMv8-A architecture with Neon and Crypto extensions
- GPU: Mali-G52 with 6 execution engines (846MHz)
- OS: Ubuntu 20.04.4, Kernel 4.9.277 Aarch64
- RAM memory: 2 GB LPDDR4 1608 MHz, 32-bit bus
- Storage: 16 GB eMMC, microSD card slot (UHS-I)
- Display: LCD TFT 5" 854 x 480 px (wide viewing angle, MIPI-DSI interface)
- Audio: stereo headphone jack, mono speaker 0.5 W / 8 Ω
- Battery: Li-Pol 3.7 V / 4000 mAh (76.5 x 54.5 x 7.5 mm), up to 6 hours of continuous play
- Power supply: 5 V via USB type C (USB A - USB C cable for charging the battery included)
- External IO: USB 2.0 Host x 1
- Buttons: F1, F2, F3, F4, F5, F6, A, B, X, Y, D-pad, Left Shoulder, Right Shoulder, Left Shoulder2, Right Shoulder2, Analog Joystick, Analog Joystick 2
- Wireless connectivity: optional USB WiFi/Bluetooth adapter
- Energy Consumption:
- gaming: 800mA to 1300mA (depending on backlight brightness, type of game and wireless usage)
- standby mode (power off): up to 1 mA
- Charging time:
- from 3 h to 4 h (device off)
- from 6 h to 7 h (during work)
- Dimensions: 204 x 86 x 25mm
- Weight: 299g
Kit contents
- Odroid Go Ultra - portable game console - Dim Gray
- USB C - USB A cable
Odroid Go Ultra PCB. Useful links |
