Product description: PEI spring steel plate - for Prusa Mini+ printers - satin
Plate made of spring steel, coated on both sides with powder-coated PEI. It has a satin surface (slightly textured), which provides optimal adhesion when using PLA and PETG filaments. It can also be used to work with ABS, ASA, FlexFill 98A, PC, among others (in most cases without the use of separator - e.g. glue). It is mounted on the magnetic heating table of 3D printer. The product is an original Prusa consumable part. It is compatible with the Prusa Mini+ model.
PEI spring steel plate - for Prusa Mini+ printers - satin.
PEI plates are a consumable part of the 3D printer and are not covered by the manufacturer's warranty, because the feature of their coverage is gradual wear. The exception is when the product defect occurred due to a manufacturing or material defect. Cosmetic damage including scratches, dents, cracks and others are also not covered by the warranty. Only discs delivered with manufacturing defects are covered by the warranty.
Thebottom of the print is made on a plate with a satin surface.
Features of the PEI spring steel satin plate
- Works great with PLA and PETG filaments
- Has a slightly textured surface
- Does not require the use of a glazing fluid when printing PETG
- No separator (e.g. glue) required for FlexFill 98A printing
- Wide range of compatible materials, including PC Blend (polycarbonate)
- Easy to maintain. Provides excellent adhesion during 3D printing
Directions for use
- Do not use acetone to clean the plate. It causes microcracks on the PEI surface, damaging it
- Prints with ASA, PC Blend require brim / skirt / cover around the print
- Requires changing Live Z values if another type of plate was previously used in the 3D printer
- The satin surface of the plates is very delicate. Do not use sharp tools to peel off finished models
PEI spring steel satin plate specifications
- Application: Prusa Mini+
- Material: spring steel with PEI coating on both sides
- Surface: slightly textured
- It works especially well for long-term printing with the following felts: PLA, PETG, ABS, ASA, FlexFill 98A, polycarbonate (PC)
- Dimensions of the working surface: 180 x 180 mm
The manufacturer has prepared a detailed list of application of particular types of spring steel plates with specific types of felt.
The plate is an original consumable part of Prusa.
