Product description: Raspberry Pi 4B aluminium housing with fan - Argon ONE M.2 - grey.
Aluminum housing ONE M.2 forRaspberry Pi 4B. It is equipped with two HDMI ports, heat sinks and a fan (30 x 30 mm), which ensures maximum cooling of the minicomputer and is programmable. It allows to connectM.2 SSDswith Key-B or Key-B & M to raspberry. Thanks tothe power buttonon the chassis, you can easily switch on and off the minicomputer without having to unplug the power cord. In addition, the module located inside the enclosure allows you to use one of two power management modes - default startup mode and "always on" mode. The product also supportsinfrared control, which can be programmed and configured according to your preferences. All connectors have been moved to the rear of the enclosure, making cable management much easier. The GPIO connectors are also located at the back of the case under a special magnetic flap that protects them from possible damage or dust when not in use. The manufacturer has marked all GPIO pins in detail, which makes it even easier to work with them. All necessary installation information is included in the manual.
Raspberry Pi 4B aluminium case with fan - Argon ONE M.2 - grey.
Power button in ONE M.2 case.
Power button
The enclosure is equipped witha power buttonthat allows you to easily switch on, safely switch off, restart or force the Raspberry Pi 4B minicomputer off.
Easy access to GPIO
In the upper part of the casing there isan additional boardthat leads all GPIOminicomputerpins to the back of the casing. The connectors are covered with an easy to disassemblemagneticflap. In addition there is a description of all the connections.
Quick and easy access to the GPIO.
Contents of the Raspberry Pi 4B case set.
Case specification
- Compatible with Raspberry Pi 4B
- Plastic base
- Aluminium upper case
- Support for M.2 SSDs
- UASP support for fast data transfers from the minicomputer
- Two full-size HDMI connectors
- Built-in power button
- Two modes of energy management
- Programmable raspberry infrared support with improved options
- Built-in fan: 30 x 30 mm (programmable with Argon ONE)
- Passive cooling - the aluminium alloy top case acts as a large heat sink to dissipate heat from the Raspberry Pi 4 processor
- Access to the GPIO with additional exit markings
- All ports are at the back of the case
- Dimensions: 105 x 94 x 41 mm
Set contents
- Argon ONE M.2 housing
- USB 3.0 adapter
- M.2 to USB 3.0 adapter
- Operating Instructions
- Magnetic cap on the GPIO
- Audio/video PCB as extension
- Thermal conductive tapes
- Mounting screws
How to install Argon ONE Pi 4
- Connect to the Internet.
- Start the terminal of the Raspberry Pi OS.
- To initiate the installation ofArgon ONE Pi 4, enter the following command into theterminalconsole and confirm with theEnterkey:
curl http://download.argon40.com/argon1.sh | bash
- Restart the device.
Useful links |
