Product description: Raspberry Pi M.2 HAT+ - an overlay for NVMe drives and M.2 accessories for Raspberry Pi 5
The Raspberry Pi M.2 HAT+ allows you to connect M.2 peripherals such as NVMe drives and AI accelerators to the PCIe 2.0 interface on the Raspberry Pi 5 . Provides fast data transfer up to 500 MB/s . The overlay is an adapter that allows conversion from a 16-pin 0.5 mm FPC connector to the M.2 standard, supporting the 2230 and 2242 formats for devices with an M key. The adapter can supply up to 3 A of current to connected M.2 devices. Raspberry Pi M.2 HAT+ is automatically detected by the latest Raspberry Pi software/firmware. The overlay is supplied with a 16 mm connector and spacers, so it can be used with active cooling of the Raspberry Pi (Active Cooler). Raspberry Pi M.2 HAT+ is the perfect solution for Raspberry Pi 5 users who are looking for an efficient solution to expand their system with fast NVMe drives or AI accelerators.
Raspberry Pi M.2 HAT+ - an overlay for NVMe drives and M.2 accessories for Raspberry Pi 5.
M.2 Accessory Adapter for Raspberry Pi 5.Main features of Raspberry Pi M.2 HAT+
- Supports PCIe 2.0 interface with transfer speeds up to 500 MB/s.
- Support for M Key M devices and 2230 and 2242 formats.
- Possibility to power M.2 devices with a current of up to 3 A.
- Compatible with Raspberry Pi HAT+ .
- Equipped with a power and activity status LED.
- Includes ribbon cable, 16 mm connector, spacers and screws.
Principles of safe use of the M.2 HAT+ overlay
When using the Raspberry Pi M.2 HAT+, certain rules must be followed to ensure safe and proper operation of the device:
- The overlay should only be connected via the PCIe interface to Raspberry Pi.
- Any external power source must meet applicable standards and regulations in the country of use.
- The device should be operated in a well-ventilated area and not covered if used in an enclosure.
- The cover should be firmly attached and protected against contact with conductive objects.
- Connecting incompatible devices may damage the overlay and void the warranty.
- All peripherals used should comply with safety standards.
- The device should be operated under adult supervision.
The M.2 HAT+ shield connects to Raspberry Pi 5 via the PCIe connector.
Shield for drives and other M.2 peripherals for Raspberry Pi 5.What is M.2?
M.2 is an interface standard that allows you to connect a variety of peripheral devices, such as SSD drives, network cards or AI accelerators, to computer motherboards and other electronic devices. M.2 is particularly appreciated for its compact design, which allows installation in small devices such as laptops or miniature computers. It supports various data transfer protocols, including SATA and PCIe, thus offering flexibility and high data transfer efficiency.
Raspberry Pi M.2 HAT+ specifications
- Power supply: PCIe 2.0 / GPIO Raspberry Pi 5 connector
- Maximum data transfer speed: up to 500 MB/s
- Maximum current for M.2 devices: 3 A
- Supported formats: 2230, 2242
- Dimensions: 65 x 56.5 mm
Set contents
- Raspberry Pi M.2 HAT+
- FPC ribbon cable
- 40-pin GPIO connector with 16 mm long pins
- M.2 accessory mounting screw
- Screws and spacers
Contents of the Raspberry Pi M.2 HAT+ kit.
