Description
The switch with the lever equipped with 2 contacts with load capacity of 20 A and 12 V. Pins pitch is 24.2 mm, total height is 66 mm. The switch has white backlight. The LED is powered with the voltage of 3 V.
Connection
- Control od the ON/OFF switch is performed by using two pins on the bottom.
- If the LED should be lit all the time, it is necessary to apply the voltage from 3 V to 12 V between ground and headlight pin.
- If the LED should be lit only when the switch is connected, it is necessary to apply the voltage from 3 V to 12 V on the pin (+) and connect a ground to the ground of the pin.
Specification
- Number of positions: 2
- Number of contacts: 2
- Pitch of pins: 24,2 mm
- Type: On-Off for soldering the wires
- Backlight color: white
- Contact load: 12 V / 20 A (recommended 1-2 A)
- The supply voltage of the LED: from 3 V to 12 V
- Dielectric strength: 1500 VAC - 1 minute
- Insulation R: 500V DC 100 M min.
- Service life: 10,000 cycles
- Operating temperature: -25 °C to 85 °C
- Dimensions: 66 x 50 x 18 mm
- Weight: 36,3 g
Useful links |
