Filament set - Rosa3D Refill PLA-CF Matt Home Decor 1,75mm 4x 1kg
Index: ROS-27713
- New
- Reduced price
- Pack
- Sale
- New
- Reduced price
- Sale
M5Stamp Pico DIY Kit - development kit with ESP32-PICO-D4 - M5Stack
Index: MSS-20159
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 12
Loading...
Extension cord for servos 45cm twisted
Extension cable with the length of 45 cm ended with the standard plug for the servos. It has twisted cables.
Index: KAB-01717
Index: KAB-01717
Monolithic capacitor 470nF/50V X7R - 10pcs.
The monolithic capacitor 470 nF / 50 V. Pins' pitch: 5 mm. Length with pins: 14 mm. Price for 10 pieces.
Index: PAS-05584
Index: PAS-05584
Lanberg Ethernet Patchcord UTP 6 0,25m - grey
Patchcord with a length of 0.25 m in grey color. Cable - twisted pair in category 6 Ethernet with RJ45 connectors installed. It has a cover that protects it from breaking.
Index: IMP-14353
Index: IMP-14353
Electrolytic capacitor 47uF/25V 5x11mm 105C THT - 10pcs
47 uF /25 V through-hole electrolytic capacitor. Leads raster: 2mm. Size: Ø 5 x 11mm. Price for 10 pieces.
Index: PAS-00265
Index: PAS-00265
Set of breadboard 830 + cables + power module
The kit includes a contact plate with 830 holes, power supply module and cables. These elements allow for creating connections on the board itself as well as between it and the...
Index: PLY-01670
Index: PLY-01670
4-pin plug for printing, pitch of 2.54 mm. The set includes 5 x 4-pin plugs.
Index: KAB-06774
Index: KAB-06774
D-SUB 15 male plug for the cable is used, for example, as the GamePort connector.
Index: KAB-06999
Index: KAB-06999
ON-OFF switch monostable - PBW-19BS - 2A / 250V flat
Monostable flat button with a loading capacity of contacts: 2 A for 250 V.
Index: AKS-12070
Index: AKS-12070
Power cable adapter IEC - Schuko (F) for UPS 20cm - black
Adapter for the power cable with IEC 320 C14 on Schuko, with the length of 20 cm, it is mainly used for PC and server computers, and power supplies for laptops, UPS and any...
Index: IMP-13202
Index: IMP-13202
Raspberry Pi camera tape - 30cm 15-core 1mm raster
Tape with a length of 30 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-01909
Index: RPI-01909
D-SUB 9 male plug for the cable is used, for example, for communication via the RS232 protocol.
Index: KAB-02456
Index: KAB-02456
Fuse with lever for printing equipped with 2 contacts with load capacity of 10 A / 250 V. It has a reset function, when exceeding the rated current of 10 A. Pins pitch is 18...
Index: UCC-08394
Index: UCC-08394
Small token - RFID identifier in the form of pill with a diameter of 25 mm. Small size allows for sewing it into clothing or for closing in any case. The carrier frequency...
Index: DNG-10707
Index: DNG-10707
HX711 - amplifier for tensometers
Operational amplifier is designed to handle strain beams. The system is supplied with the voltage from 2.6 V to 5.5 V, communicates via a two-wire bus: the data line and a...
Index: DNG-12479
Index: DNG-12479
Module PCF8574 - GPIO expander board for microcontroller - Waveshare 3708
The module allows you to increase the number of GPIOs (up to 8 more) of a microcontroller (e.g. Arduino module). Communicates on the I2C bus (TWI).
Index: WSR-04455
Index: WSR-04455
Index: KAB-04999
Set of cables male plug with hooks - 2 pcs.
Set of 2 wires: black and red with the length of 25 cm , ended on the one side with the male plug , on the other, with the hook .
Index: KAB-05129
Index: KAB-05129
ON-OFF bistable switch 12mm - 5A/250V - round - black
Round switch, bistable, black. Contact rating 5 A at 250 V or 8 A at 125 V .
Index: DNG-10925
Index: DNG-10925
DIY HDMI adapter - straight - Waveshare 14474
DIY HDMI adapter from Waveshare designed to build cables that allow you to transmit audio and video data. The adapter has a socket for the FFC cable and a male HDMI plug to...
Index: WSR-22132
Index: WSR-22132
Index: KAB-00647
Flipper Zero Wifi Devboard - WiFi
Flipper Zero Wifi Devboard is a module that extends the capabilities of the Flipper Zero device with WiFi communication. It is based on the popular ESP32-S2 system, with...
Index: LAB-23581
Index: LAB-23581
Zener diode of 0,5 W and voltage of 3,3 V. Price for 10 pieces.
Index: PAS-04933
Index: PAS-04933
Plug DC 5,5/2,1mm with cable 1,5m - 24AWG
2-vein cable, 1 m long with straight plug DC 5,5 / 2,1 mm.
Index: DNG-13749
Index: DNG-13749
Set of THT electrolytic capacitor justPi - 107 pcs.
A set of 12 most popular values of justPi electrolytic capacitors, useful in every workshop. Contains 107 pieces of capacitors of different voltages and dimensions....
Index: JUS-21743
Index: JUS-21743