ELECTRONICS - Strona 25
Cytron MD10C - single-channel 30V / 13A motor controller
Single channel DC motor controller. Continuous current per channel 13 A (momentary 30 A). Supply voltage from 5 V to 30 V .IDC adapter 10pin 1.27mm - Molex PicoBlade 1.25mm + v2 connectors for PMS7003 sensor
The adapter allows for signal transmission from the connector IDC 10 pin on Molex PicoBlade connector with a pitch of 1.25 mm and has four soldered goldpin pins of 2.54 mm....LED 5mm yellow - 10pcs. - justPi
Set of 10 pieces of yellow LEDs. The diameter of the lens is 5 mm. The diodes emit radiation in the visible light range. They are designed for THT through-hole mounting. The...Set of M3 spacers - set E - 80pcs. - justPi
A set of M3 copper spacers . The elements enable the attachment of e.g. printed circuit boards, brackets and modules. They allow you to keep the same distances when...Prototype boards for Flipper Zero 3pcs.
Prototype boards for Flipper Zero that have been specially designed for direct connection to GPIO connectors. They allow you to control them without the need for...Darlington TIP122 100V/5A NPN bipolar transistor - 5pcs.
The TIP122 is an NPN Darlington bipolar transistor that supports a collector current of up to 5 A and a collector-emitter voltage of up to 100 V , offering a high current...Male pin for case raster 5,08mm 10pcs
A set of ten male pins for the slot's case, pitch of 5,08 mm.UART Converter - RS485 3.3V - ARK/RJ11 - Waveshare 4777
Converter allows you to connect the microcontroller via the RS-485 bus which supports up to 32 devices on a line length up to 1 km with a speed up to 10 Mbps. The module is...Arcade Push Button 3,3cm black case - yellow with backlight
Button with an outer diameter of 33 mm and height of 60 mm with integrated LED illuminating the dome in the yellow color. To the button attached is a simple limit switch.Ring LED RGB WS2812B 5050 x 24 diodes - 90mm
A ring of 24 individually addressable 5050 RGB LEDs with integrated driver. One pin of the microcontroller is enough to operate the module. The outer diameter of the circle is...Strip LED SMD2835 IP65 4,8W, 60 LED/m, 8mm, cold white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 4.8W/m, density of 60 diodes per meter. The color of the light is cold white. Protection factor...- Reduced price
- SPECIAL OFFERS
Optoisolation relay module 6 channel - 10A/250VAC contacts - 5V coil
The module has six SRD-05VDC-SL-C relays with a coil powered with a voltage of 5 V along with optoelectronic insulation. The system allows you to control actuators with...Pin for socket 2,00mm - 10pcs.
A set of ten female pins slot's case, pitch of 2.00 mm.Magnetic sensor - reed contact CMD1263 + screws
Wired proximity sensor activated magnetically. Case dimensions - 12 x 63 mm.40-pin straight female socket for BBC micro: bit
40-pin, female slot used in Micro:bit. Terminal pitch of 1.27 mm. Slot is installed at an angle of 180°.Rotary potentiometer 200kOhm linear 1/5W B200k - 5pcs.
The carbon-coated linear rotary potentiometer has three leads that match the contact plates. Connected to the microcontroller's analog-to-digital converter, it can be used as...Connector goldpin 1x40 angular 2,54mm raster - black - 10pcs. - justPi
Male goldpin plug with pins angled out. The pin arrangement is 1x40 single row . The pins' pitch is 2.54 mm , and the plug housing is black . The goldpin connector...LED 5mm holder - nylon long - 10pcs
Long nylon LED holder 5 mm. The subject of the sale is the holder , the LEDs can be purchased separately. Price of 10 pcs.USB-UART converter CP2102 - USB plug - Waveshare 11079
Converter which provides communication between the serial interface, USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers....Zener diode 1.3W 5.1V - 10pcs.
Zener diode with a power of 1.3 W and a voltage of 5.1 V. The set includes 10 pieces.
