- New
Pakiet filamentów Devil Design - czarno-biały PLA + PETG - 10szt.
Index: DEV-27744
- New
- Reduced price
- Pack
- Sale
SenseCAP S2106 - water pH sensor - LoRaWAN - Seeedstudio 101070001
Index: SEE-22928
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 40
Loading...
Electric cube 12pin 4mm 3A/250V
The 12-pin electric cube allows you to connect the wires with a voltage of 250 V with the flow of current up to 3 A. Connection pitch is 8 mm, the maximum diameter of the cable...
Index: KAB-06894
Index: KAB-06894
Thermostat W1209 with temperature probe -50°C/110°C
Thermostat module with display for controlling devices up to 2300 W based on temperature. Powered by 12 V. Regulates temperature from -50 °C to 110 °C, has outputs of built-in...
Index: SES-07264
Index: SES-07264
Linear voltage regulator LDO 3,3V LD1117A - THT TO220 - 5 pcs
Low-Dropout linear stabilizer. Output voltage: 3,3 V. Maximum output current: 0.95 A. TO220 housing. Sold for 5 pieces.
Index: UCC-07685
Index: UCC-07685
A set of 200 resistors with the 1 W power. Elements are in the through hole THT case.
Index: PAS-08276
Index: PAS-08276
ON-OFF-ON KN3 (B) -223 250V / 6A toggle switch - monostable
Switch with lever for printing, equipped with 6 contacts with the load of 6 A / 250 V or 10 A / 125 V. It enables the activation of two devices at the same time . Pins...
Index: NSZ-08828
Index: NSZ-08828
CJMCU SHT10 - digital temperature and humidity sensor
Humidity and temperature sensor powered with the voltage of 3.3 V. Temperature measurement range is from -40 °C to + 123,8 °C, for the humidity is from 0 to 100 % RH.
Index: MOD-09424
Index: MOD-09424
- Reduced price
- SPECIAL OFFERS
Set of resistors CF THT 1 / 4W described - 600 pcs.
A set of 30 values of 0,25 W through-hole resistors with 5% tolerance, 20 pieces each. The elements are signed, which makes it easier to find the right value.
Index: PAS-09911
Index: PAS-09911
Memory card SanDisk Ultra microSD 64GB 140MB / s UHS-I class 10, A1 with adapter
Popular format of memory card micro SD/SDHC/SDXC card which is used in smartphones, tablets, cameras. Product of class 10, class A1 allows you to install apps, it has an...
Index: BAL-09960
Index: BAL-09960
Set of passive electronic components + organizer
A set of electronic elements required in the design on the breadboards. Set includes i.a.: resistors, capacitors, potentiometers, buttons, and LEDs. All packed in an organizer...
Index: PAS-11726
Index: PAS-11726
PVC wire 0.25mm AWG30 - 8 colors - roll 250m
PVC cable wrapped on a roll. Used e.g. for alarm and intercom systems. Length equal to 250m . The subject of the sale is a roll of 8 cables in various colours ..
Index: GRL-12584
Index: GRL-12584
Velleman K / MOW - set of PVC wire / cable - 10 colors - 60m
Set of PVC wire cables in 10 colors. They are used, for example, for alarm installation. Total cable length is 60 m, AWG 24.
Index: VEL-13012
Index: VEL-13012
Surface socket 2x RJ45 Lanberg - white - cat.6
Socket is used in high-speed networks of IT, it is equipped with two unshielded RJ45 ports from category 6. Surface installation.
Index: IMP-13204
Index: IMP-13204
Lanberg Ethernet Patchcord UTP 5e 0,5m - grey
Patchcord with a length of 0.5 m in grey color. Cable - twisted pair in category 5e Ethernet with RJ45 connectors installed. It has a cover that protects it from breaking.
Index: IMP-14368
Index: IMP-14368
Membrane keypad - 2 coloured buttons - self-adhesive
Keyboard equipped with two colored buttons. Keyboard leads are made in the form of a connection tape finished with 3-pin raster 2.54 mm . Plug located at the end of the...
Index: DNG-16993
Index: DNG-16993
Logic system CD4093BE 4xNAND with Schmitt trigger - 5pcs
Logic system with four NAND gates, with Schmitt's derailleur gears at the output, preventing the system from waking up. The voltage of the system is from 3 V to 18 V. The...
Index: UCC-17147
Index: UCC-17147
Electromagnet holding 12V 4W 45kgf
Holding electromagnet, powered by 12 V. With a standard acceleration due to gravity of 9.8 m/s 2 it maintains a mass of 45 kg . The current consumption of the device is...
Index: DNG-17577
Index: DNG-17577
- Reduced price
- SPECIAL OFFERS
Aluminum Heatsink for Raspberry Pi CM4 Compute Module 4 with thermoconductive tape - black
Aluminium heatsink designed for Raspberry Pi minicomputer ( Compute Module 4 version). Black aluminium heatsink provides good heat dissipation from CM4 board elements...
Index: WSR-19713
Index: WSR-19713
Module with USB type C socket - connector for PCB - Pololu 3411
Module with connector that allows you to connect USB 2.0 data , configuration, SBU and power pins with USB-C type connector to the contact board. Fits standard contact...
Index: PLL-19940
Index: PLL-19940
Water block for cooling 40x200mm - aluminum heatsink for Peltier cells
A large and aluminum water block that is used to cool key components of computer systems such as CPU and GPU with dimensions of 40 x 200 x 12 mm .
Index: DNG-23494
Index: DNG-23494
MT3608 step-up voltage converter - SOT-23-6 - 5pcs.
The MT3608 is a step-up converter IC that steps up the voltage from 2 V to 24 V to a maximum of 28 V at an output current of up to 2 A. It has built-in overcurrent and...
Index: DNG-25083
Index: DNG-25083
Limit switch 50mm - Pololu 1403
SPDT limit switch position with extended metal plate with a length of 50 mm.
Index: PLL-00017
Index: PLL-00017
Force sensor FSR-400 - 2kg round 5mm - Pololu 1695
The force sensor reduces its resistance when the force put to the round tip, accumulates. The sensor is round with a diameter of 5 mm.
Index: PLL-00752
Index: PLL-00752
The kit contains a pair of DEAN connectors - socket and plug.
Index: KAB-01339
Index: KAB-01339
Connecting cables female-male 30cm colored - 50pcs
Set of 50 high-quality connecting cables with a length of 30 cm in different colours.
Index: KAB-01438
Index: KAB-01438