- New
Filament set - Rosa3D Refill PLA-CF Matt Home Decor 1,75mm 4x 1kg
Index: ROS-27713
- New
- Reduced price
- Pack
- Sale
Pakiet filamentów Devil Design - czarno-biały PLA + PETG - 10szt.
Index: DEV-27744
- New
- Reduced price
- Pack
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
Step-Up/Step-Down Voltage Regulator S13V25F9 - 9V 2,5A - Pololu 4983
Index: PLL-23469
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 89
Loading...
Magnetometer GY-271 3-axis digital I2C 3,3V / 5V - QMC5883L
Sensor to measure the magnetic field in three axes in the range of ±8 gauss with a resolution of 5 miles gaus. It works with the voltage from 3.3 V to 5.0 V. It is...
Index: MOD-02722
Index: MOD-02722
Ethernet Patchcord UTP 5e 7,5m - grey
Category 5e Ethernet twisted pair cable, grey with RJ45 connectors, 7.5 m long.
Index: KAB-03463
Index: KAB-03463
The device allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm.
Index: MOD-03661
Index: MOD-03661
The fan with the input voltage of 12 V, current consumption of 130 mA and dimensions of 50 x 50 x 15 mm.
Index: MOT-03872
Index: MOT-03872
Bluefruit LE UART Friend - Bluetooth Low Energy (BLE 4.0) - Adafruit 2479
The board with a Bluetooth Low Energy module and the remote communication interface UART.
Index: ADA-03955
Index: ADA-03955
Waveshare touch display, resistive 5" for the Raspberry Pi with a resolution of 800 x 480 px. Works with Raspberry Pi version 4, 3, 2, B+, Zero, and Zero W via the HDMI...
Index: WSR-04467
Index: WSR-04467
DFRobot Gravity - CO2 carbon dioxide sensor - electrochemical
The sensor determines the concentration of CO2 (carbon dioxide) in the air. It is equipped with digital and analog output that works with voltage of 5 V. The kit includes a...
Index: DFR-04487
Index: DFR-04487
Liquid level sensor - analog + wires - Waveshare 9525
The sensor is used for determining the liquid's level in the vessel. It is powered with the voltage from 2.0 V to 5.0 V. The output is an analog voltage which increases its...
Index: WSR-04503
Index: WSR-04503
GPS module UBX-G7020-KIT + case - DFrobot
GPS UBX-G7020-KT module has a 56-channel GPS receiver, it operates with a voltage from 3.3 V to 5 V. The update frequency is from 1 Hz to 10 Hz. Communication is via the serial...
Index: DFR-04596
Index: DFR-04596
The holding electromagnet powered with the voltage of 12 V with a power of 3.5 W. It holds a weight of 4 kg in standard earth acceleration of 9.8 m/s2. Case diameter is 25 mm,...
Index: MOD-04599
Index: MOD-04599
BMP280 - digital barometer, pressure sensor 110kPa I2C/SPI 3-5V - STEMMA QT - Adafruit 2651
Module with digital barometer from Bosch BMP280. The measurement range is from 300 hPa to 1100 hPa with 1 hPa accuracy. The system is powered with the voltage ranging from 3 V...
Index: ADA-04631
Index: ADA-04631
Molex power cord - 2x SATA - 15cm
The adapter allows for the separation of the MOLEX connector to two SATA connectors. Cable length is 15 cm.
Index: KAB-04638
Index: KAB-04638
Test stand type ZIF for chips with 18 pins. It has a lever, thanks to which the multi-pin socket is crimped. The stand is equipped with gold-plated contacts. The raster between...
Index: UCC-04732
Index: UCC-04732
Test stand type ZIF for chips with 48 pins. It has a lever, thanks to which the multi-pin socket is crimped. The stand is equipped with gold-plated contacts. The raster...
Index: UCC-04739
Index: UCC-04739
- Sale
- SPECIAL OFFERS
NTC 110 100kΩ thermistor with 1m wire
Thermistor of NTC 110 type with a resistance of 100 kΩ. The connecting cable has a length of 1 meter.
Index: SES-04941
Index: SES-04941
LIS3DH 3-axis I2C/SPI digital accelerometer - STEMMA QT - Adafruit 2809
Sensor for measuring acceleration in three axes in the range: ± 2g, ±4 g, ±8 g / ±16 g. Powered with the voltage from 3 V to 5 V. It communicates over the I2C or SPI bus.
Index: ADA-05295
Index: ADA-05295
Raychem RUEF500 polymer fuse 30V/5A 10.2mm raster - 10pcs
Polymer fuse operating with the voltage of up to 30 V, which allows for the flow of the current of up to 5.0 A. The price is for 10 pieces.
Index: KAB-05479
Index: KAB-05479
DFRobot LED Keypad Shield - Shield for Arduino
Shield for Arduino with 4-digit ,8-segment display with common cathode. In addition, the board has 5 buttons. The device operates with 5 V voltage.
Index: DFR-05516
Index: DFR-05516
DFRobot Gravity - an ultraviolet UV analog sensor
The UV light sensor is powered with the voltage of 5 V. The output is an analog voltage, proportional to the intensity of UV light intensity. The sensor can be used to detect...
Index: DFR-05517
Index: DFR-05517
LPG, natural gas and carbon gas sensor MQ-5 module - semiconductor - Waveshare 9531
Module with sensor MQ-5 detecting LPG, natural gas and coal gas . It is powered with the voltage from 2.5 V to 5 V. It has digital and analog output, making it compatible with...
Index: WSR-05522
Index: WSR-05522
Fan 12V 120x120x25mm Molex - blue backlight
Fan with 12 V input voltage, current consumption 160 mA and dimensions 120 x 120 x 25 mm. It has a blue backlight.
Index: MOT-05613
Index: MOT-05613
Fingerprint reader - with STM32F205 32-bit - Waveshare 8552
Module with fingerprint reader communicating through serial interface UART (RX, TX). It has a memory where you can store up to 1000 fingerprints of different people and export...
Index: WSR-05622
Index: WSR-05622
Plastic case Kradex Z3 - 110x150x70mm black
Four-part, universal housing designed for storing electronic circuits. The product was made of polystyrene. For mounting the housing, use the mounting screws included in the...
Index: KDX-05747
Index: KDX-05747
Eight-segment display x2 - 14mm blue - common anode
Dual 8-segment display two digits along with points and some characters.
Index: LCD-06435
Index: LCD-06435