- New
Filament Print-Me Swift PETG 1,75mm 1kg - Raspberry Pink
Index: PRI-25015
- New
- Reduced price
- Promotion
Monostable ON-OFF switch - PBW-16BPD - 2A 250V - flat red point
Index: AKS-10816
- Reduced price
- Promotion
BATT-MAN Click - power manager - LTC3586 - Mikroe MIKRO-2901
Index: SPF-23009
- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
Velleman VMP501 prototype KIT for Raspberry Pi 4B/3B+/3B/2B/Zero
Index: VEL-10722
- Reduced price
- Promotion
- On sale!
- Promotion
SENSORS - Strona 31
Loading...
DFRobot Gravity - ARK adapter for 4pin Gravity sensors - FIT0511
The adapter is designed for 4-pin sensors, optimized for the connection with the Gravity interface. It has two types of power supplies of 3.3 V and 5 V.
Index: DFR-09967
Index: DFR-09967
Cytron Maker Line -Trim with reflective sensors
The Cytron module equipped with 5 reflective sensors (pair : IR diode and phototransistor) is able to track 13 to 30 mm wide lines in white and black. The sensor has 2...
Index: CTN-15462
Index: CTN-15462
ISM330DHCX 6DoF IMU - 3-axis accelerometer and gyroscope - Adafruit 4502
The DoF ISM330DHCX sensor is equipped with a 3-axis accelerometer and a 3-axis gyroscope. It measures linear acceleration within ± 2 / ± 4 / ± 8 / ± 16 g and angular velocity...
Index: ADA-16458
Index: ADA-16458
MPR121 - Gator Breakout touch sensor - 12-channel - capacitive - STEMMA QT / Qwiic - Adafruit 4830
The Gator Breakout sensor allows to detect touch . It is equipped with the MPR121 chip. Made in capacitive technology, it provides the user with 12 channels , which allow...
Index: ADA-19005
Index: ADA-19005
Fermion - analog gas sensor NO, NO2, H2 - MEMS MiCS-2714 - DFRobot SEN0441
An analog sensor for NO, NO2 and H2 gases manufactured by DFRobot. The MiCS-2714 MEMS sensor module can measure hydrogen and nitrogen oxide concentrations. It detects...
Index: DFR-20679
Index: DFR-20679
Stretch sensor - conductive rubber sheet - 200x200x1mm - Adafruit 5463
Tensile sensor in the form of a rubber sheet with dimensions of 200 x 200 x 1 mm. The principle of operation is very simple - the product increases its electrical resistance...
Index: ADA-21827
Index: ADA-21827
Gravity - RGB LED button - DFRobot DFR0991
Module with a button from DFRobot. Thanks to the built-in RGB LED, the button is illuminated in different colors . The module has a built-in Gravity connector with an I2C...
Index: DFR-22461
Index: DFR-22461
Gravity - snap-on 10A/250VAC magnetic relay - for Arduino and ESP32 - DFRobot DFR0996
Magnetic latching relay 10 A / 250 V AC from DFRobot. Compared to other relays, it is distinguished by the fact that it needs two digital pulse signals to switch the ON /...
Index: DFR-22838
Index: DFR-22838
DFRobot Gravity - 2x16 I2C LCD display - blue
LCD display 2x16 characters with backlight in blue. Communicates with two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion Shield.
Index: DFR-12361
Index: DFR-12361
TMP117 - I2C temperature sensor - high accuracy - STEMMA QT / Qwiic - Adafruit 4821
A high precision temperature sensor from Adafruit. It has an embedded TMP117 chip that provides accurate measurement in the range of -55°C to 155°C , with an accuracy of...
Index: ADA-18997
Index: ADA-18997
Human Static Presence - mmWave 24GHz sensor for Seeed Xiao - Seeedstudio 101010001
Human Static Presence is an advanced expansion board for the Xiao series from Seeedstudio . It is an antenna-integrated, highly sensitive radar sensor based on the FMCW...
Index: SEE-24129
Index: SEE-24129
Light intensity sensor - Unit expansion module for development modules M5Stack
Light intensity sensor module equipped with a 10 kΩ photoresistor, whose sensitivity can be adjusted by means of a potentiometer in the module. The resistance of the...
Index: MSS-18083
Index: MSS-18083
- Reduced price
- Promotion
Gravity - 1 kg (10 N) digital pressure sensor - HX711 - Build a scale kit - DFRobot KIT0176
A set of elements for self-assembly , which allow to make an electronic balance . The kit contains a digital pressure sensor, in the form of a strain gauge bar, detecting...
Index: DFR-20415
Index: DFR-20415
Grove - TH02 - I2C temperature and humidity sensor
Temperature and humidity sensor TH02 from Grove with I2C interface. The temperature measurement range is from 0 °C to 70 °C and humidity from 0 to 80% RH .
Index: SEE-04413
Index: SEE-04413
Low Current Sensor ACS723 - 5A current sensor - SparkFun SEN-14544
Current sensor operating in the range from 10 mA to 5 A on the basis of Hall effect. The output is an analog voltage. The supply voltage is 5 V. It has a built-in amplifier and...
Index: SPF-12374
Index: SPF-12374
3-axis magnetometer - TLV493D - STEMMA QT/Qwiic - Adafruit 4366
3-axis magnetometer manufactured by Adafruit and equipped with an efficient TLV493D system. The maximum data transfer rate is up to 1 Mb/s . The module is used when...
Index: ADA-23830
Index: ADA-23830
I2C / UART distance and gesture sensor - 30cm - SparkFun SEN-13162
Module with sensor which enables determination of the distance of the object in two axes X and Z, and hand gestures. With this sensor, you can control the device, for example,...
Index: SPF-09329
Index: SPF-09329
- On sale!
- Promotion
AS7263 NIR - Visible Light Spectrum Sensor - SparkFun SEN-14351
The module is equipped with a sensor of spectrum, i.e. the spectrum of visible light and NIR (near infrared light) that allows you to measure and describe how various...
Index: SPF-10121
Index: SPF-10121
H3LIS331DL 3-axis accelerometer - module - SparkFun SEN-14480
Sensor H3LIS331DL is a 3-axis digital accelerometer. It allows you to measure acceleration in the configurable ranges. It communicates via the I2C or SPI bus, powered from...
Index: SPF-10870
Index: SPF-10870
DFRobot Gravity - TEMT6000 analog light sensor
Analog ambient light sensor TEMT6000, compatible with Arduino. The sensor allows to determine the light density and reflects the analog voltage signal back to Arduino. The...
Index: DFR-11253
Index: DFR-11253
Gravity - Thermocouple MAX31855K - I2C temperature sensor
Module MAX 31855K together with thermocouple allows to measure high temperatures with high accuracy. It o perates in the range from 0 °C to 800 °C with a supply voltage from...
Index: DFR-12473
Index: DFR-12473
EMC2101 - fan and I2C temperature controller - STEMMA QT / Qwiic - Adafruit 4808
Module produced by Adafruit and equipped with EMC2101 chip. Complies with SM Bus 2.0 standard. Enables fan control by PWM pulse width modulator or DAC linear output....
Index: ADA-19006
Index: ADA-19006
FlexiForce Pressure Sensor - 25lbs. (1" area) - SparkFun SEN-11207
Pressure sensor reduces its resistance when the force put to the round tip, increases. The round sensor with a diameter of 25.4 mm, the maximum pressure is 11 kg.
Index: SPF-10118
Index: SPF-10118