Over 15 years

professional experience

Easy returns

up to 30 days

Over 1 000 000

shipped orders

Fast shipping

all across the EU

Order in 12:25:19 and we will ship today!

Wishlist

Stacja lutownicza WEP 853AAA+ - zdjęcie 1

Stacja lutownicza WEP 853AAA+ - zdjęcie 2

WEP 853AAA+ 3in1 soldering station - preheater + soldering tip + hotair with fan

Index: LUT-13245 EAN: 5907558241129

Ask a question

Remove from wishlist Add to wishlist

Soldering station, which is a combination of hotair iron, tip-based soldering iron and heater. It has a total capacity of 1270 W. Equipped with a convenient temperature regulation, cooling system after finishing work, ESD-safe, error detection system. The parameters are controlled using PID-controller and displayed on an easily readable LCD display. It has memory settings and 3 work programmes.

€249.90

€203.17 tax excl.

Notify me when available

Check quantity

Manufacturer: WEP

Description

Soldering station, which is a combination of hotair iron, tip-based soldering iron and heater. It has a total capacity of 1270 W. Equipped with a convenient temperature regulation, cooling system after finishing work, ESD-safe, error detection system.The air blow is implemented using a brushless motor that is in the iron. The parameters are controlled using PID-controller and displayed on an easily readable LCD display. It has memory settings and 3 work programmes.

Soldering station, which combines a hot air iron, a tip-based soldering iron and a heater.

Specification

Supply voltage: 230 V / 50 Hz (network)
Capacity: 1270 W
Memory settings
3 work programmes
LCD display
Control through PID
Rapid heating to a predetermined temperature
Cooling system after work
Convenient adjustment of air flow
ESD-safe
Safe soldering details, sensitive to temperature: QFP, PLCC, BGA

Hotair Soldering Iron

Adjustable temperature hot air from 100 °C to 480 °C
Temperature stability +/-1 °C
The source of air supply: the fan in the iron, based on the brushless motor
Air flow up to 130 l/min
Programming: time, temperature, strength of airflow

Tip-based Soldering Iron

Adjustable temperature soldering tip: 200 °C to 480 °C
Temperature stability +/- 1 °C
Soldering iron power: from 72 to 75 W
Voltage ground: up to 2 mV
Ground resistance: 2 Ω

Heater

Power consumption: 600 W
Temperature range: from 50 °C to 300 °C
Temperature stability +/- 2 °C
The surface of the heater: 120 x 120 mm
Programming: time, temperature

Includes:

Soldering station, heater WEP 853AAA+
Hotair iron
Stand for hotair iron
Tip-based soldering iron + tip T-B
Stand for tip-based iron with sponge for cleaning the soldering tip
Nozzle set:
- round with a diameter of 4.4 mm
- round with a diameter of 7 mm
- round with a diameter of 9 mm
- square 12 x 12 mm
A gripper for lifting circuit
Power cable
The user manual

First run

You should not run the device immediately after delivery.
Equipment must remain for about 12 hours at room temperature before switching on.
All complaints caused by running of the equipment too soon will be denied.

You must completely remove the screw/screws from the bottom of the station if the compressor is the source of air supply. These screws are marked in red (1 or 3 screws depending on model).

Note

Heating elements (heaters) and tips are not subject to warranty, you should purchase new ones.

Our range of accessories for soldering:

Voltage to	220 V AC
Voltage from	240 V AC
Voltage nominal	230 V AC
Nominal power	1270 W
Temperature	200 - 480 °C
Solder - Fan	yes
Solder - real temperature reading	yes
Solder - Hotair	yes
Solder - Type A/C	digital
Package width	37 cm
Package height	36 cm
Package depth	19 cm
Package weight	5.5 kg