List of products by brand OEM - Strona 150
Resistor SMD 1206 8,2kΩ - 5000szt.
Set of 5000 resistors with a resistance of 8.2 kΩ. The items are in the case SMD1206.- EOL
- EOL
- EOL
USB Car Charger - DPM CLT721 5V/2,1A 2xUSB
Power supply for a car socket with two USB sockets. Output voltage is 5 V, maximum current is 2.1 A.- EOL
Cable A - B USB Typ C 1m - white
USB 2.0 cable, type A - USB 2.0, type-C to transfer data at USB 2.0 standard with the speed of up to 480 MB/sec. Cable length is 1m.- EOL
USB programmer / debugger for C8051F microcontrollers
Device works as a programmer and a debugger for all C8051Fxxx modules. Voltage supply 5 V through the USB port on your computer.- EOL
- EOL
- EOL
Shade for Ledprofile B1/C1 - transparent - 2m
Press-in diffuser designed for B1/C1 profiles. Dimensions are 14 x 5 mm. The length of the shade is 2 m.- EOL
- EOL
Plug with a hole for Ledprofile A1 - transparent
Hole cap designed for profiles A1 for LED strip.- EOL
Antena WiFi 5dB męski RP-SMA - 17cm
2 dB WiFi antenna with U.FL connector, operating in 2.4 GHz. The length is 87 mm and the diameter is 8 mm. The length of the cable is 5 cm.- EOL
Plug with a hole for Ledprofile B1 - white
Hole cap designed for B1 profiles for LED strip.- EOL
Plug with a hole for Ledprofile C1, left - silver
Hole cap - left - for C1 profiles for LED strip.- EOL
Plug with a hole for Ledprofile C1, right - silver
Hole cap - right - for C1 profiles for LED strip.- EOL
- EOL
- EOL
Eight-segment display x2 - 14mm RGB - SparkFun COM-13999
Dual display 8-segment of two digits along with points and some characters. In each segment you can set one of the RGB colors.- EOL
- EOL
DPDT relays module 4 channels - 1A / 125VAC - 5V contacts
The module is equipped with HK19F DPDT relay which has two pairs of the switched contacts. The system allows you to control actuators using the microcontroller ports or any...- EOL
DPDT relay module 2 channels - 1A / 125VAC contacts - 12V coil
The module is equipped with HK19F DPDT relay which has two pairs of the switched contacts. The system allows you to control actuators using the microcontroller ports or any...- EOL
- EOL
Case for PIR motion detector - 3D print yellow
Yellow case for popular PIR motion sensor with mounting holes with a diameter of 3 mm. It is made using the technology of 3D printing.- EOL
DETC02 - carbon monoxide (carbonate) sensor
Sensor that detects the concentration of carbon monoxide (Chad - CO) in air. It is powered by 230 V or batteries. Used to warn against this dangerous gas by means of an...- EOL