- New
- Sale
- Sale
- Reduced price
- Sale
List of products by brand OEM - Strona 52
Loading...
Card Reader AK242A - microSD memory card reader
Universal reader of microSD cards with the USB 2.0 interface. It allows for data transfer from card to computer. It supports all microSD cards up to 32 GB. The device is sent...
Index: KAP-05848
Index: KAP-05848
- Discontinued product
Jack 3,5mm stereo female jack - JY039-5P
Jack female 3.5 mm stereo socket. It has pins for the through-hole soldering (THT) on the PCB.
Index: KAB-02734
Index: KAB-02734
DC socket 5,5 x 2,1mm with 20AWG wire - 1m
DC plug φ 5.5 x 2.1 mm (for power supply unit) with a 2-core black wire, 1 m long with the insulation removed at the end. Very easy to install. It can be used to power...
Index: DNG-15150
Index: DNG-15150
Bluetooth 4.0 BLE module - HM-10 / AT-09 - MLT-BT05 - 3.3V / 5V
Bluetooth v4.0 module. It works with voltage from 3.6 V to 6 V, it communicates over a serial UART interface (RX, TX pins), it supports the AT command. Maximum transmitter...
Index: MOD-09515
Index: MOD-09515
- Reduced price
- SPECIAL OFFERS
A set of two high-current XT60 type connectors. Connectors are used, i.a. for connections with li-pol packs.
Index: KAB-03300
Index: KAB-03300
- Discontinued product
The jumper is designed for goldpin connectors - pitch of 2.54 mm. Price is for 10 pieces.
Index: KAB-09755
Index: KAB-09755
Raspberry Pi camera tape - 30cm 15-core 1mm raster
Tape with a length of 30 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-01909
Index: RPI-01909
Phototransistor 940nm - L-53P3C
Phototransistor in the case of 5 mm. Maximum sensitivity for the wave with the length of 940 nm. The reading angle is 30 °. Transparent lens.
Index: UCC-00271
Index: UCC-00271
Nylon Distance Bolts 10mm - 10pcs.
Plastic distance bolts, length 10 mm, outer diameter of 5 mm and an internal 3 mm. Price for 10 pieces. Elements of this type are based on a screw, allow you to keep the same...
Index: MTN-00046
Index: MTN-00046
RTC module DS3231 I2C - real time clock
Module with real time clock, allows you to read the time in hours, minutes, and seconds, and to read the date: month, day, year. The device was based on the DS3231 system,...
Index: MOD-03790
Index: MOD-03790
Crocodile cables - 50cm, colorful 10pcs
Set of 10 colorful wires ended, on both sides, with connectors of crocodile type. Length of one element is 50 cm.
Index: KAB-03783
Index: KAB-03783
Slide switch MSS-2245 2-position - straight
Slide switch, straight printable with dimensions of 9 x 3.5 x 3.5 mm. 2.54 mm lead spacing.
Index: UCC-04839
Index: UCC-04839
Pair of connectors used in batteries. They have a casing made of materials resistant to high temperatures, and metal connectors ensure correct operation at currents up to 65...
Index: GIM-14995
Index: GIM-14995
- Discontinued product
3pin socket adapter for servo with alligator clips
The cable enables connection of a standard servo to a board, e.g. micro:bit without soldering . It is a simple type of connector that allows you to connect the signal to...
Index: DNG-17687
Index: DNG-17687
Sensor Shield V5.0 - Shield for Arduino
Arduino extension kit. It allows you to connect various devices like sensors, servos, buttons, potentiometers, relays etc. It has pins from Arduino board along with 5V and...
Index: MOD-03725
Index: MOD-03725
- Discontinued product
- SPECIAL OFFERS
TEA5767 I2C FM stereo radio tuner module
A module that allows you to build a fully functional radio. It is controlled by the I2C bus. It is powered with the voltage from 2.5 V to 5.5 V.
Index: UCC-06639
Index: UCC-06639
IR pilot with 21 keys. It allows you to create a wireless connection with any microcontroller with an IR receiver.
Index: MOD-08232
Index: MOD-08232
- Discontinued product
A set of 200 resistors with the 1 W power. Elements are in the through hole THT case.
Index: PAS-08278
Index: PAS-08278
ON-OFF switch monostable - flat - blue - 12V
Flat monostable switch with the blue backlight .
Index: DNG-10942
Index: DNG-10942
Optical Limit Sensor Endstop Reprap 3D Ramps 1.4
Optical, slit end sensor dedicated to RapRap 3D printers. The module has three outputs and connects to the Ramps 1.4 controller via the included cable.
Index: MOD-02659
Index: MOD-02659
Stepper Motor JK42HS48-2504 200 steps 3,1V/2,5A/0,47Nm
Bipolar stepper motor , four-wire. Has a resolution of 200 steps per revolution (1.8 degrees). Powered by 3.1 V, it draws 2500 mA per coil. Torque is 4.8 kg*cm (0.47 Nm)....
Index: MOT-03615
Index: MOT-03615
USB-UART converter D-Sun PL2303
Converter which provides communication between the serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers....
Index: MOD-04146
Index: MOD-04146
DSM501A - PM2.5 dust sensor - 5V PWM
Sensor of dust allows you to monitor the purity of the air. It is equipped with a sensor that could detect particles with a diameter above 1 µm, for example, cigarette smoke....
Index: MOD-07560
Index: MOD-07560
Radio receiver for controlling LED strips
The device is designed for turning on / off and dimming LED lighting in the form of tapes and strips with a remote control. The switch may be dual-channel (3 a per channel) or...
Index: MOD-09635
Index: MOD-09635
- Discontinued product