- New
- Reduced price
- Sale
Air quality / dust sensor PM1.0 / PM2.5 / PM10 - PMS3003 - 5 V UART
Index: DNG-13442
- Reduced price
- Sale
- Sale
- Sale
List of products by brand OEM - Strona 51
Loading...
Big Push Button 10cm - white (eko2 version)
Big button with an outer diameter equal to 10 cm. Eko2 buttons can rattle when shaking but they perfectly perform their function.
Index: SWT-03655
Index: SWT-03655
RFID identification card - 13.56MHz - 10pcs.
The RFID identifier in the form of a plastic card with the size of a payment card. Each chip has a unique 32-bit code. The device works at a small distance from the reader,...
Index: MOD-07053
Index: MOD-07053
Eight-segment display x1 - 14mm green - common cathode
A single 8-segment display allows the display of a digit along with a period and some letters.
Index: LCD-07288
Index: LCD-07288
Extension slot for memory cards microSD - 65cm
Extension slot for memory cards microSD, e.g. for Raspberry Pi with a tape with a length of 65 cm.
Index: DNG-12290
Index: DNG-12290
Slide switch ESP1010 - straight
Slide switch, straight to print with the size of 10 x 2.5 x 6.5 mm. Pins pitch: 2.54 mm.
Index: UCC-00255
Index: UCC-00255
BLS connector - 5x1 socket - 5pcs.
Socket for BLS type cable, 2.54 mm pitch. The set includes 5 5x1 sockets.
Index: KAB-04545
Index: KAB-04545
Cell holder for 4x 18650 battery without wires
Plastic basket in black , accommodates up to four 18650 type cells and has no leads. The cells are easy to assemble and disassemble thanks to the use of spring-loaded...
Index: DNG-16520
Index: DNG-16520
Buzzer without generator 5V 1mm - THT
Passive buzzer (does not have a generator) with a diameter of 12 mm , designed for THT threaded mounting. Powered by 5 V .
Index: DNG-18290
Index: DNG-18290
5 W water pump. Powered by 3 V to 12 V DC. Maximum water flow at 5V is 1,2 l/min. Motor diameter is 27mm, total length is 60mm.
Index: GRL-14164
Index: GRL-14164
- Discontinued product
Cell holder for 2x 18650 battery without wires
Black basket made of plastic, designed for two 18650 type batteries . It has no leads. Enables trouble-free drawing of electricity from the cells. Assembly and disassembly...
Index: DNG-16517
Index: DNG-16517
Jack 3,5mm stereo female jack - JY039-5P
Jack female 3.5 mm stereo socket. It has pins for the through-hole soldering (THT) on the PCB.
Index: KAB-02734
Index: KAB-02734
Copper heatsink set for Raspberry Pi 4/3/2/B+/Zero - 8pieces
The set includes two copper heatsinks, which can cool the minicomputer Raspberry Pi 3 B, 2 B, B+ and Zero. They are suitable for chips located on the board and emit the...
Index: DNG-10048
Index: DNG-10048
Index: AKC-00486
Slide switch MSS-2245 2-position - straight
Slide switch, straight printable with dimensions of 9 x 3.5 x 3.5 mm. 2.54 mm lead spacing.
Index: UCC-04839
Index: UCC-04839
PN532 NFC/RFID 13,56MHz I2C/SPI module + card and a keychain
Board allows you to read and save data from RFID devices at 13.56 MHz frequencies. It also works with the NFC protocol. The module is based on PN532 system, it is powered with...
Index: MOD-08240
Index: MOD-08240
Big Push Button 10cm - red (eko2 version)
Big button with an outer diameter equal to 10 cm. Eko2 buttons can rattle when shaking but they perfectly perform their function.
Index: SWT-03656
Index: SWT-03656
DIN15W24 power supply for DIN rail - 24V/0,63A/15W
DIN rail mounted power supply unit. Input voltage from 200 V to 240 V AC. Output voltage is 24 V. Output current up to 0.63 A.
Index: ZAS-06389
Index: ZAS-06389
The device allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm.
Index: MOD-08071
Index: MOD-08071
IR pilot with 21 keys. It allows you to create a wireless connection with any microcontroller with an IR receiver.
Index: MOD-08232
Index: MOD-08232
- Discontinued product
Wireless keyboard + mouse Smart H20 - black
Compact, wireless keyboard with touchpad and backlight for remote computer control. The device works with the Raspberry Pi. The set also includes the USB adaptor and charging...
Index: DNG-12293
Index: DNG-12293
Power supply MDIN100W24 for DIN rail - 24V / 4A / 100W
Switch-over power supply designed for mounting on a DIN rail. The input voltage of the power supply is from 100 V to 240 V AC. The output voltage is 24 V. The output current is...
Index: WAK-15796
Index: WAK-15796
Big Push Button 10cm - yellow (eko2 version)
Big button with an outer diameter equal to 10 cm. Eko2 buttons can rattle when shaking but they perfectly perform their function.
Index: SWT-03654
Index: SWT-03654
Set of heat sinks for Raspberry Pi - with heat transfer tape - black - 4pcs.
The kit contains 4 pieces of black heatsinks that are 14 x 14 mm , 14 x 10 mm, 9 x 9 mm, 7 x 7 mm. There is double sided, thermally conductive tape on the bottom of...
Index: DNG-18746
Index: DNG-18746
SM-DU cable - for auto-leveling sensor - 2m
2 m long cable for connecting the Antclabs BLTouch auto-leveling sensor, used in 3D printers. The product ends with a plug with a pitch of 1 mm, which can be easily connected...
Index: DNG-21527
Index: DNG-21527