Description: Spectrum PLA Premium 1,75 mm 1 kg Filament - Wizard Indigo
PLA Premium 3D printer cartridge from Spectrum. It was produced on the basis of polylactide and is characterized by full biodegradability. It is designed for 3D printers, which work in FDM / FFF technology, also without a closed work chamber. Filament will be useful in various educational projects and prototyping. 1 kg of material is pre-wound on a transparent spool. On the spool there is information about the type of material, diameter and recommended printing temperature. The cartridge is vacuum packed with moisture absorber.
In our offer of filaments you will also find other materials and colors.
Suggested parameters of printing with the use of felt
| Printing temperature | From 185°C to 215°C |
| Heated table | From 0°C to 45°C |
| Printing speed | From 40 to 150 mm/s |
| Due to differences in printer design, the above data should be considered as a guideline and the corresponding values should be determined experimentally. |
PLA material properties
- Produced from fully biodegradable materials
- Good mechanical properties (high hardness and tensile strength)
- Easy to use
- The surface of the final printouts is very aesthetic
- The material is suitable for creating high resolution parts
- Printed objects are very rigid
- Low melting point
- Printouts do not shrink after cooling
- Heat distortion temperature is 55°C
Spectrum PLA Premium 1,75 mm 1 kg felt - Wizard Indigo.
Technical specification and physical properties of the filament
| Parameter | Range |
|---|---|
| Filament diameter | 1,75 mm |
| Dimensional tolerance of the filament | +/- 0.05 mm |
| Color | Indigo |
| Printing temperature | From 185°C to 215°C |
| Heat distortion temperature | 55°C |
| Spool - material | PLA Premium |
| Moisture absorber | Yes |
| Vacuum packaging | Yes |
| Density | 1.24 g/cm3 |
| Tensile strength | 60 MPa |
| Modulus of elasticity | 3.5 MPa |
| Spool dimensions |
|
| Net weight | 1 kg |
Useful links |
