Product description: PCIe-TO-SATA-4P - 4-channel PCIe - SATA 3.0 expander - Waveshare 22247
Waveshare converter with built-in Xiangshuo ASMedia ASM1064 chip . Intended for use with the Raspberry Pi Compute Module CM4 . The expander allows you to extend the functionality of the module through one PCle Gen3 port and four SATA 3.0 connectors . The data transfer rate for each channel is up to 6 Gb/s. The module can be powered from the PCIe 12V interface or via an external 5V/12V power connector.
PCIe-TO-SATA-4P - 4-channel PCIe - SATA 3.0 expander - Waveshare 22247.
4-channel PCIe - SATA 3.0 expander manufactured by Waveshare.
Special features of the expander
- Compatible with Raspberry Pi Compute Module 4
- Supports 1 lane PCI Express
- Four power saving modes L0s / L1 / L23 / L3
- Supports deep power saving mode in sub-state L1
- Supports SRIS, AER, LTR
- Supports SATA LED
- Supports NCQ and AHCI SPEC 1.4
- Equipped with four SATA Gen3 (6Gb/s) ports
- Supports switching based on port multiplier commands
- Supports SATA Partial/Dormancy power management
- The module does not support the M.2 interface
- Equipped with Xiangshuo ASMedia ASM1064 chip
- Powered by 12V via PCIe or 5V or 12V via external DC connection
Technical specification PCIe-TO-SATA-4P
- Module type: converter
- Conversion type: PCIe - SATA 3.0
- Number of channels: 4
- Transmission speed: 6Gbps
- Built-in controller: ASM1064 controller
- SRIS, AER, LTR support
- Board dimensions: 82 x 39 mm
There are 4 SATA 3.0 connectors on the board.
Components included in the set.
Kit contents
- PCIe-TO-SATA-4P - 4-channel PCIe expander - SATA 3.0 - 1 piece
- SATA connection cable - 1 piece
- A set of mounting elements
- screws - 2 pieces
- spacer sleeves - 2 pieces
Also check the manufacturer 's user guide !
Useful links |
