Description
Resistive, touch screen5" for the Raspberry Pi with a resolution of 800 x 480 px. Works with any version of the Rasbperry Pi via HDMI connector and microUSB - adequate cables are included in the package. The device also works with minicomputers:Banana PiandBeagle Bone Black.
The device communicates via the HDMI cable (picture) and microUSB slot (touch). Both wires are included in the package.
Connecting to the Raspberry Pi
In order to run screen, you must connect the device to a Raspberry Pi via the supplied wires: HDMI and microUSB. HDMI connector transmits the image, a USB port receives data of the touch interface.
Example of connecting the screen to the Raspberry Pi.
Software
The screen works with the latest operating system Raspbian without the need to install drivers. However, in order that the screen displays the picture properly, you should change the resolution in the configuration file. To do this, open the file config.txt with command:
sudo nano /boot/config.txt
and then, at the end, add the following statements:
max_usb_current=1hdmi_group=2hdmi_mode=87hdmi_cvt 800 480 60 6 0 0 0hdmi_drive=1
After saving the file and reboot the raspberry image, the touch function should work fine.
|
A detailed description can be found onthe website of the manufacturer. |
Specification
- Screen type: resistive, touch
- Diagonal: 5 "
- Resolution: 800 x 480 px
- Works with:
- Rasbperry Pi in version 4B, 3B+, 3B, 2B and B+ Zero: works with the latest operating system without the need of additional configuration
- Beagle Bone Black
- Banana Pi/ Banana Pro
- Windows 7 / 8 / 8.1 / 10 without the need to install drivers
- Also works with all HDMI devices (touch function not available then)
- 4 mounting holes (screws included in the package)
- Version: Rev. 2.1
- Screen dimensions: 121 x 76 mm
The outer dimensions of the screen.
Set includes
- Resistive touch 5" screen
- HDMI cable
- HDMI - microHDMI adapter
- Mounting screws
- USB cable - microUSB for touch interface
Case
In our offer, you will also finda special case which allows to set the screen at an angle of 45° or 60°. The set along with housing has also screws for mounting the Raspberry Pi behind the screen.
In our offer you will find also
- Special cases
- Set 5" screen witha transparent case
- Set 5" screen with black-and-white case
Useful links |
