- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
Touch screen, resistive 5" for the Raspberry Pi with a resolution of 800 x 480 px. It works withRaspberry Pi in versions 3, 2 and B+with HDMI connector and microUSB - cables are included in the package. The device also works with minicomputers:Banana PiandBeagle Bone Black. A specialblack and white case for the Raspberry and the screen.
The device communicates via HDMI cable (picture) and microUSB (touch). Both wires are included in the package.
Connect to the Raspberry Pi
In order to run the screen, you must connect the device to a Raspberry Pi via the supplied wire: HDMI and microUSB. HDMI transmits the image of the USB port, receives data of the touch interface.
In the kit you will also find a special case, which will allow you to install the Raspberry with the screen and set the screen at an angle of 45° or 60°.
Software
The manufacturer has prepared the operating system with the installed drivers. The system should be unpacked using an appropriate program such as WinZip and uploaded to the memory card usingWin32 Disk Imager.
Screenshot of the programWin32 Disk Imager, when you select a control, simply click on the Write button and wait until the installation process is completed.
|
Detailed description of the connection and installation of drivers without changing the system Raspberry Pi, Banana Pi and Beagle Bone Black you can be found inour guideor onthe manufacturer's website. |
Specification
- Screen type: resistive touch
- Diagonal: 5 "
- Resolution: 800 x 480 px
- Screen version: Rev. 1.1
- Works with:
- Raspberry Pi in versions B 3, B 2 and B+ (works directly withcontrolfrom manufacturer)
- Beagle Bone Black
- Banana Pi/ Banana Pro
- Also works with all HDMI devices (touch function not available)
- 4 mounting holes (screws included in the package)
- Screen dimensions: 121 x 76 mm
- External frame dimensions: 133 x 95 mm
- Case in black and white
- The possibility of installing at an angle of 45 ° or 60 °
- Material: acrylic
Case assembly
The case allows you to install the screen along with the minicomputer Raspberry Pi in the back.
An example of a mounting the screen in the case.
Set includes
- 5" touchscreen and resistive display
- HDMI cable
- Screws for mounting
- USB cable - microUSB for touch interface
- Case for Raspberry and screen - black-white
Useful links |
