Product description: ArduCam HM0360 VGA SPI camera for Raspberry Pi Pico - ArduCam B0319
The HM0360 camera manufactured by ArduCam is a budget and low cost version of the camera built specifically for the Raspberry Pi Pico and all available development boards with the RP2040 microcontroller. The HM0360 camera uses Himax Imaging's advanced 3.6 µ LED to achieve excellent performance and image sharpness even in low light. Moreover, it consumes only 140 µA in QVGA 2 fps and about 7 mA in VGA 60 fps readout mode. The module also has a built-in oscillator and RTC to reduce the latency of transmitted images. It has a sensor that provides several monitoring options with a programmable interrupt so that the host processor can be put into a low power standby state until the sensor is notified of movement.
HM0360 VGA SPI camera kit contents from ArduCam.
ArduCam HM0360 VGA SPI camera - for Raspberry Pi Pico - ArduCam B0319.
Features of ArduCam HM0360
- Ultra Low Power, high sensitivity, low noise VGA sensor
- Draws from 7.8 mA VGA 60 fps to 240 µA in standby mode
- Automatic camera wake-up and sleep with programmable interruption - for reduced performance
- Built-in high precision oscillator, LDO, auto exposure/gain, ambient light sensor, and zone detection
- External frame synchronization and stereo camera support
- Flexible binning
- 1-track MIPI CSI2 and 8-bit parallel / serial data format supporting 1-bit, 4-bit and 8-bit protocol
- I2C 2-wire serial interface with serial operation support for fast register access
- High CRA for low profile module design
Kit contents
- ArduCam HM0360 VGA SPI camera - for Raspberry Pi Pico - ArduCam B0319
- Female to female connecting cables - 8 pieces
Technical specification of the camera from ArduCam
- Sensor: HM0360
- Active resolution: 656 x 496 px
- Pixel size: 3.6 x 3.6 µm
- Pixel technology: BSI
- Optical format: 1/6'' (diagonal 2.88 mm)
- Color Filter Chart: Bayer, monochrome
- Frame rate at 24 MHz: QQVGA 1 fps to VGA 60 fps
- Readout modes: Full (VGA), Bin2 (Mono) / Sub2, Bin4 (Mono) / Sub4, Fast ROI
- S/N Ratio: 45.5 dB maximum
- Dynamic Range (1x): 85 dB
- Sensitivity: 5.5 V / Lux-sec @ 530 nm, 15 V / (uW-cm-2 sec) @ 850 nm
- CRA: 35.74º maximum
- Supply voltage:
- analog: 2,8 V
- digital: 1.2 V (optional 1.8 V LDO)
- I/O: 1.8 V to 3.0 V
- Reference Clock (EXTCLK): 6 MHz to 24 MHz
- Built-in internal oscillator
- Serial interface: I2C
- Module dimensions with camera: 33.12 x 23.05 mm
- Mounting hole spacing: 28.56 x 20.74 mm
ArduCam HM0360 VGA SPI camera for Raspberry Pi Pico - rear view.
Useful links |
