Product description: ArduCam HM01B0 QVGA SPI camera for Raspberry Pi Pico - ArduCam B0315
HM01B0cameraproduced by ArduCam is a version of camera designed specifically for Raspberry Pi Pico and all available development boards with RP2040 microcontroller. The HM01B0 camera features very low power consumption, resolution up to QVGA, 1-bit video data interface and line synchronization. It is an ideal camera for building machine vision projects and Always on Service applications using energy efficient microcontrollers.
HM01B0 QVGA SPI camera kit contents from ArduCam.
ArduCam HM01B0 QVGA SPI camera - for Raspberry Pi Pico - ArduCam B0315.
Features of ArduCam HM01B0
- Equipped with ultra-low power image sensor designed for always-on video devices and applications
- High sensitivity and BrightSense pixel technology
- Active pixel resolution of 324 x 324 px with support for QVGA, vertical tilting and horizontal mirroring
- Resolution <1.1 mw="" qqvga="" at="" 30="" fps="" and="" 2="" mw="" qvga="" at="" 30="" fps="" li="">
- Automatic exposure and gain control loop with 50/60 Hz flicker avoidance support
- Flexible 1-bit, 4-bit and 8-bit video data interface with video frame and line synchronization
- Motion detection circuit with programmable ROI and detection threshold with digital output as interrupt
- Built-in oscillator
- 2-wire I2C serial interface
- CSP and Bare Die sensor package option
- High CRA for low profile module design
Kit contents
- ArduCam HM01B0 QVGA SPI camera for Raspberry Pi Pico - ArduCam B0315
- Female to female connecting cables - 8 pieces
Technical specifications of ArduCam camera
- Sensor: HM01B0
- Active resolution: 320 x 320 px
- Pixel size: 3.6 x 3.6 µm
- Pixel technology: BrightSense
- Full picture area: 1152 x 1152 µm
- Optical format: 1/11'' (diagonal 1.63 mm)
- Colour filter array: Bayer, monochrome
- Scanning mode: progressive
- Shutter type: electronic shutter
- Frame rate: 51 fps @ 320 x 320, 60 fps @ 320 x 240 (QVGA)
- CRA: 30º maximum
- Supply voltage:
- Analog: 2,8 V
- digital: 1.5 V (internal LDO: 1.5 V to 2.8 V)
- I/O: 1.5 V to 2.8 V
- Reference Clock (EXTCLK): 3 MHz to 50 MHz
- Built-in internal oscillator
- Serial interface: I2C
- Video data interface: 1b, 4b, with frame / SYNC line (8b is not supported)
ArduCam HM01B0 VGA SPI camera - for Raspberry Pi Pico - rear view.
Useful links |
