- New
- New
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 24
Loading...
Connecting cables female-male 20cm red - 10pcs
Set of 10 high quality connecting cables with a length of 20 cm in red.
Index: KAB-01400
Index: KAB-01400
4-pin male connector housing 2,5mm - 5pcs.
4-pin male connector housing - 2.50 mm raster. In the set there are 5 pieces.
Index: KAB-06310
Index: KAB-06310
Strip LED SMD2835 IP65 4,8W, 60 LED/m, 8mm, natural white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 4.8 W/m, density of 60 diodes per meter. The color of the light is natural white. Protection...
Index: LED-07093
Index: LED-07093
Potentiometer knob gray - 4/12mm - 5 pcs.
Knob for rotation potentiometer on axis of 4 mm. The height is 17.5 mm and the outer diameter is 12 mm. The product is sold in sets of 5.
Index: MOD-07933
Index: MOD-07933
Lanberg LAN Patch Cord 5e - 0,25m - grey
Cable - twisted pair from the 5e Ethernet category with installed RJ45 plugs with the length of 25 cm.
Index: KAB-08338
Index: KAB-08338
ON-OFF Switch PBS 11A, 250V/1A - black
Bistable switch with a round attachment with the contacts' loading capacity of 1 A for 250 V or 3 A for 125 V.
Index: UCC-08384
Index: UCC-08384
50 bright LEDs in red color united in one chain. Each pixel has a diameter of 5 mm, protected by a silicone case, IP65.
Index: LED-09705
Index: LED-09705
Peltier Cell TEC1-12715 12V / 12A
The cooling cell applied, for example, in portable refrigerators. It is supplied with the voltage up to 12 V, it consumes up to 11. 8 A of current. Board sizes - 40 x 40 x 3.3...
Index: DNG-10022
Index: DNG-10022
NTC 10kΩ thermistor with 2m cable
Thermistor of NTC type with a resistance of 10 kΩ. The connecting cable has a length of 2 meters.
Index: DNG-10931
Index: DNG-10931
Printer nozzle 0,3mm MK8 - filament 1,75mm - copper
Nozzle with a hole of 0.3 mm is suitable for most available printheads in printers 3D. Supports filaments with a diameter of 1.75 mm. It has M6 threads.
Index: DNG-14127
Index: DNG-14127
Rotary potentiometer 501Ohm linear 1/5W B0.5K/B501- 5pcs.
The B0.5K/B501 carbon-coated linear rotary potentiometer has three pin-outs that fit on contact boards. Connected to the microcontroller's analog-to-digital converter (e.g....
Index: DNG-19633
Index: DNG-19633
Set goldpin raster 2.54mm justPi - mini
Goldpin strips allow you to connect with each other systems, modules, sensors. You can also use cables to make connections. The slats in the mini set from justPi are...
Index: JUS-19952
Index: JUS-19952
Quartz resonator 32,768kHz - watch
The resonator quartz of 32.768 kHz in the through hole case in the form of a tube with the size of 2 x 6 mm. Items are sold in sets of 10 pieces.
Index: PAS-00216
Index: PAS-00216
USB Type A plug - plastic - for cable
USB plug type A for soldering the cable in a plastic housing.
Index: KAB-00848
Index: KAB-00848
Raspberry Pi camera ribbon wire - 45cm 15 wires 1mm raster
Tape with a length of 45.7 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-02442
Index: RPI-02442
Grove - Base Shield v2 - Shield for Arduino
Shield for Arduino, which extends the capabilities I/O pins. Designed for modules and sensors from the Grove series. It has 4-pin connectors, and all the outputs known from...
Index: SEE-04440
Index: SEE-04440
Arcade Push Button 3,3cm black case - white with backlight
Button with an outer diameter of 33 mm and height of 60 mm with integrated LED illuminating the dome in the white color. To the button attached is a simple limit switch.
Index: SWT-05284
Index: SWT-05284
Eight-segment display - 14mm red - common cathode
Single 8-segment display of digits with points and some characters.
Index: LCD-06448
Index: LCD-06448
Encoder with button - 24 impulse 12mm - EC12 vertical - 5pcs.
Knob in the form of an encoder with a button that allows you to create a simple user interface. The module sends the digital signal to two pins depending on the direction of...
Index: MOD-06909
Index: MOD-06909
Logic system CD4069UBE - 6x inverter - 2pcs
Logic system 6 x inverter with working voltage from 3 V to 18 V, in the DIP 14 case. Items are sold in sets of 2 pieces.
Index: UCC-07284
Index: UCC-07284
Adapter to connect the cable with the SMA female end with the SMA female slot.
Index: KAB-08083
Index: KAB-08083
Index: LED-08186
LED indicator 230V AC - 12mm - white
LED light, operating voltage 230 V AC. It has a diameter of 12 mm.
Index: LED-08998
Index: LED-08998
DFRobot Gravity - analog sensor of TDS, purity of water for Arduino
Analog TDS sensor compatible with Arduino, it is used for measuring the hardness and the purity of water. It can be used to test the quality of water in households, hydroponic...
Index: DFR-10830
Index: DFR-10830