- New
Pakiet filamentów Devil Design - czarno-biały PLA + PETG - 10szt.
Index: DEV-27744
- New
- Reduced price
- Pack
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
LCD display 2x16 characters RGB negative + connectors - Adafruit 399
Index: ADA-02622
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 45
Loading...
Electric cube 2pin 32A/400V - orange - 5pcs.
The 2-pin electric cube allows you to connect the wires with a voltage of 400 V with the flow of current up to 32 A in a simple way, without the need of using the tools.
Index: KAB-06900
Index: KAB-06900
Encoder with button - 20 impulse 12mm - EC11 vertical - 5pcs.
Knob in the form of an encoder with a button that allows you to create a simple user interface. The module sends the digital signal to two pins depending on the direction of...
Index: MOD-06903
Index: MOD-06903
Plug DC 5,5/2,5mm with terminal connector - 5pcs
DC φ5.5 x 2.5 mm plug (for power supply unit) with a detachable connector that allows you to mount the cable with a screwdriver. Items are sold in sets of 5 pieces.
Index: KAB-07208
Index: KAB-07208
Wall socket 2xRJ45 shielded - white
Socket used in high-speed IT networks, it is equipped with two shielded RJ45 ports, category 5e. Surface installation.
Index: ZAS-07477
Index: ZAS-07477
Female socket 1x9pin raster 2.54m - vertical long for Arduino - 5pcs.
9-pin female strap that allows you to extend the connectors of the Arduino. Pins pitch of 2.54 mm.
Index: UCC-08079
Index: UCC-08079
Set of 200 resistors of 1 Watt power. Elements in a THT through-hole housing.
Index: PAS-08283
Index: PAS-08283
ON-OFF Switch PBS 11A, 250V/1A - red
Bistable switch with a round attachment with the contacts' loading capacity of 1 A for 250 V or 3 A for 125 V.
Index: UCC-08385
Index: UCC-08385
Switch ON-OFF KN3(C)-101 250V/6A
Lever print switch equipped with 2 contacts, load capacity 6 A / 250 V or 10 A / 125 V. Leads raster is 25 mm, total height 45 mm.
Index: UCC-08392
Index: UCC-08392
Solenoid Valve 12V - 1/2'' 0,02-0,8MPa
The device supports the control of fluid flow using a computer or microcontroller. The valve is powered with the voltage of 12 V.
Index: MOD-09447
Index: MOD-09447
Sensor of the rotation, pulser, rotation encoder - DFRobot EC11
A knob in the form of an encoder together with a button , allows you to create a simple user interface. The module has three signals: A and B are the encoder outputs, while...
Index: DFR-09533
Index: DFR-09533
DC 2,1/5,5mm socket with crocodile clips - 44mm
The power cable ended on the one side with the DC 2.1 / 5.5 mm power socket, on the other, with the popular crocodiles. It p rovides the leading-out of the voltage from the...
Index: KAB-09702
Index: KAB-09702
Muscle Wire metal alloy with shape memory - 0,127mm - SparkFun COM-11899
Muscle Wire is a wire made of an alloy of nickel and titanium with the shape memory. It can be bent and model when it is in the martensitic form, it will return to the original...
Index: SPF-10085
Index: SPF-10085
Qwiic JST Connector - SMD 4-pin - SparkFun PRT-14417
JST 4-pin SMD connector for Qwiic boards using the I2C interface. Pins pitch is 1 mm.
Index: SPF-10106
Index: SPF-10106
Barrier strip for PCBs, 4-pin, 8.5mm raster - 5pcs.
Barrier strip for PCB, 4-pin with 8,5 mm pitch, maximum voltage for contacts is 300 V and current is 20 A.
Index: AKS-10956
Index: AKS-10956
Grove - Module 4x 7-segment display - digital interface
Grove series four-character 7-segment display module. It allows displaying four digits along with colon and some letters in red. Based on TM1637 chip, it is compatible with...
Index: SEE-11293
Index: SEE-11293
Grove RS-485 module allows to connect Arduino to RS-485 bus. Easy to use plug and play device. The module features high stability and supports 500 kB/s error free...
Index: SEE-14130
Index: SEE-14130
Cytron SmartDriveDuo MDDS30 - two-channel DC motor driver - 7V-35V/30A
Two-channel DC motor controller by Cytron equipped with SmartDrive function supporting 4 different communication interfaces. The controller works with motors supplied with...
Index: CTN-14814
Index: CTN-14814
A01NYUB ultrasonic distance sensor 28-750cm - waterproof - DFRobot SEN0313
An ultrasonic sensor that measures by calculating the time between sending and receiving a pulse. The sensor can measure distances from 28 cm to 750 cm . It communicates...
Index: DFR-15716
Index: DFR-15716
Kanthal A1 resistance wire 0,64mm 4,9Ω/m - 9,1m
Kanthal A1 is a type of resistance wire made of an alloy of iron, chromium and aluminium. The wire is 9.1 m long and has a diameter of 0.64 mm. Its resistance value is 4.9 Ω...
Index: AKS-16669
Index: AKS-16669
JST SH 6 PIN 75cm female cable - Pololu 4764
The JST SH female cable, has 6 pins in 1 mm spacing . The cable is 28 AWG thick and 75 cm long. It allows to connect Polol's magnetic encoders.
Index: PLL-17159
Index: PLL-17159
Digital temperature and humidity sensor DHT11 - Waveshare 9535
DTH11 digital temperature and humidity sensor module from Waveshare. It enables temperature measurement from 0°C to 50°C with measurement accuracy of ± 2°C and ambient...
Index: WSR-17383
Index: WSR-17383
Panel thermometer with LCD display from -50 to 110 degrees Celsius and measuring probe - 10m
Electronic thermometer powered by two lozenge type batteries (LR44). The device has a 10 meter long cable ended with a probe for temperature measurement. Temperature...
Index: BNT-19570
Index: BNT-19570
JustPi THT CF carbon resistor 1/4W 300Ω - 30pcs.
The set consists of 30 resistors. The electronic elements are designed for THT through-hole mounting. The resistance is 300 Ω and the tolerance is equal to 5%. The resistors...
Index: JUS-20006
Index: JUS-20006
MCP23017 module - GPIO pin expander - 16-channel I2C - STEMMA QT / Qwiic - Adafruit 5346
Lead expander from Adafruit equipped with the MCP23017 chip. It allows you to extend the number of pins of modules such as Arduino or Raspberry Pi by an additional 16 I/O...
Index: ADA-21037
Index: ADA-21037