Pakiet filamentów Devil Design - czarno-biały PLA + PETG - 10szt.
Index: DEV-27744
- New
- Reduced price
- Pack
- Sale
- New
- New
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 55
Loading...
Kanthal A1 resistance wire 0.16mm 56Ω/m - 30,5m
Resistance wire type Kanthal A1 with a diameter of 0.16 mm and a resistance of 56 Ω / m. The wire is wound on a reel and has a length of 30.5 m .
Index: AKS-16659
Index: AKS-16659
Kanthal A1 resistance wire 0.16mm 56Ω/m - 9,1m
Kanthal resistance wire with a resistance of 56 Ω / m. It is 9.1 m long and has a diameter of 0.16 mm. AWG value of the wire is 34.
Index: AKS-16660
Index: AKS-16660
6-axis motion sensor - accelerometer and gyroscope - DFRobot SEN0386
Powerful 6-axis sensor combines accelerometer and gyroscope. Allows you to determine the position of an object in space , measure the acceleration and angular velocity....
Index: DFR-19014
Index: DFR-19014
QwiicBus EndPoint - SparkFun COM-16988
QwiicBus system component, allowing to extend the range of the I2C communication bus. It uses NXP PCA9615 chip, which converts two default I2C signals (SDA data line and SCL...
Index: SPF-19394
Index: SPF-19394
JustPi THT CF carbon resistor 1/4W 240Ω - 30pcs.
The set consists of 30 pieces of resistors designed for THT through-hole mounting. The resistance is 240 Ohm and the tolerance is 5%.
Index: JUS-20002
Index: JUS-20002
- Reduced price
- SPECIAL OFFERS
JustPi THT CF carbon resistor 1/4W 47kΩ - 30pcs.
A set of 30 resistors. The electronic elements are designed for THT through-hole mounting. Resistance is 47 kΩ and tolerance is 5%.
Index: JUS-20156
Index: JUS-20156
Dedicated aluminum heatsink for Raspberry Pi CM4 - Waveshare 22097
Aluminum heat sink dedicated to the Raspberry Pi Compute Module 4 (CM4) , created by the company Waveshare. The heat sink covers the entire surface of the Raspberry Pi Compute...
Index: WSR-21715
Index: WSR-21715
DIY Magnetic Connector - simple 8-pin magnetic connectors - Adafruit 5469
Magnetic connectors are mounting elements that are very often used during prototyping systems, because they significantly facilitate and accelerate the process of...
Index: ADA-22190
Index: ADA-22190
4-digit 0.56'' display - 7-segment backpack - I2C - red - STEMMA QT / Qwiic - Adafruit 5599
7-segment display with a diagonal of 0.56'' from Adafruit. It enables the display of 4 digits with dots after each digit and one colon between digits 2 and 3. The digits of...
Index: ADA-22204
Index: ADA-22204
Fermion - I2S MEMS microphone module - DFRobot SEN0526
Microphone module based on MEMS technology by DFRobot. Works with microcontrollers with I2S audio outputs, such as ESP32. It is powered with a voltage of 3.3 V and can be...
Index: DFR-22460
Index: DFR-22460
Simply Robotics Motor Driver Board - motor driver - for Raspberry Pi Pico - Kitronik 5348
It imposes on the Raspberry Pi Pico extending the functionality of the module with the ability to control servos and motors. It allows you to simultaneously control 8 servos...
Index: KTR-22858
Index: KTR-22858
16MPx IMX519 camera - with M12 wide angle lens - for Raspberry Pi and OpenHD - ArduCam B0449
The Arducam brand camera equipped with a Sony IMX519 sensor with a 16 Mpx matrix is a high-quality module designed for Raspberry Pi and OpenHD users. It provides...
Index: ACM-24987
Index: ACM-24987
Analog Comparator LM339 - THT - 5pcs
Power supply 36 Volt or +/-18 V. DIP14 Case. Set of 5 pcs.
Index: UCC-00177
Index: UCC-00177
Index: UCC-00388
Triac BT138-600E 600V/12A - THT - 5pcs.
Vdrm voltage: 600 V. Current It: 12 A. Goal current Ig: max. 25 mA. Enclosure: TO220.
Index: UCC-01281
Index: UCC-01281
Index: ETN-01500
- Sale
- SPECIAL OFFERS
Module with analog-digital multiplexer 74HC4067 - SparkFun BOB-09056
Module with 16 channel CD74HC4067 multiplexer allows you to connect up to 16 signals to a single analog output. The system can work as a demultiplexer and work with digital...
Index: SPF-01630
Index: SPF-01630
Deflection sensor 73x6,3mm - SparkFun SEN-10264
During the bending, sensor increases its resistance. It can be used to detect hand movements, for example, crimping fists. Sensor length is 55 mm.
Index: SPF-01640
Index: SPF-01640
Step-Up Voltage Regulator U1V10F3 - 3,3V 1,2A - Pololu 2563
A step-up converter with a 3.3 V output voltage. Maximum input current up to 1.2 A. Supply voltage in the range 0.5 V - 5.5 V.
Index: PLL-01892
Index: PLL-01892
Smoke and flammable gas sensor MQ-2 - semiconductor - black
Module with smoke detector and flammable gas MQ-2 with the goldpin pins, pitch of 2.54 mm. It is powered with the voltage of 5 V. It has digital and analog output, making it...
Index: MOD-01911
Index: MOD-01911
Extended jumper for goldpin connectors - raster of 2.54 mm Price for 10 pieces.
Index: KAB-02076
Index: KAB-02076
NeoPixel Mini PCB - RGB LEDs WS2812 5050 - 5pcs - Adafruit 1612
Modules with individually addressed RGB LED WS2812 24-bit with built-in control unit and with holes. The module needs one microcontroller output. Board sizes: 10 x 8 mm.
Index: ADA-02947
Index: ADA-02947
MCP9808 - high precision I2C temperature sensor - Adafruit 1782
Module with digital thermometer MCP9808 operating in the range of -40 °C to 125 °C with an average accuracy of 0.25 C. It communicates via the I2C bus, it is powered with the...
Index: ADA-03144
Index: ADA-03144
Female socket 2x4, 2,54mm raster - 10 pcs.
Double row, female socket. Pitch : 2.54 mm. 10 pcs.
Index: KAB-03425
Index: KAB-03425