- New
- New
Heatsink with fan - for Odyssey-X86J4105 - Seeedstudio 114070141
Index: SEE-18808
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
SENSORS - Strona 23
Loading...
Gravity - CH423 I2C 24 Digital IO Expansion Module - DFRobot DFR0979
The CH423 pin expander from DFRobot allows you to expand the system by up to 24 additional digital I/O ports via the I2C interface. Among them, there are 8 GPIOs with...
Index: DFR-22275
Index: DFR-22275
Inductive proximity sensor LJ30A3-10-Z / BY 10mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of 15 mm. The object detection is...
Index: DNG-11875
Index: DNG-11875
Human Presence Detection Sensor - mmWave 24GHz - DFRobot SEN0395
mmWave boards are a series of utility modules that allow you to make measurements related to human life activities . The Human Presence Detection Sensor is based on the...
Index: DFR-22935
Index: DFR-22935
Inductive proximity sensor LJ30A3-15-Z / CY 15mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of 15 mm. The object detection is...
Index: DNG-11876
Index: DNG-11876
Grove - PCA9685 - 16-channel server driver, 12-bit PWM I2C
A 16-channel PWM generator useful when there is no microcontroller output. It allows, among others: controlling servomechanisms, adjusting motor speed or changing LED...
Index: SEE-13511
Index: SEE-13511
SHT35 - Digital Temperature and Humidity Sensor Breakout - DFRobot SEN0333
DFRobot temperature and humidity sensor with I2C communication. Its operation is based on the Sensirion SHT35 sensor chip. It is compatible with 3.3 V / 5 V Arduino type...
Index: DFR-17381
Index: DFR-17381
Grove - CO2 & Temperature & Humidity Sensor (SCD30)
The Grove module from Seeed Studio is equipped with a sensor of humidity, temperature and carbon dioxide. (SCD30) is a high precision carbon dioxide sensor based on Sensirion...
Index: SEE-14129
Index: SEE-14129
Light control sensor MCE83 - 4000W - on DIN rail
The sensor is used to turn on and off lights depending on the brightness level of the environment. Its operation i not influence neither by the temperature nor by the humidity....
Index: MOD-07008
Index: MOD-07008
- Sale
- SPECIAL OFFERS
DFRobot Gravity: module with EEPROM memory - I2C - 256kB
Module EEPROM from series Gravity, allows for memory expansion on the data with 256 KB in Arduino. Communication via the I2S interface. It saves data during a power outage. The...
Index: DFR-13242
Index: DFR-13242
IDC 10pin 1,27mm - microUSB adapter for PMS7003 sensor - soldered pins
The adapter allows you to transfer the signal from the IDC 10 pin connector to the microUSB connector, this allows you to connect the sensor directly to your computer. The...
Index: ZES-16479
Index: ZES-16479
- Sale
- SPECIAL OFFERS
Fermion - AS7341 11-channel visible light sensor - DFRobot SEN0365
A module manufactured by DFRobot with an embedded AS7341 chip. It is an 11-channel visible light sensor that uses a new generation of chip, the spectral sensor. The module...
Index: DFR-19201
Index: DFR-19201
OpenScale - strain-gauge bridge ATmega328P - SparkFun SEN-13261
Module for measuring the weight and temperature. It is used to read data from the strain-gauge sensors. It allows for calibration, setting the sampling frequency and accuracy....
Index: SPF-07276
Index: SPF-07276
- Sale
NTC 10kΩ thermistor with 2m cable
Thermistor of NTC type with a resistance of 10 kΩ. The connecting cable has a length of 2 meters.
Index: DNG-10931
Index: DNG-10931
DFRobot Gravity - vibration motor module
Module from the Gravity series with vibration motor for Arduino controlled with the PWM signal, low and high status. The supply voltage is 5 V.
Index: DFR-11287
Index: DFR-11287
Dust / air sensor SPS30 PM1.0 / PM2.5 / PM4 / PM10 - SPS30 - UART/I2C - SparkFun SEN-15103
The dust sensor allows monitoring of air purity and allows measurement of PM1.0, PM2.5, PM4 and PM10 particles. It is equipped with a high quality optical sensor that uses...
Index: SPF-15062
Index: SPF-15062
Gravity Temperature & Humidity Sensor - DHT20 - DFRobot SEN0497
Precise temperature and humidity sensor equipped with DHT20 chip. Factory calibrated, has a connector compatible with the Gravity series. Product manufactured by DFRobot, is...
Index: DFR-20376
Index: DFR-20376
Grove - LED Strip Driver v2.0 - LED driver for Arduino - Seeedstudio 105020002
A module that allows you to control the brightness of monochrome LED strip with LED RGB brightness and color. It has 2-pin connectors, power supply screw connector, 4-pin screw...
Index: SEE-04443
Index: SEE-04443
DFRobot Gravity - analog X dissolved oxygen sensor - SEN0237-A
Dissolved oxygen analog sensor compatible with Arduino. The module measures the concentration of dissolved oxygen in the water to determine its quality. It can be used, for...
Index: DFR-09968
Index: DFR-09968
Grove - relay 1 channel - 30A-250VAC / 30VDC contacts - 5V coil
Module with relay that control the actuators consuming the current of up to 30 A for the voltage of 250 V AC, 30 V DC using the ports of the microcontroller. The module is...
Index: SEE-11351
Index: SEE-11351
ISO1540 - I2C bidirectional isolator - STEMMA AT / Qwiic - Adafruit 4903
Bidirectional I2C isolator manufactured by Adafruit. It is used in projects that require electrical separation of devices on the same bus. Equipped with ISO1540 chip,...
Index: ADA-19253
Index: ADA-19253
Grove - 3-axis ADXL345 digital accelerator - I2C
3-axis digital compass from the Grove series. It is designed for measuring the acceleration along three axes in the range +/- 16 gr. The module is supplied with the voltage...
Index: SEE-11290
Index: SEE-11290
Grove - force sensor FSR402 with module - 2kg
Module from the Grove series, is equipped with a sensor of pressure force FSR402. The sensor communicates with the analog voltage signal. It is able to detect a pressure in...
Index: SEE-12595
Index: SEE-12595
Gravity - I2C/UART connection cable set - 4-pin male plug PH2.0 - 30cm - 10pcs. - DFRobot FIT0898
A set consisting of 10x connection cables with I2C / UART communication, equipped with a connector compatible with the Gravity standard and a 4-pin PH2.0 male goldpin...
Index: DFR-21235
Index: DFR-21235
Gravity - 360 degree roatry encoder module - DFRobot SEN0502
Another product from the Gravity series from DFRobot in the form of a module with a 360 ° rotary encoder. The encoder has a resolution of 20 pulses per revolution , each...
Index: DFR-21480
Index: DFR-21480