- New
Product Description: Cytron Maker Uno RP2040 - Arduino Compatible
Maker Uno RP2040 from Cytron is a modern development board combining the classic Arduino Uno form factor with the powerful Raspberry Pi RP2040 microcontroller. Equipped with a dual-core Arm Cortex-M0+ processor, it offers high performance and versatility, ideal for education and advanced hobby projects. It has 26 digital pins , 3 analog inputs and a 12-bit ADC converter, which enables precise measurements and control. Thanks to the large Flash memory (2 MB) and support for CircuitPython, MicroPython and Arduino IDE, this board allows for flexible project creation. It has been equipped with many conveniences from the Maker series , such as built-in LEDs , programmable buzzer, buttons, as well as Grove ports and dedicated ports for servo mechanisms. Ideal for beginners and advanced users.
Cytron Maker Uno RP2040 - Arduino compatible.
Board with Raspberry Pi RP2040 microcontroller.
Special Features of Maker Uno RP2040
- Dual-core Arm Cortex-M0+ processor (RP2040).
- CircuitPython, MicroPython and Arduino IDE support.
- 16 PWM channels, 2 I2C, 2 SPI and 2 UART controllers.
- 16 LED indicators for GPIO, programmable buzzer and buttons.
- 6 Grove ports, 4 servo ports.
- Support for Li-Pol / Li-Ion batteries with built-in protection.
To run the board, connect it to your computer using a USB cable, install your chosen development environment and select the Maker Uno RP2040 board in the Arduino IDE.
Arrangement of components on the board
- User button
- Buzzer
- Power LED
- Grove Connectors
- Maker Connector
- SPI connector
- RGB LEDs
- LED indicators for GPIO pins
- Boot button
- Reset button
- USB Type-C connector
- Charging LED
- Battery connector
- On/off switch
- Servo connectors
- GPIO connectors
Arrangement of elements.
Servo Integration
The board enables easy integration with servos thanks to its dedicated four servo ports . These ports provide a stable connection without the need for additional cables, and their power depends on the board's selected power source .
Power supply for the board
Maker Uno RP2040 can be powered via USB Type-C (5V) or by a single-cell Li-Pol / Li-Ion battery . The board has a built-in charging circuit with overcharge and discharge protection.
Technical specification
- Processor: Raspberry Pi RP2040, Arm Cortex-M0+, dual-core
- RAM: 264 KB
- Flash Memory: 2MB
- Interfaces: 2x I2C, 2x SPI, 2x UART
- GPIO Ports: 20
- USB connector: USB Type-C
- Power supply: USB (5V) or Li-Pol / Li-Ion battery
- Supported languages: CircuitPython, MicroPython, Arduino IDE
- Dimensions: 69.4 x 60.69 mm (compatible with Arduino Uno)
Contents of the set
- 1x Maker Uno RP2040 Board
- 1x Set of silicone feet (pack of 4)
- 4x Grove Cables to Female Connector
| Maker Uno vs Maker Uno RP2040 Specifications and Comparison | ||
|---|---|---|
| Model | Maker Uno | Maker Uno RP2040 |
| Microcontroller | ATmega328P | RP2040 |
| Architecture | 8-bit AVR | 32-bit ARM Cortex-M0+ |
| Clock frequency | 16MHz | 133MHz |
| Flash memory | 32 KB | 2MB |
| RAM | 2KB | 264KB |
| Number of GPIO pins | 14 | 30 |
| Interfaces | UART, I2C, SPI | UART, I2C, SPI, USB |
| Operating voltage | 5V | 3.3V |
| USB port | microUSB | USB Type-C |
| Dimensions | 75x54mm | 69.4 x 60.96mm |
