- New
- Reduced price
- Pack
- Sale
Set - Creality Hi 3D Printer + 4x Creality Hyper PLA Filament
Index: CRL-27627
- New
- Reduced price
- Pack
- Sale
- Sale
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 106
Loading...
Grove - LED Strip Driver v2.0 - LED driver for Arduino - Seeedstudio 105020002
A module that allows you to control the brightness of monochrome LED strip with LED RGB brightness and color. It has 2-pin connectors, power supply screw connector, 4-pin screw...
Index: SEE-04443
Index: SEE-04443
MSX Proto Hat for Raspberry Pi 4B/3B+/3B/2B
Board allows for self-creation of electronic circuits. It is connected directly to the GPIO pins of the Raspberry Pi minicomputer, version 4B / 3B+ / 3B / 2B.
Index: MSX-04552
Index: MSX-04552
Power module for micro ProtoPower breadboard - 3.3V 5V
Power module for a breadboard. It is supplied with a power supply or a phone charger via microUSB socket . It has a built-in stabilizer 3.3 Volts, and a switch that allows you...
Index: MSX-04554
Index: MSX-04554
DFrobot eClip - module tester/programmer AVR/Arduino
Tool for programming and testing small circuits that support ICSP or FTDI serial connection. It has pogo pins in 2 × 4 configuration. Kit for self-assembly.
Index: DFR-04576
Index: DFR-04576
Holding electromagnet 12V 8W 20kgf
The holding electromagnet powered with voltage of 12 V and a capacity of 8 W. It holds a weight of 20 kg in standard earth acceleration 9.8 m/s2. The body diameter is 40 mm and...
Index: MOD-04600
Index: MOD-04600
Test stand type ZIF for chips with 28 pins. It has a lever, thanks to which the multi-pin socket is crimped. The stand is equipped with gold-plated contacts. The raster...
Index: UCC-04737
Index: UCC-04737
Test stand type ZIF for chips with 28 pins. It has a lever, thanks to which the multi-pin socket is crimped. The stand is equipped with gold-plated contacts. The raster...
Index: UCC-04742
Index: UCC-04742
Portable LED tester is equipped a connector that allows you to test any LED current range from 1 to 150 mA. The device is powered by battery 9V.
Index: MOD-04745
Index: MOD-04745
A set of 100 numerical markers for 5mm cables
Set for marking wires with a diameter of 5 mm. Includes 10 markers with digits from 0 to 9 in different colors.
Index: KAB-04824
Index: KAB-04824
Step-Down Voltage Regulator D24V22F6 - 6V 2,5A - Pololu 2859
Step-down converter with 6 V output voltage. The maximum current is 2.5 A. The supply voltage is in the wide range from 6.4 V to 36 V. The module dimensions are 18 x 18 mm.
Index: PLL-04979
Index: PLL-04979
- Reduced price
- SPECIAL OFFERS
Prototype board for LED diodes SMD5050 - 10pcs. - Adafruit 1762
Prototype board to facilitate the use of SMD 5050. Outputs are openings for goldpin connector, raster 2.54 mm suitable for breadboards. Price for 10 pieces.
Index: ADA-05293
Index: ADA-05293
- Reduced price
- SPECIAL OFFERS
BNC socket with quick screw connection
BNC socket ended with the screw connector, to which you can quickly connect the wires.
Index: KAB-05352
Index: KAB-05352
Cables, measuring probes for multimeters - universal angular 85cm
The cables are terminated on one side with angled banana plugs with shielded ends of 4 mm diameter, on the other side with 110 mm long measurement probes. Cable length is 85 cm...
Index: UPM-05387
Index: UPM-05387
Raychem RXEF110 Polymer fuse 72V/1.1A raster 5.1mm - 10pcs
Polymer fuse that operates up to 72 volts and allows up to 1.1 amps of current to flow. Price per 10 pieces.
Index: KAB-05477
Index: KAB-05477
ZP2 industrial connector with quick connection - 2-pin
Industrial connector for quick connection of the 2-wire cable.
Index: KAB-05821
Index: KAB-05821
Plastic case Kradex Z29 - 132x98x29mm black
Two-part universal electronic housing made of black ABS. To assemble the housing, use the mounting screws included in the set along with the feet for the housing. External...
Index: KDX-05880
Index: KDX-05880
- Sale
IR pilot with two keys. It allows you to create a wireless connection with any microcontroller with an IR receiver.
Index: DFR-05962
Index: DFR-05962
DFRobot Gravity - relay 1 channel - 10A/277VAC contacts - 5V coil
Module with relay that allows for the control of the actuators consuming the current of up to 12 A for the voltage of 125 V or 10 A for 277 V through the ports of the...
Index: DFR-05964
Index: DFR-05964
FeatherWing Ultimate GPS MTK3339 GPS module with antenna - trim to Feather - Adafruit 3133
Module from the Feather family is equipped with a GPS system. It can track 22 satellites, is working with a voltage from 3.0 V to 5.5 V, the frequency of the update is 10 Hz....
Index: ADA-06564
Index: ADA-06564
ArduCam OV5642 5MPx camera module + lens HQ CS mount
Camera module with OV5642 matrix with a resolution of 5 MPx and the size of 1/4". Transfer rate in full resolution of 2592 x 1944 px, is 15 fps. It is equipped with a CS mount...
Index: ACM-06654
Index: ACM-06654
ArduCam OV5642 5MPx camera module + lens HQ M12x0.5
Camera module with OV5642 matrix with a resolution of 5 MPx and the size of 1/4" with output in JPEG format. Transfer rate in full resolution of 2592 x 1944 px, is 15 fps. It...
Index: ACM-06664
Index: ACM-06664
Heat sink with the size of 40 x 40 x 11 mm. It is c ompatible with stepper motors from the series NEMA17.
Index: ETN-06668
Index: ETN-06668
- Reduced price
- SPECIAL OFFERS
Assembly bar female 3-pin, raster 5,08mm, steel
Seperable terminal block, female, 3-pin. Pitch of 5.08 mm. Height is 15.1 mm. Screw on the flat screwdriver (-).
Index: KAB-07114
Index: KAB-07114
- Sale
- SPECIAL OFFERS
Load Sensor Combinator (Ver. 1.1) - SparkFun BOB-13878
The module allows you to connect 4 load sensors - strain-gauge beams to one of the bridge via 4-wire cable. It finds application, for example, in the construction of the...
Index: SPF-07277
Index: SPF-07277