- New
- New
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 179
Loading...
ON-OFF switch monostable - PBW-12B - 2A 250V flat
The monostable flat switch with the load capacity of the contacts: 2 A for 250 V.
Index: NSZ-09793
Index: NSZ-09793
Round rubber grommet 20mm - 10pcs.
Rubber cable gland with the thread of 20 mm. Prevents the cable passing through the body wall from rubbing. Designed for wire diameters from 19 mm to 21 mm.
Index: KAB-09917
Index: KAB-09917
DFRobot Gravity - IR receiver 38kHz
The IR receiver from the Gravity series, operating at a frequency of 38 kHz with a voltage of 5 V. The module allows to receive commands from the IR transmitter. The...
Index: DFR-11267
Index: DFR-11267
Grove - analog NTC temperature sensor
Analog sensor is compatible with Arduino and Raspberry Pi. It is powered with the voltage from 3.3 V to 5 V. It can measure temperature in the range from -40 °C to 125 °C with...
Index: SEE-11356
Index: SEE-11356
Gravity - segment display 8-digital I2C - red - DFRobot DFR0646-R
The 8-digit, 8-segment Gravity series display allows you to adjust the brightness of the characters displayed, thanks to a 16-degree adjustment. The device has an I2C...
Index: DFR-16311
Index: DFR-16311
ARCADE console for MakeCode Arcade - Retail Pack - Kitronik 5319
Kitronik Arcade is a small console for games created by yourself in MakeCode Arcade or using JavaScript or Python. The board has a 1.77" colour LCD display. 6 action...
Index: KTR-16882
Index: KTR-16882
Grove - module with passive buzzer - Seeedstudio 107020109
A module with a passive buzzer that allows you to change the sound tones by adjusting the PWM frequency. The buzzer can be used as an alarm siren, its maximum volume is 80 dB...
Index: SEE-17268
Index: SEE-17268
Step-Up/Step-Down Voltage Regulator S13V10F5 - 5V 1A - Pololu 4083
Step-up / step-down voltage converter with 5 V output voltage and 1 A current capacity. The input voltage range is 2.8 V to 22 V . This type of inverter makes it...
Index: PLL-21022
Index: PLL-21022
DRV8434S stepper motor driver 48V/2A SPI - Pololu 3768
Stepper motor driver module based on the DRV8434S chip from Texas Instruments. It is powered with the voltage in the range from 4.5 V to 48 V. It offers a wide range of step...
Index: PLL-22219
Index: PLL-22219
King - wireless rodent repeller - Viano ODA-2
The King wireless repeller from Viano is one of the most powerful repellers available on the market. Effectively repels martens, weasels, rats, mice and other rodents without...
Index: VIA-23388
Index: VIA-23388
Multi-GNSS module - LC76G - GPS, BeiDou (BDS), GLONASS, QZSS - Waveshare 23721
The Multi-GNSS LC76G module from Waveshare is used to determine positioning using GPS, BeiDou, GLONASS, Galileo and QZSS navigation systems. It offers easy integration with...
Index: WSR-23562
Index: WSR-23562
IPS LCD display module with a diagonal of 1.69'' offering a resolution of 240 x 280 px and a vivid spectrum of 262,000 colors included in the RGB gamut. The built-in...
Index: SEE-23899
Index: SEE-23899
DAC - AD5693R - 16-bit - I2C - STEMMA QT/Qwiic - Adafruit 5811
A product from Adafruit equipped with a 16-bit AD5693R digital-to-analog converter, which is responsible for converting the digital signal from any microcontroller...
Index: ADA-23979
Index: ADA-23979
MC33926 - single-channel 28V/2,5A engine controller - Pololu 1212
Module with single-channel MC33926 operating with voltages from 5 V to 28 V. The maximum continuous output current is 2.5 A.
Index: PLL-01322
Index: PLL-01322
USB A cable 0,3 m with plug 1x5
Cable with USB type A plug and a 1x5 plug, pitch of 2.54 mm (goldpin) with a length of 30 cm.
Index: KAB-01901
Index: KAB-01901
MicroUSB type B 5 pin - connector for breadboard - Pololu 2586
Connector allows you to connect microUSB connectores with 5-wire connector type B to a breadboard. The module is suitable for a standard breadboard and connection cables,...
Index: PLL-02050
Index: PLL-02050
Bluetooth Low Energy module (BLE 4.0) - NRF51822 - mini version - Waveshare 10649
The communication module is working in the Bluetooth BLE 4.0 standard at a distance of up to 30 meters. Unlike classic BT, BLE has no legal restrictions, iOS apps can be freely...
Index: WSR-04463
Index: WSR-04463
Set of 13 modules with cables for Arduino - Waveshare 9467
Set of 13 popular modules compatible with Arduino plates. In the set are i.a.: sensors of flames, color, soil moisture, rotation, sound, liquid level and many others. The...
Index: WSR-04511
Index: WSR-04511
DRV8833 DC/Stepper Motor Driver Breakout Board - Adafruit 3297
Dual channel DC motor controller. Continuous current per channel 1.2 A (momentary up to 2 A). Supply voltage ranges from 2.7 V to 10.8 V.
Index: ADA-07665
Index: ADA-07665
Toroidal transformer Indel TST20/006 20W 230V/2x14V
Toroidal transformer made by Indel. The primary voltage is 230 V, the secondary is 2 x 14 V. The power is equal to 20 VA.
Index: MOD-07878
Index: MOD-07878
DFRobot Gravity - analog signal isolator
The module prevents the operation interference of the sensors through the insulation of the analog signal and providing an isolated power for sensors. It is supplied with the...
Index: DFR-09529
Index: DFR-09529
USB - DuPont converter for Lidar TFmini / TFmin Plus sensor
UART converter enabling connection of Lidar TFmini or TFmini Plus distance sensor with a computer via USB cable. There is also cable for connection with the sensor included.
Index: BEN-15876
Index: BEN-15876
Pressure and temperature sensor DPS310 with Grove connector. The measuring range of pressure is from 300 hPa to 1200 hPa and temperatures from -40°C to 85°C. The accuracy...
Index: SEE-16091
Index: SEE-16091
The memory module 16 GB eMMC with Linux operating system for the Odroid N2
eMMC memory with preinstalled Linux system for Odroid N2 minicomputer. Equipped with eMMC interface with 8-bit DDR mode. The installed system allows you to work with the...
Index: ODR-16159
Index: ODR-16159