- New
Set - Creality Hi 3D Printer + 4x Creality Hyper PLA Filament
Index: CRL-27627
- New
- Reduced price
- Pack
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 19
Loading...
Peltier Cell TEC1-12705 12V / 5A
The cooling cell applied, for example, in portable refrigerators. It is supplied with the voltage up to 12 V, it consumes up to 5 A of current. Board sizes - 40 x 40 x 4 mm.
Index: DNG-10021
Index: DNG-10021
Bracket for PIR SR501Px motion detector
Transparent bracket for the popular PIR motion detector with mounting holes. Made of acrylic .
Index: GRL-10385
Index: GRL-10385
ARK connector 5mm 3 pin (+) - 5pcs
Screw, clamp, 3-pin conector. Pitch of 5 mm. Height of 8.4 mm. The screw for the cross screwdriver (+). Price for 5 pcs of conectors.
Index: GRL-13565
Index: GRL-13565
Flipper Zero Silicone Case - Orange
Silicone casing designed for the Flipper Zero communication device. Made by injection molding, it perfectly protects the device against impacts and abrasions, while...
Index: LAB-23582
Index: LAB-23582
Grove - a set of 5 wires 4-pin 2mm - male cables 2.54mm/20cm
A set of five wires 4-pin Grove male wires 2.54 mm. They are used to connect Grove sensors with boards incompatible with the Grove raster 2.54 mm wires, for example Arduino.
Index: SEE-04402
Index: SEE-04402
JustPi THT CF carbon resistor 1/4W 1,5Ω - 30pcs.
The set consists of 30 resistors. The elements are designed for THT through-hole mounting. Resistance is 1.5 Ω and tolerance is 5%.
Index: JUS-20007
Index: JUS-20007
AVR microcontroller - ATmega8A-PU DIP
Microcontroller from Atmel AVR 28-leg DIP case. Voltage supply range from 2.7 V to 5.5 V, frequency up to 16 MHz, has 8 KB Flash, 1 KB RAM, 512 B of EEPROM.
Index: UCC-00078
Index: UCC-00078
ARK connector raster 3,5mm 2 pin (+) - 5pcs
Screw, clamp, 2-pin conector. Pitch of 3.5 mm. Height of 8.4 mm. The screw for the cross screwdriver (+). Price for 5 pcs of conectors.
Index: KAB-02554
Index: KAB-02554
MicroUSB B - A cable with switch - 1,5m
USB (typ A) - microUSB (B type) cablewith a switch. Connector can be used to power the Raspberry Pi minicomputer with the possibility of cutting off the power without needing...
Index: KAB-02648
Index: KAB-02648
The NTC 110 thermistor with a resistance of 100 KΩ and a tolerance of 5 %.
Index: SES-04952
Index: SES-04952
Elektrobim gate automation remote control - 433,92 MHz - 4-channel
This remote control is designed for Elektrobim gate control units. It allows you to control up to four devices with a single remote. The remote's buttons are arranged one...
Index: ELB-18482
Index: ELB-18482
The SenseCAP Card Tracker T1000-E is a high-performance locator designed for the Meshtastic system , about the size of a credit card. This allows it to be attached to objects...
Index: SEE-25284
Index: SEE-25284
The 64GB microSD card is the perfect choice for Raspberry Pi users. Equipped with the Raspberry Pi OS , it is ready to go right out of the box. The set also includes a...
Index: RPI-25742
Index: RPI-25742
Socket 1x4pin - 2,54mm - 10pcs.
4-pin connector, easy to solder onto the PCB. It is used, for example, for connecting the male wires. Pitch is equal to 2.54 mm.
Index: UCC-08503
Index: UCC-08503
Cytron MD13S - single-channel 30V / 13A motor controller
Single channel DC motor controller. Continuous current per channel 13 A (momentary 30 A ). Supply voltage from 5 V to 30 V. There is a Grove connector on the board.
Index: CTN-12412
Index: CTN-12412
LED strip RGB WS2812 5050 x 8 LEDs - 53mm - soldered connectors
A strip consisting of 8 individually addressed RGB 8080 LEDs with integrated controller. One microcontroller pin is sufficient to operate the module. The strip is 53 mm...
Index: LED-16152
Index: LED-16152
Kanthal A1 resistance wire 0,81mm 2,85Ω/m - 30,5m
Kanthal A1 resistance wire. It is characterized by high temperature resistance of 1400° C. The 0.81 mm diameter wire, wound on a spool, is 30.5 m long. The resistance of the...
Index: AKS-16670
Index: AKS-16670
Encoder 24 impulse 20mm - EC12 vertical - 5pcs.
Knob in the form of an encoder that allows you to create a simple user interface. The module sends the digital signal to one of the two pins, depending on the direction of...
Index: MOD-06905
Index: MOD-06905
- Sale
- SPECIAL OFFERS
LED Strip SMD2835 IP65 9,6W, 120 LED/m, 8mm, warm white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 9.6 W/m, density of 120 diodes per meter. The color of the light is warm white. Protection...
Index: LED-07086
Index: LED-07086
Laser diode 5mW red 650nm 5V - dot
The laser module emits a light in the form of a red dot. Its power is <5mW. Voltage supply from 3 to 5 V.
Index: DNG-11815
Index: DNG-11815
Straight goldpin 2x40 connector with 2,54mm pitch - yellow - 10pcs. - justPi
Double row male goldpin plug with 80 pins . The pins' pitch is 2.54 mm and the connector housing is yellow . The goldpin connector is a type of pin connector , which...
Index: JUS-20032
Index: JUS-20032
Debug cable for Raspberry Pi Pico - JST-SH-female - 20cm
3-pin debugger cable for Raspberry Pi Pico. It has a JST-SH connector on one end and a female connector on the other. The length of the cable is about 20 cm .
Index: DNG-22691
Index: DNG-22691
Radio module transmitter FS1000A + receiver 433 MHz
The set includes a transmitter and receiver that communicate with each other at a frequency of 433 MHz. The devices are powered with the 5 V voltage, communication with the...
Index: MOD-03191
Index: MOD-03191