Filament set - Rosa3D Refill PLA-CF Matt Home Decor 1,75mm 4x 1kg
Index: ROS-27713
- New
- Reduced price
- Pack
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
Genibot - Pre-school education with Genibot - part I - Anna Świć
Index: OZB-18694
- Reduced price
- Sale
ELECTRONICS - Strona 29
Loading...
I2C converter for HD44780 LCD display
The I2C converter for the popular display with controller HD44780 for example, 2x16 characters. Thanks to this system, two data lines and supply 5 Volts and groundare enough...
Index: LCD-02352
Index: LCD-02352
LED Strip SMD2835 IP20 4.8W, 60 LEDs/m, 8mm, warm color - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 4.8 W/m, density of 60 diodes per meter. The light color is warm white, protection factor IP20....
Index: LED-05158
Index: LED-05158
BLS connector - 1x10 socket - 5pcs.
Socket for BLS type cable, 2.54 mm pitch. The set includes 5 1x10 sockets.
Index: KAB-05205
Index: KAB-05205
Switch ON-OFF momentary, round 250V/3A - red
Switch with a round attachment with the contact's loading capacity of 3 A for 250 V. Items are sold in sets of 10 pieces.
Index: UCC-05268
Index: UCC-05268
SN65HVD230 CAN Board - Waveshare 3945
The module based on the SN65HVD230 allows connecting a microcontroller to the CAN bus. The chip is pinout compatible with the PCA82C250. The module is powered by 3,3 V and...
Index: WSR-06960
Index: WSR-06960
Slot for 4-pin cable, pitch of 2.00 mm. Set includes 5 slots of 4x1.
Index: KAB-08572
Index: KAB-08572
DFRobot FireBeetle ESP32 IOT wi-fi, Bluetooth
The FireBeetle microcontroller is compatible with the Arduino Uno. It integrates the Du al-Core ESP-WROOM-32 module which supports communication in the MCU, wi-fi and...
Index: DFR-09153
Index: DFR-09153
Breadboard is used for creating and testing electronic circuits in color yellow.
Index: AKS-10284
Index: AKS-10284
Breadboard is used for creating and testing electronic circuits in color green.
Index: AKS-10287
Index: AKS-10287
Splitter for LED strip - 6 inputs - 6-24V/3A
The splitter enables connection of several LED circuits. Voltage from 6 to 24V, current up to 3 A.
Index: LEC-11647
Index: LEC-11647
- Sale
- SPECIAL OFFERS
Relay module Iduino 4 channels - 10A/250VAC contacts - 5V coil
Module with four SRD-05 relays with a 5 V coil and optical insulation of the input as well as mounting holes. The system allows you to control the actuators by means of...
Index: OST-14480
Index: OST-14480
Membrane keypad - 1 blue key - self-adhesive
The keyboard with one key in blue has been equipped with a self-adhesive tape which allows to place the keyboard on any surface and in any place. The connectors of the...
Index: DNG-16988
Index: DNG-16988
LED 3mm green - 10pcs. - justPi
A set of 10 pieces of light emitting diodes (LED) in green , with a lens diameter of 3 mm. The LED is the most popular diode. It emits radiation in the visible light range....
Index: JUS-19987
Index: JUS-19987
10-pin socket (2x5), straight, for printing (pitch: 2.54 mm). Price for 5 pieces.
Index: KAB-00191
Index: KAB-00191
ARK connector KF301 raster 5,0mm 3 pin (-) - 5pcs
Screw, clamp, 3-pin conector. Pitch of 5 mm. Height of 10 mm. The screw for the flat screwdriver (-).
Index: KAB-00808
Index: KAB-00808
The module that facilitates the connection of the SD card to the main board (e.g. Arduino or STM32Discovery). It is powered with the voltage of 5 V or 3.3 V. The communication...
Index: MOD-01507
Index: MOD-01507
BLS connector - socket 8x2 - 5szt.
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 8x2.
Index: KAB-04159
Index: KAB-04159
WiFi module ESP-12E + NodeMCU v2 - 4MB
Wi-fi module, based on ESP-12E ESP8266. On Board, 10 GPIO ports (each of which can handle PWM, I2C and 1-wire), built-in 10-bit ADC and a Converter USB-UART. It has installed...
Index: SEE-04450
Index: SEE-04450
Potentiometer knob GS18 gray-red - 6/18mm - 5pcs.
Knob for rotation potentiometer on axis of 6 mm. The height is 12.5 mm and an external diameter is 18 mm.
Index: MOD-05738
Index: MOD-05738
Inveo - RFID-USB-DESK reader - Unique 125kHz
Inveo module for reading data from RFID devices in the Unique 125 kHz standard. The reader connects to the USB port. The system is seen as a virtual COM port. It has 3 LEDs and...
Index: INV-09123
Index: INV-09123
Disk for optical encoders - 25mm
Disk of optical encoder is designed for installation in engines with a shaft with the size of 5 x 4 mm. The outer diameter is equal to 25 mm.
Index: DNG-12457
Index: DNG-12457
OBD-II CAN-BUS Development Kit
OBD-II CAN-BUS Development Kit for Arduino, Raspberry, Beaglebone and other minicomputers, allowing to connect the computer with the vehicle's OBD-II interface and perform...
Index: SEE-14341
Index: SEE-14341
MicroHDMI cable - HDMI 2.0 original for Raspberry Pi 4/5 - 2m - black
Officially licensed by the Raspberry Pi Foundation microHDMI cable to connect RPi 4 or RPi 5 minicomputer with monitor. 2 m long model in black .
Index: RPI-16337
Index: RPI-16337
Electromagnet holding 12V 6W 55kgf
Holding electromagnet with a rated power of 6 W. Powered by 12 V. Current consumption is approximately 500 mA. The device maintains a mass of 55 kg under standard...
Index: DNG-17578
Index: DNG-17578