- New
- On sale!
- Promotion
- On sale!
- Promotion
GJ-C2725-650 M12 2,7mm 15Mpx lens - for Raspberry Pi camera
Index: RPI-22484
- Reduced price
- Promotion
- Reduced price
- Promotion
Arduino sensors - Strona 6
Loading...
ACS711EX current sensor ACS711EX -15A to + 15A - Pololu 2452
Current sensor working in the range of +/-15 A based on the Hall effect. The output is an analog voltage. Supply voltage is from 3.0 V to 5.5 V.
Index: PLL-01690
Index: PLL-01690
Relay module with Grove connector in 1.2 version. It allows you to control the executive elements by cutting off or supplying power. For proper operation it requires a 3.3 V to...
Index: SEE-11347
Index: SEE-11347
Grove - 4-pin screw connection
Module from the Grove series with a 4-pin screw connection of 3.5 mm. It is designed to connect the cables with diameter from 0.2 mm to 0.8 mm for the microcontroller. It has...
Index: SEE-11348
Index: SEE-11348
Grove - 10kΞ© linear rotary potentiometer - top connector
Potentiometer 10 kOhm with linear rotary. It as a 300Β° range of rotation. It h as a 4-pin Grove connector on the side of the handle.
Index: SEE-04433
Index: SEE-04433
Grove - Buzzer - module with active buzzer
Active buzzer module from Grove. It e mits a uniform tone after taking a high position. When using PWM, it can generate different sounds and effects. The power voltage from 4...
Index: SEE-11298
Index: SEE-11298
Grove - TSL2561 - digital I2C ambient light sensor
Module from Grove with a digital sensor measuring the light intensity of the environment. It has a linear spectral response in the visible light range to the human eye. The...
Index: SEE-11303
Index: SEE-11303
Grove RS-485 module allows to connect Arduino to RS-485 bus. Easy to use plug and play device. The module features high stability and supports 500 kB/s error free...
Index: SEE-14130
Index: SEE-14130
Grove - rotary encoder with a button
Knob in a form of an encoder with a button that allows you to create a simple user interface. The module sends a digital signal to the SIGA and SIGB outputs, depending on the...
Index: SEE-11309
Index: SEE-11309
The control module from a Grove series. It has a built-in tact-switch system and pull-down resistor. It communicates with the microcontroller through a digital signal.
Index: SEE-13344
Index: SEE-13344
Grove - UV sensor - analog module
UV sensor with voltage supply from 3.3 V to 5 V. Output analog voltage, proportional to the intensity of UV radiation. The sensor can be used to detect harmful solar radiation.
Index: SEE-08307
Index: SEE-08307
RGB LED Matrix 8 x 8 with a control unit, designed to display simple images and patterns of 64 pixels LEDs, and 255 colors for each pixel, which gives almost unlimited...
Index: SEE-13665
Index: SEE-13665
Grove - TH02 - I2C temperature and humidity sensor
Temperature and humidity sensor TH02 from Grove with I2C interface. The temperature measurement range is from 0 Β°C to 70 Β°C and humidity from 0 to 80% RH .
Index: SEE-04413
Index: SEE-04413
ADT7410 - High Accuracy I2C Temperature Sensor Breakout Board - Adafruit 4089
Adafruit temperature sensor with high accuracy with digital thermometer ADT7410 in the range of -40Β°C to +105Β°C equipped with interface I 2 C (TWI). The supply voltage ranges...
Index: ADA-13951
Index: ADA-13951
Grove - Collision Sensor - collision and vibration sensor
Collision sensor from Grove. It detect collision and vibration. It has an additional external circuit, to reduce the effect of ambient noise. The module is supplied with the...
Index: SEE-11300
Index: SEE-11300
Gravity - LED Switch Blue - LED Illuminated Button - Blue - DFRobot DFR0789-B
The module is equipped with a button manufactured by DFRobot. An additional advantage is the backlight, which is responsible for the built-in LED. When pressed, the button...
Index: DFR-19914
Index: DFR-19914
RFID Qwiic Reader - SparkFun SEN-15191
Easy to use RFID reader module is equipped with Qwiic connectors based on the I2C interface. It works with systems series ID-3LA, ID-12LA and ID-20LA. The board allows you to...
Index: SPF-14072
Index: SPF-14072
Gravity - analog AC current sensor - up to 5A - DFRobot SEN0287
Analog AC current sensor from DFRobot with a 1 m long probe . It allows you to measure the current flowing in the wire without having to cut it - the measurement is made...
Index: DFR-23730
Index: DFR-23730
