Arduino Grove series - Strona 7
Grove - multichannel gas sensor - Seeedstudio 101020820
Plate with four independent gas sensors: GM-102B, GM-302B, GM-502B, GM-702B , which can detect various gases such as carbon monoxide, nitrogen dioxide, ethyl alcohol, organic...Grove - Variable Color LED v1.1
Module with RGB LED and Grove connector. The color of the LED can be changed by digital signal and PWM, as well as by potentiometers on the board. The module is powered from...Grove - TH02 - I2C temperature and humidity sensor
Temperature and humidity sensor TH02 from Grove with I2C interface. The temperature measurement range is from 0 °C to 70 °C and humidity from 0 to 80% RH .Grove - infrared thermometer OTP-538U IR
Module from the Grove series, based on a sensor OTP-538U which, to measure the temperature, is using the analysis of infrared radiation in the range from -10 °C to 100 °C. It...Grove - ITR9909 reflectance sensor v1.2
Module from the Grove series is based on a reflective sensor ITR9909. It consists of LED emitting the infrared light and phototransistor of high sensitivity. It is supplied...Grove - L298P - two-channel motor driver 12V/2A - Seeedstudio 105020093
A module with an L298P motor controller that supports two DC motors or one stepper motor. The voltage supported by the controller is between 6 V and 12 V and the continuous...Grove - Collision Sensor - collision and vibration sensor
Collision sensor from Grove. It detect collision and vibration. It has an additional external circuit, to reduce the effect of ambient noise. The module is supplied with the...Grove - L298N - two-channel motor controller 15V / 1A
Grove series module equipped with a two-channel H-bridge L298N , controlled by ATmege 8L. The circuit allows to regulate the direction of rotation of motors with maximum...Grove - dust / purity air sensor PM2.5 PPD42NS - 5V PWM
Sensor of dust allows you to monitor the purity of the air. It is equipped with a sensor that can detect PM 2.5 particles with a diameter above 1 μm, such as cigarette smoke....Grove - LED RGB module - 15 diodes WS2813 - Seeedstudio 104020172
Module with 15 WS2813 RGB LEDs arranged in one row. There is a Grove connector on the board for easy connection of the module to the base plate. Each LED is individually...Grove - 3 Axis Digital Accelerometer 16g Ultra - Low Power (BMA400)
Grove module 3-axis ±16 g low power digital accelerometer. It is a 12-bit digital three-axis sensor that detects acceleration and movement. Based on a BMA400 chip. Powered by...Grove - RGB LED Ring WS2813 x 24 LEDs - 70mm - Seeedstudio 104020168
The module in the form of a ring with a diameter of 70 mm equipped with 24 RGB LEDs with the WS2813 controller. Each of the diodes can be individually addressed. The ring...Grove - module with LED RGB WS2813 diode - Seeedstudio 104020169
The module is equipped with RGB LED with WS2813 chip. It works with a voltage of 3.3 V and 5 V . The use of Grove connector makes it much easier to connect the module to...Grove - Lightning Sensor - AS3935 - Seeedstudio 101021072
The Grove AS3935 sensor is an advanced, easy-to-use sensor that can detect both cloud-to-ground and intra-cloud lightning , up to a 40 km radius. It communicates via the...Grove - module with Bluetooth 3.0 with EDR
Module from the Grove series, allowing to connect via Blootooth v3.0 + EDR, class 2. It works with a voltage of 5 V, it communicates through the Grove standard slot, it...Arduino MKR Connector Carrier ASX00007 - shield for Arduino MKR
Module for Arduino from the MKR that extends the capabilities of I/O pins. It is designed for modules and sensors from the Grove series. It has 4-pin connectors, works with...Grove - module cover 1x2 blue - 4pcs.
Shield for the modules from Grove series in green color with size of 50 x 25 x 13 mm. It is also compatible with Lego and Makeblock. Allows you to mount two small or one large...- Discontinued product
Grove - set of 5 female-female 4-pin - 2mm / 40cm with latch
A set containing five 4-pin Grove cables with a clip, 40 cm long. The cables are used to connect the sensors to the Grove connector with the base cover.Grove - Red Wrapper 1x2 - 4pcs
Grove series modules cover in red with dimensions 50 x 25 x 13 mm. The cover is compatible with Lego and Makeblock blocks so it is possible to create complex projects. It...- Discontinued product
Grove - temperature and humidity sensor SHT31 I2C
The module is equipped with SHT31 temperature and humidity sensor. On the board there is a Grove connector for easy connection of the module to the Base Shield cover. It...BitPlayer - game controller, expanision for BBC micro:bit
BitPlayer extension for the BBC micro:bit to create your own wireless gaming controller. The board works on the Plug & Play principle and features a 2-axis joystick , 6...
