- New
Sonoff M5-4C-80-FW - frame for wall switch M5-80 - quadruple - white
Index: INN-25518
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
Arduino Grove series - Strona 6
Loading...
Grove - ITR9909 reflectance sensor v1.2
Module from the Grove series is based on a reflective sensor ITR9909. It consists of LED emitting the infrared light and phototransistor of high sensitivity. It is supplied...
Index: SEE-11325
Index: SEE-11325
Grove - L298P - two-channel motor driver 12V/2A - Seeedstudio 105020093
A module with an L298P motor controller that supports two DC motors or one stepper motor. The voltage supported by the controller is between 6 V and 12 V and the continuous...
Index: SEE-16906
Index: SEE-16906
Grove - Collision Sensor - collision and vibration sensor
Collision sensor from Grove. It detect collision and vibration. It has an additional external circuit, to reduce the effect of ambient noise. The module is supplied with the...
Index: SEE-11300
Index: SEE-11300
- Reduced price
- SPECIAL OFFERS
Grove - dust / purity air sensor PM2.5 PPD42NS - 5V PWM
Sensor of dust allows you to monitor the purity of the air. It is equipped with a sensor that can detect PM 2.5 particles with a diameter above 1 μm, such as cigarette smoke....
Index: SEE-13331
Index: SEE-13331
Grove - HP206C Pressure sensor I2C
High quality Grove pressure sensor, equipped with HP206C. It has a wide measuring range from 300 hPa to 1200 hPa. It is fully compatible with Arduino, it is connected to it via...
Index: SEE-14985
Index: SEE-14985
- Reduced price
- SPECIAL OFFERS
Grove - LED RGB module - 15 diodes WS2813 - Seeedstudio 104020172
Module with 15 WS2813 RGB LEDs arranged in one row. There is a Grove connector on the board for easy connection of the module to the base plate. Each LED is individually...
Index: SEE-15556
Index: SEE-15556
Grove - 3 Axis Digital Accelerometer 16g Ultra - Low Power (BMA400)
Grove module 3-axis ±16 g low power digital accelerometer. It is a 12-bit digital three-axis sensor that detects acceleration and movement. Based on a BMA400 chip. Powered by...
Index: SEE-14739
Index: SEE-14739
- Reduced price
- SPECIAL OFFERS
Grove - module with LED RGB WS2813 diode - Seeedstudio 104020169
The module is equipped with RGB LED with WS2813 chip. It works with a voltage of 3.3 V and 5 V . The use of Grove connector makes it much easier to connect the module to...
Index: SEE-15553
Index: SEE-15553
Grove - Lightning Sensor - AS3935 - Seeedstudio 101021072
The Grove AS3935 sensor is an advanced, easy-to-use sensor that can detect both cloud-to-ground and intra-cloud lightning , up to a 40 km radius. It communicates via the...
Index: SEE-23887
Index: SEE-23887
Grove - module with Bluetooth 3.0 with EDR
Module from the Grove series, allowing to connect via Blootooth v3.0 + EDR, class 2. It works with a voltage of 5 V, it communicates through the Grove standard slot, it...
Index: SEE-13345
Index: SEE-13345
Grove - LED String Light - LED driver
Grove series module that allows you to control the LED strip included in the kit . The supply voltage is from 3.3 V to 5 V. Since the LEDs work with 12 V, the module is...
Index: SEE-11329
Index: SEE-11329
- Reduced price
- SPECIAL OFFERS
Arduino MKR Connector Carrier ASX00007 - shield for Arduino MKR
Module for Arduino from the MKR that extends the capabilities of I/O pins. It is designed for modules and sensors from the Grove series. It has 4-pin connectors, works with...
Index: ARD-12947
Index: ARD-12947
Grove - a set of 5 wires 4-pin 2mm - female wires 2.54mm/30cm
A set of five 4-pin Grove female wires. They are used to connect Grove sensors with a board incompatible with the Grove raster 2.54 mm wires, such as Raspberry Pi. Length is...
Index: SEE-04401
Index: SEE-04401
Grove - LM358 Ambient Light Sensor v1.2
Module from the Grove series is equipped with a sensor LM358. The sensor allows to determine the intensity of the light and reflects the analog voltage signal back to Arduino....
Index: SEE-11330
Index: SEE-11330
Grove - sensor / probe for measuring soil moisture v1.4 - analog
The sensor allows you to determine the moisture level of the soil. It is supplied with the voltage from 3.3 V to 5 V. The output has analog voltage, which increases its value...
Index: SEE-11338
Index: SEE-11338
Grove - a set of 5 female-female 4-pin - 2mm/20cm cables without latch
A set of five 4-pin cables Grove, raster 2 mm. They are used to connect Grove sensors with Base Shield Board. Cable length is 20cm. Version without a latch.
Index: SEE-04395
Index: SEE-04395
Grove - 10kΩ linear rotary potentiometer - top connector
Potentiometer 10 kOhm with linear rotary. It as a 300° range of rotation. It h as a 4-pin Grove connector on the side of the handle.
Index: SEE-04433
Index: SEE-04433
Grove Shield for Raspberry Pi Pico - Seeedstudio 103100142
Grove frontend for Raspberry Pi Pico module . Converts Pico GPIO connectors to Grove type connectors such as I2C, UART and digital and analog ports. It allows you to...
Index: SEE-18902
Index: SEE-18902
Grove - Base Shield for Arduino Nano
Shield for Arduino Nano is a board fully compatible with Seeeduino Nano. It has 8 connectors, so it is possible to connect many devices, sensors, Grove displays using 4-pin...
Index: SEE-14994
Index: SEE-14994
Capacitive touch sensor based on the module TTP223-b is supplied with the voltage from 2 V to 5.5 V, the output is a digital signal.
Index: SEE-04431
Index: SEE-04431
Grove - Shield for Seeeduino XIAO - Seeedstudio 103020312
Overlay for Seeeduino Xiao , extending the capabilities of pins I / 0. Provides compatibility of the module with Grove series sensors. It has 8 built-in Grove connectors,...
Index: SEE-17041
Index: SEE-17041
Module from the Grove series, based on the LM386 system and electret microphone. It can be powered with any voltage from 4 V to 12 V. The output is an analog signal. The sensor...
Index: SEE-11350
Index: SEE-11350
Grove - push button with backlight - yellow
Module from the Grove is equipped with a button with a yellow led. It is powered with the v oltage from 3.3 V to 5 V. It has the Grove connector that allows for the direct...
Index: SEE-12596
Index: SEE-12596
The Grove module is used to atomize water. It works with a voltage of 5 V. It can be used, among other things, as a humidifier but also allows for more advanced projects where...
Index: SEE-11362
Index: SEE-11362