- New
- New
- Reduced price
- Pack
- Sale
Power supply microUSB Akyga AK-TB-06 5V/2,5A Raspberry Pi 3/2/B+
Index: ZAS-07689
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 143
Loading...
Aluminum, lightweight (1.3 g) mounts for Sharp distance sensors GP2Y0A02, GP2Y0A21 and GP2Y0A41. Mounts are equipped with mounting holes for M3 screws. Price includes set of 2...
Index: PLL-07985
Index: PLL-07985
MIDI KIT - Shield dla Arduino - SparkFun DEV-12898
Module to connect the Arduino via MIDI Protocol. This interface is used to exchange information with synthesizers, sequencers and other popular music devices.
Index: SPF-08062
Index: SPF-08062
- Sale
- SPECIAL OFFERS
Particle Sensor Breakout - MAX30101 - SparkFun SEN-16474
The sensor is based on a system MAX30101 and allows for the determination of the distance, pulse, smoke, and even blinking of an eye. It has 3 LEDs and a very responsive...
Index: SPF-08065
Index: SPF-08065
- Sale
- SPECIAL OFFERS
The device allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm.
Index: MOD-08073
Index: MOD-08073
Plug WT-16 - with earthing - white
The angled plug for mounting on the cable. It has the ground.
Index: KAB-08137
Index: KAB-08137
Insulated PVC Coated 30AWG Wire Wrapping Wires Reel 1000Ft - blue
PVC cable wrapped on a roll. Used e.g. for alarm and intercom systems. Length equal to 250m. Blue color.
Index: KAB-08151
Index: KAB-08151
10-segment LED Bar Display DC-10YWA - yellow
10-segment LED display 10 x yellow. It can be used for example as a temperature gauge or liquid level.
Index: LED-08166
Index: LED-08166
- Sale
- SPECIAL OFFERS
Adapter SSOP to DIP 16-pin - 2pcs - SparkFun BOB-13994
Adapter enables the connection of the chips in SMD SSOP 20 cases to threaded output holes of DIP 16 pin. It also allows you to connect circuits to a breadboard or connect with...
Index: SPF-08217
Index: SPF-08217
L298N Dual H Bridge DC StepperMotor Driver Board - Iduino ST1112
L298N dual channel DC motor controller module. It is powered from 5 V to 46 V. The maximum channel current is 2 A. The chip has a built-in 5 V voltage regulator to supply the...
Index: MOD-08227
Index: MOD-08227
Laser diode 5mW red 650nm 5V - module Iduino ST1172
Module with diode laser emitting light in red. Power equal to 5 MW. Voltage supply 5 V.
Index: MOD-08242
Index: MOD-08242
A set of 200 resistors with the 1 W power. Elements are in the through hole THT case.
Index: PAS-08282
Index: PAS-08282
DFRobot Gravity: Analog 20A Current Sensor
Current sensor operating in the range up to 20 A and up to 311 Volts on the basis of the Hall effect. The output is an analog voltage. The supply voltage is 5 V.
Index: DFR-08367
Index: DFR-08367
Angled DC adapter 5.5/2.1mm - angular
The angled adapter making possible the connection of the cable to the 5.5 / 2.1 mm tip everywhere, where the straight adapter just doesn't fit. It can be used as a power source...
Index: SWT-08431
Index: SWT-08431
ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier STEMMA QT/Qwiic- Adafruit 1085
Module with analog to digital converter with 16-bit precision. Running at a speed of up to 860 samples per second. It has the ability to change the amplification of up to 16 x....
Index: ADA-08444
Index: ADA-08444
The module is equipped with relay SRD-5VDC-SL-C with coil powered with a voltage of 5 V. T he systems allows you to control actuators with microcontroller ports or with any...
Index: MOD-08463
Index: MOD-08463
2-pin straight connector for soldering to PCB. Used for example to connect male wires. Raster is equal to 2.54 mm. Socket is sold in pack of 10 pieces.
Index: UCC-08501
Index: UCC-08501
3-pin connector, easy to solder onto the PCB. It is used, for example, for connecting the male wires. Pitch is equal to 2.54 mm.
Index: UCC-08502
Index: UCC-08502
Socket 1x16pin - 2,54mm - 10pcs
16-pin connector, easy to solder onto the PCB. It is used, for example, for connecting the male wires. Pitch is equal to 2.54 mm. Items are sold in sets of 5 pieces.
Index: UCC-08504
Index: UCC-08504
Socket 1x20pin - 2,54mm long - 5pcs.
20-pin straight connector for soldering to PCB. Used for example to connect male wires. Raster is 2.54 mm. It has extended pins length of 10.5 mm. Price per 5 pcs .
Index: UCC-08512
Index: UCC-08512
Linear voltage regulator 5V L78M05CDT - SMD TO252 - 5pcs.
The stabilizer is used to supply power to logic circuits supplied with 5 V. Maximum output current is 0,5 A. Housing: TO252 (DPAK).
Index: UCC-08556
Index: UCC-08556
DFRobot Gravity: Formaldehyde (HCHO) Sensor (Arduino & Raspberry Pi Compatible)
The sensor measures the air clarity, depending on the content of formaldehyde. It is characterized by its high stability and sensitivity and long service life. It works with...
Index: DFR-08605
Index: DFR-08605
RGB LED Strip WS2813 - digital, addressed - 14 LED/m, 43.2W/m, 5V - 1m, IP30
Individually addressed RGB LEDs placed on a 1 m panel with a density of 144 LEDs per meter. Each pixel can emit a color from 24-bit palette.
Index: LED-08737
Index: LED-08737
Pixel Boost module - 3.3V / 5V voltage buffer for WS2812B diodes
The module is used to control the WS2812B LEDs, in the case of a microcontroller running on voltage 3.3 V. It includes a buffer that allows you to convert voltages. Module...
Index: MSX-08790
Index: MSX-08790
ON-OFF-ON KN3 (B) -123 250V / 6A toggle switch - monostable
Switch with lever for printing with 3 contact with the load of 6 A / 250 V or 10 A / 125 V. It has 3 positions in configuration ON-OFF-ON. Pins pitch is 12.5 mm, total...
Index: NSZ-08827
Index: NSZ-08827