ELECTRONICS - Strona 12
Set of cables male plug with hooks - 2 pcs.
Set of 2 wires: black and red with the length of 25 cm , ended on the one side with the male plug , on the other, with the hook .Peltier cell TEC1-12704 12V / 4A
The cooling cell applied, for example, in portable refrigerators. It is supplied with the voltage up to 12 V, it consumes up to 4 A of current. Board sizes - 40 x 40 x 4 mm.ON-OFF bistable switch 12mm - 5A/250V - round - black
Round switch, bistable, black. Contact rating 5 A at 250 V or 8 A at 125 V .DIY HDMI adapter - straight - Waveshare 14474
DIY HDMI adapter from Waveshare designed to build cables that allow you to transmit audio and video data. The adapter has a socket for the FFC cable and a male HDMI plug to...Flipper Zero Wifi Devboard - WiFi
Flipper Zero Wifi Devboard is a module that extends the capabilities of the Flipper Zero device with WiFi communication. It is based on the popular ESP32-S2 system, with...Jack 3,5mm stereo female jack - JY039-5P
Jack female 3.5 mm stereo socket. It has pins for the through-hole soldering (THT) on the PCB.Plug DC 5,5/2,1mm with cable 1,5m - 24AWG
2-vein cable, 1 m long with straight plug DC 5,5 / 2,1 mm.Gravity - I2C/UART connection cable set - PH2.0-male - 30cm - 5pcs - DFRobot FIT0916-M
The kit includes 5 pieces of 30 cm long connection cables from DFRobot. On one side they are terminated with a female PH2.0 connector compatible with the Gravity standard,...Splitter Wire for Servos Y - 15 cm (JR)
Wire splitter for servos with length of 15 cm. The wire allows you to connect two servos to one input of the controller.Slide switch SS22T25 2-position - 5pcs
Slide switch, straight, to print with the size of 9 x 3.5 x 3.5 mm. Pins pitch: 2.5 mm. Items are sold in sets of 5 pieces.Module with microUSB socket - soldered connectors
The module with a socket enables connection of the plug microUSB to any arrangement. The exit raster 2,54 mm is compatible with standard contact plates and connection...Temperature sensor TMP36GT9Z - analog THT
Analog thermometer, in which the output voltage is proportional to the measured temperature from the range: -40 °C to +120 °C. It is powered with the voltage from 2.7 to 5.5 V.Goldpin 2x20 straight raster 2.54mm
Male goldpin strip with 2 x 20 pins. Raster is 2.54 mm in length and 2.54 mm in width - between the two strips. It works with Raspberry Pi Zero among others.Mini Tamiya connector - set (plug socket)
Power connector, type mini Tamiya - kit includes slot and plug.Phototransistor TEPT4400 3mm 570nm
Phototransistor in the case of 3 mm. Maximum sensitivity for the wave with the length of 570 nm. The reading angle is 60 °. T ransparent lens.Waterproof probe with LM35DZ - 1m analog temperature sensor
Waterproof probe is equipped with an analog thermometer DS18B20 with a cable with the length of 1 meter.Infrared receiver module 1838 - 38kHz - Iduino ST1089
Module with IR receiver, operating at a frequency of 38 kHz. The module is powered with the voltage from 2.7 V to 5.5 V. It detects an angle of up to 90 °. Maximum detection...L298N - two-channel motor controller - 12V/2A
Module with dual-channel driver for DC motors L298. It is supplied with the voltage up to 12 V. Maximum current per channel is 2 A. The system has embedded voltage regulator 5...Ceramic condenser 1,5nF/50V THT - 10pcs
Through hole ceramic capacitor of 1,5 nF / 50 V. The price for 10 pieces.Infrared receiver TSOP31236 - 36kHz
TSOP31236 infrared receiver, operating at 36 kHz with a voltage from 2.7 V to 5.5 V.
