Heatsink with fan - for Odyssey-X86J4105 - Seeedstudio 114070141
Index: SEE-18808
- Reduced price
- Sale
ELECTRONICS - Strona 20
Loading...
Photoresistor 10-20kΩ GL5528 - 10pcs.
Photoresistor GL5528 with the resistance of 10 to 20 kΩ, 100 mW of power and a size of 5x2 mm. Price for 10 pieces.
Index: SES-04598
Index: SES-04598
Bridge rectifier KBPC1510 - 1000V/15A - with connectors
Rectifying bridge, maximum operating voltage 1000 V, current up to 15 A . It has connectors in the form of terminals.
Index: PAS-05222
Index: PAS-05222
Signal lamp popular in door automation. The device is striking in an instant and provides a high level of safety.
Index: LED-06125
Index: LED-06125
Strip LED SMD2835 IP20 9,6W, 120 LED/m, 8mm, cold white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 9.6 W/m, density of 120 diodes per meter. The color of the light is cold white. Protection...
Index: LED-07090
Index: LED-07090
ON-OFF switch monostable - flat - blue - 12V
Flat monostable switch with the blue backlight .
Index: DNG-10942
Index: DNG-10942
Grove - LM358 Ambient Light Sensor v1.2
Module from the Grove series is equipped with a sensor LM358. The sensor allows to determine the intensity of the light and reflects the analog voltage signal back to Arduino....
Index: SEE-11330
Index: SEE-11330
Step-Down Voltage Regulator - adjustable 3,3V - 25V 5A - DFRobot DFR0205
Inverter module for converting input voltage from 3.6 V to 25 V, to output voltage from 3.3 V to 25 V. The current capacity for 5 V is 5 A. The input voltage must be higher...
Index: DFR-15090
Index: DFR-15090
Xiao ESP32-S3 + Wio-SX1262 kit for Meshtastic and LoRa/LoRaWAN - Seeedstudio 102010611
The Xiao ESP32-S3 and Wio-SX1262 LoRa module kit is an advanced yet compact solution for projects requiring long-range wireless communication. It is compatible with the Arduino...
Index: SEE-25675
Index: SEE-25675
IR transmitter TSAL6400 5mm 940nm - 5pcs
The led that emits light with a wavelength of 940 nm, in DIP 5mm case. Price for 5 pcs of the led.
Index: UCC-01059
Index: UCC-01059
Quartz resonator 3,579545MHz - HC49- low - 10pcs.
The quartz resonator in the small through hole case.
Index: PAS-01889
Index: PAS-01889
IR Power LED Star 1W - infrared 940nm with heat sink
IR Power LED with power of 1 watt and with a heat sink. Emits light of the infrared range with a wavelength of 940 nm.
Index: LED-02701
Index: LED-02701
Zener diode 0,5W 5,1V - 10 pieces
Zener diode with power of 0.5 V and a voltage of 5.1 V. The set includes 10 pieces.
Index: PAS-04955
Index: PAS-04955
Eight-segment display x1 - 14mm green - common cathode
A single 8-segment display allows the display of a digit along with a period and some letters.
Index: LCD-07288
Index: LCD-07288
ProtoBoard - prototyping board 572-poles - single sided - DFRobot FIT0099
Single-sided prototype plate with dimensions of 78 x 58 mm. It is equipped with 572 fields - 22 x 26, with a 2.54 mm grid and 4 mounting holes of 3 mm diameter. Ideal for quick...
Index: DFR-15088
Index: DFR-15088
JustPi THT CF carbon resistor 1/4W 1MΩ - 30pcs.
A set of 30 resistors. The electronic elements are designed for THT through-hole mounting. Resistance is 1 MΩ and tolerance is 5%.
Index: JUS-20017
Index: JUS-20017
LED 5mm 12V with resistor and wire - bicolor red/green - common cathode - 5pcs.
The 5mm light em itting diode (LED) glows red or green . It has an attached resistor and 3 wires of 18 cm length. It is powered by 12 V DC. LEDs are produced in different...
Index: DNG-20107
Index: DNG-20107
Heat shrink tube 1.6/0.8 black - 10pcs
Diameter before heat shrink: 1.6 mm, diameter after heat shrink: 0.8 mm. Price for 10 x 1 meter.
Index: NSZ-00089
Index: NSZ-00089
Quartz resonator 16MHz - UC49 - SMD - low - 10pcs
The quartz resonator in a small case for surface mounting (SMD).
Index: PAS-00308
Index: PAS-00308
Tact Switch 6x6mm/13mm DIP - 5pcs.
A small monostable button mounted in a through-hole way - THT with two pins with the size: 6x6 mm, height: 13 mm. The price is for 5 pieces.
Index: SWT-00380
Index: SWT-00380
Adapter for the ESP-12E ESP8266 WiFi module
The adapter facilitates the installation of the ESP-12 module on the breadboard. This set includes the goldpin connectors, 2.54 mm pitch for self-soldering.
Index: MOD-04351
Index: MOD-04351
The 3-pin plug for printing, the pitch is 2.54 mm. The set includes 5 x 3-pin plugs.
Index: KAB-06775
Index: KAB-06775
Module with addressed RGB LED WS2812
Module with digital addressed diode RGB WS2812 with outputs with the raster of 2.54 mm, for mounting of goldpin connectors (included). It allows you to get any color with a...
Index: MOD-06904
Index: MOD-06904
The holding electromagnet is powered by 24 V with a power of 2.5 W. It holds a mass of 3 kg at a standard acceleration due to gravity of 9.8 m/s 2 . The body diameter is 20...
Index: MOD-07027
Index: MOD-07027
GPS antenna with SMA connector, magnetic mount 3V-5V
GPS antenna with SMA connector, attached on the magnets. Supply voltage from 3 V to 5 V.
Index: AKS-10126
Index: AKS-10126