- New
DRV8256E - single-channel motor controller 48V/1,9A - Pololu 4038
Index: PLL-20441
- Reduced price
- Promotion
SENSORS - Strona 19
Loading...
DFRobot Gravity - BME280 humidity, temperature and pressure sensor 110kPa I2C / SPI 3-5V
The DFRobot module is equipped with a sensor of humidity, temperature and pressure, powered with the voltage from 3.3 V to 5 V with the I2C and SPI interface. Measuring range:...
Index: DFR-09384
Index: DFR-09384
Vibration sensor - Iduino SE053
A simple vibration sensor with digital output. It is powered with the voltage of 5 V. It has a 3-pin connector.
Index: OST-14324
Index: OST-14324
Dust / air quality sensor PM2,5 - 5V UART - PlanTower PMS9103M
The dust sensor module allows you to determine the air quality . It measures the concentration of PM2.5 particles and detects particles with a diameter of 0.3 μm, such as...
Index: PLA-17768
Index: PLA-17768
Touch button AT42QT1010 - SparkFun module SEN-12041
A module made by SparkFun with a capacitive touch button based on AT42QT1010 system. It is powered with the voltage in the range from 1.8 V to 5 V. It has a digital output...
Index: SPF-03291
Index: SPF-03291
DFRobot Gravity: Analog Heart Rate Monitor Sensor (ECG) For Arduino
Module for measuring heart rate of the human heart, compatible with Arduino. It works with voltage from 3.3 V to 6 V, the output is the analog signal. The kit includes a probe,...
Index: DFR-07436
Index: DFR-07436
9-DOF Accel/Mag/Gyro+Temp Breakout Board - LSM9DS1 - Adafruit 3387
The sensor is a combination of 3-axis digital gyroscope, accelerometer and compass. It allows you to measure acceleration, magnetic field and angular velocity in the...
Index: ADA-08441
Index: ADA-08441
DFRobot Gravity - adapter with compression connectors
Universal adapter for sensors with 3-pin clamp connector. It can be used with digital and analog modules. The module has a built-in resistor of 10K between AB and AC, which...
Index: DFR-11286
Index: DFR-11286
AM2301 temperature sensor for the Sonoff TH16 device
The temperature sensor designed to operate with Sonoff TH16 intelligent Wi-Fi controller. It enables to turn devices on / off by controlling the temperature or humidity.
Index: DNG-10160
Index: DNG-10160
Grove - temperature and humidity sensor DHT22 (AM2302)
Module with temperature and humidity sensor with a digital single-wire interface. Measuring range: temperature -40 °C to +80 °C, humidity is from 0% to 100 % RH.
Index: SEE-13334
Index: SEE-13334
Grove Inventor Kit for micro:bit
The Grove Inventor Kit for micro: bit provides endless possibilities for development boards from BBC. The most important element of the set is a Grove shield for micro: bit...
Index: SEE-13819
Index: SEE-13819
Eura-tech EL Home MD-11B7 - outdoor motion detector PIR 230V - black
Photo-optical sensor providing motion detection, designed for installation outdoors. It is used to automatically turn on the lights and other devices. It can be attached to a...
Index: EUR-14037
Index: EUR-14037
- On sale!
Oxygen Sensor I2C - DFRobot SEN0322
Sensor designed for measuring O2 concentration in the environment. The DFRobot product is compatible with 3.3 V and 5 V controllers such as Arduino, ESP32 or Raspberry...
Index: DFR-17378
Index: DFR-17378
A set of ultrasonic sensors, round, with a diameter of 16 mm.
Index: SES-01209
Index: SES-01209
DFRobot Gravity - digital crash sensor (left)
The module is equipped with limit switch with lever with roller is designed for Arduino. It is supplied with the voltage of 5 V.
Index: DFR-11265
Index: DFR-11265
Grove - water level sensor - 10cm - Seeedstudio 101020635
Sensor to measure the water level in a vessel up to 10 cm using the Arduino module. The measurement is made by volume . The tile is equipped with a Grove connector, for...
Index: SEE-16346
Index: SEE-16346
Grove - 10kΩ linear sliding potentiometer
Sliding linear potentiometer with a resistance of 10 ohms. Itas a 4-pin Grove connector. The kit includes a cable adapted to Seeedstudio Base Shield v2.0.
Index: SEE-04436
Index: SEE-04436
Analog voltmeter - panel 91C16 mini - 250V DC
Analog voltmeter capable of measuring voltage up to 250 V. It has a square case in size 40 x 40 mm. Yhe accuracy CLASS 5.0.
Index: UPM-09925
Index: UPM-09925
Distance sensor, reflective VMA330 - 3,3V/5V - 40cm
The reflective module with IR sensor equipped with digital output. It works with a voltage from 3.3 V to 5 V. The detection of obstacles is in the range of 2 to approx. 40 cm....
Index: VEL-13899
Index: VEL-13899
BleBox humiditySensor v2 - WiFi temperature and humidity sensor
BleBox humiditySensor v2 is a small sensor that communicates via a local WiFi network, allowing you to measure relative humidity and air temperature . Thanks to the wBox...
Index: BOX-22885
Index: BOX-22885
6-axis motion sensor - accelerometer and gyroscope - DFRobot SEN0386
Powerful 6-axis sensor combines accelerometer and gyroscope. Allows you to determine the position of an object in space , measure the acceleration and angular velocity....
Index: DFR-19014
Index: DFR-19014
Grove - BME280 - humidity, temperature and pressure sensor 110kPa I2C 3-5V
The Grove module is equipped with a humidity, temperature and pressure sensor powered with the voltage of 3.3 V to 5 V with I2C and SPI interface. Measuring range: temperature:...
Index: SEE-11355
Index: SEE-11355
IR receiver + wire - Iduino SE027
Simple Iduino module with IR receiver, operating at a frequency of 38 kHz. The module is powered with the voltage of 5 V. It detects a beam at an angle of 90°. Maximum...
Index: OST-14283
Index: OST-14283
High temperatura probe PT100 - 7x50mm
Waterproof analogue sensor with the high temperature working in the range from -200 °C to 420 °C. The output is resistance dependent on temperature. Probe length is 50 mm.
Index: SES-07468
Index: SES-07468
Inductive proximity sensor LJ12A3-2-Z / BX 2mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of up to 2 mm. The object detection...
Index: DNG-11862
Index: DNG-11862