- New
X-NUCLEO-NFC07A1 - NFC/RFID Tag - expansion board for STM32 Nucleo
Index: MAS-22852
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
SENSORS - Strona 20
Loading...
Grove - LS06-S ambient light sensor v1.1
Module from the Grove series is equipped with a sensor LS06-S. The s ensor allows to determine the intensity of the light and reflects the analog voltage signal back to...
Index: SEE-13335
Index: SEE-13335
Hit sensor, the signal of which, after a collision with some object, goes into high status. It works with the voltage of 5 V. The board has 3-pin connector.
Index: OST-14278
Index: OST-14278
Trim with QTR-3A reflective sensors - analog - Pololu 2456
Compact bar with three reflective sensors with the size of 32 x 8 mm. It has analog outputs, it is powered with the voltage of 5 V.
Index: PLL-01730
Index: PLL-01730
High temperatura probe PT100 - 7x50mm
Waterproof analogue sensor with the high temperature working in the range from -200 °C to 420 °C. The output is resistance dependent on temperature. Probe length is 50 mm.
Index: SES-07468
Index: SES-07468
Distance sensor, reflective VMA330 - 3,3V/5V - 40cm
The reflective module with IR sensor equipped with digital output. It works with a voltage from 3.3 V to 5 V. The detection of obstacles is in the range of 2 to approx. 40 cm....
Index: VEL-13899
Index: VEL-13899
PIR motion detector - 10m - 220V
Motion detector using infrared technology. It detects motion from 0.5 m to 10 m and is used for indoor object detection in alarm and lighting systems. It provides a wide...
Index: DNG-18405
Index: DNG-18405
Digital temperature and humidity sensor DHT11 - Waveshare 9535
DTH11 digital temperature and humidity sensor module from Waveshare. It enables temperature measurement from 0°C to 50°C with measurement accuracy of ± 2°C and ambient...
Index: WSR-17383
Index: WSR-17383
Grove - module cover 1x1 blue - 4pcs.
Shield for the modules from Grove series in blue color with size of 25 x 25 x 13 mm. It is also compatible with Lego and Makeblock. It allows you to mount a small Grove module....
Index: SEE-13339
Index: SEE-13339
Grove - Sensor for measuring EMG muscle activity
Module from the Grove series that allows you to collect the bioelectric signal generated by the human muscles (EMG). The output is an analog signal that can be read using any...
Index: SEE-11308
Index: SEE-11308
Grove - vibration sensor with piezoelectric membrane
Vibration sensor with flexible plastic piezoelectric sensor LDT0-028. It is supplied with 5V, works with modules from Arduino, Raspberry Pi and other...
Index: SEE-11342
Index: SEE-11342
Grove - 6-axis accelerometer and gyroscope LSM6DS3 - Seeedstudio 105020012
The module is equipped with a 6-axis accelerometer and a gyroscope based on the LSM6DS3 system with a built-in power regulator. It allows to measure 6 sizes: acceleration X,...
Index: SEE-15559
Index: SEE-15559
Gravity - AHT20 temperature and humidity sensor - DFRobot SEN0528
The Gravity series module is equipped with the AHT20 system enabling precise measurement of air temperature and humidity. It has a modern, semiconductor, capacitive humidity...
Index: DFR-21921
Index: DFR-21921
QRE1113 - analog reflectance sensor - SparkFun ROB-09453
Analog sensor that has capability of detecting the line. Detects light reflected from the surface and on its basis determines the color of the surface. The module has an analog...
Index: SPF-07684
Index: SPF-07684
Grove - ADC converter for HX711 load cell sensors - Seeedstudio 101020712
Arduino compatible 24-bit ADC converter module allows to read values from pressure sensors. It has built-in amplifier with optional 32 dB, 64 dB and 128 dB gain. On the board...
Index: SEE-15855
Index: SEE-15855
The control module from a Grove series. It has a built-in tact-switch system and pull-down resistor. It communicates with the microcontroller through a digital signal.
Index: SEE-13344
Index: SEE-13344
DFRobot Gravity - 5.4kΩ slide potentiometer
Slide linear potentiometer with the resistance of 5.4 kΩ. It is equipped with two 3-pin connectors that enable the direct connection of the module to the development board IO...
Index: DFR-11258
Index: DFR-11258
Light intensity sensor BH1750 - STEMMA QT/Qwiic - Adafruit 4681
Light intensity sensor with BH1750 chip manufactured by Adafruit. 16-bit , efficient and with low power consumption. Can be used to work in different lighting conditions....
Index: ADA-17725
Index: ADA-17725
LSM6DSO32 6DoF IMU - 3-axis accelerometer and gyroscope - Adafruit 4692
The 6DoF LSM6DSO32 is a module of the Adafruit 3-axis accelerometer and 3-axis gyroscope . It is used to measure linear acceleration within ± 4 / ± 8 / ± 16 / ± 32...
Index: ADA-18232
Index: ADA-18232
Gravity - I2C/UART connection cable set - PH2.0-female - 30cm - 5pcs - DFRobot FIT0916-F
The kit includes 5 pieces of 30 cm long connection cables from DFRobot. On one side they are terminated with a female PH2.0 connector compliant with the Gravity standard,...
Index: DFR-22467
Index: DFR-22467
Magnetic Encoder Pair Kit for 20D mm Metal Gearmotors, 20 CPR, 2.7-18V - Pololu 3499
A pair of magnetic quadrature sensors, designed for installation in 20D motors from Pololu. It consists of a board with the Hall sensor and the plastic impeller with magnets,...
Index: PLL-08258
Index: PLL-08258
Fermion - carbon monoxide CO sensor - MEMS - 5-5000ppm - DFRobot SEN0564
A sensor from DFRobot that detects the concentration of carbon monoxide CO in a room. The module uses MEMS technology, which not only allows for obtaining highly precise...
Index: DFR-23737
Index: DFR-23737
Rotation sensor, encoder - 1024 P/R - SparkFun COM-11102
The encoder generates a signal in Gray code which you can interpret using a microcontroller and read the direction and speed of a rotating shaft. The resolution is 1024 pulses...
Index: SPF-11192
Index: SPF-11192
Grove - digital PIR motion sensor - Seeedstudio 101020793
PIR sensor for motion detection using IR diodes. It allows to generate low or high state at the output. It does not require Arduino library for proper operation. It detects...
Index: SEE-16909
Index: SEE-16909
DFRobot Gravity - Hall magnetic field sensor
The magnetic field sensor with digital output OH9249. It is supplied with the voltage of from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04714
Index: DFR-04714