An interface is a contact or connector, a device that allows you to connect two elements together. Without the interface such connections could not function and thus it would be impossible to expand many electronic devices and advanced systems. An interface is also called a set of displays and manipulators, which include various types of buttons and knobs. It is through them that the device/chip communicates with the user and vice versa. Thus, the interfaces are in different forms and thus versatile and widely used. The offer of Botland includes all elements necessary to build electronic interfaces. Among them are level translators, digital line expanders and communication systems. All solutions offered by us are characterized by efficiency and reliability of work. They have a long life and are adapted to work under a heavy load, which is characterized today by many technologically advanced systems. So check our offer by comparing individual interface models.
- New
- On sale!
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Engraving laser 3D/CNC - PLH3D-XT-10 - 12-24V/0,5W - Opt Lasers
Index: OPT-23496
- Reduced price
- Promotion
Interfaces
Products: 13
Loading...
Converter MAX232N - THT - 5pcs
The circuit is used to convert the voltage port RS-232 to TTL standard. Set of 5 pcs chips.
Index: UCC-00082
Index: UCC-00082
DFRobot Gravity converter prądowo current-voltage 0-25/0,3V
Module from the Gravity series enables the processing of the current signal from 0 mA to 25 mA into a voltage signal from 0 V to 3V. The sensor may be connected to the...
Index: DFR-12471
Index: DFR-12471
MAX485 transceiver RS485 - DIP - 5pcs.
A circuit used to convert RS-485 port voltage to TTL standard. The circuit is in DIP8 chrono housing.
Index: UCC-07693
Index: UCC-07693
Real-time clock that allows to read time in hours, minutes, and seconds, date: month, day, year. The communication interface is I2C bus, THT case DIP8.
Index: UCC-02764
Index: UCC-02764
Pamięć EEPROM 1kb I2C 24LC01B-I/P - 5pcs.
The system allows to increase the EEPROM memory of the microcontroller with 1 KB. The memory is divided to 128 of 8-bit blocks. It communicates with the central unit via the...
Index: UCC-04744
Index: UCC-04744
PCF8574 - GPIO expander I2C 8-bit
The system allows to increase the number of devices connected to the I2C bus with 8 pieces. The system has 16 pins.
Index: UCC-04921
Index: UCC-04921
MCP23018-E/SP - 16-Bit I/O Expander with Open-Drain Outputs
The system allows to increase the number of pins (up to 16) of the microcontroller (including minicomputer Raspberry Pi). It communicates with the central unit via the I2C bus...
Index: UCC-06506
Index: UCC-06506
MCP23S08-E/P - GPIO expander SPI 8-channel
The chip allows to increase the number of pins (up to 8) of a microcontroller (including Raspberry Pi minicomputer). It communicates with the CPU via the SPI bus.
Index: UCC-04589
Index: UCC-04589
MCP23008-E/P - 8-channel I2C pin expander
The system allows to increase the number of pins (up to 8) of a microcontroller (including minicomputer Raspberry Pi). It communicates with the central unit via the I2C bus...
Index: UCC-06505
Index: UCC-06505
325 mW audio amplifier in DIP8 enclosure. It has one channel, operates with voltage from 4 V to 12 V. Includes 5 pieces of circuits.
Index: UCC-06099
Index: UCC-06099
1kb I2C EEPROM memory - 24AA01-I/P
The system allows to increase the EEPROM memory of the microcontroller with 1 KB. The memory is divided to 128 of 8-bit blocks. It c ommunicates with the central unit via the...
Index: UCC-04588
Index: UCC-04588
MCP23017 - I2C 16-channel output expander
The system allows to increase the number of pins (up to 16 ) of the microcontroller (including minicomputer of Raspberry Pi). It communicates with the central unit via the I2C...
Index: UCC-02556
Index: UCC-02556
PCF8574N - GPIO expander board for microcontroller
The system allows to increase the number of IOs (up to 8) of a microcontroller (e.g. Arduino module). Communicates with the central unit via the I2C bus (TWI).
Index: UCC-01210
Index: UCC-01210
See also
Digital transmission with different voltages
The offer includes voltage level translators. For all digital transmission standards we deal with different voltage levels. They are assigned two digital states, namely low and high. The voltage around the power supply voltage, which is higher, is called the high state voltage. The low state voltage refers to the voltage located around the ground potential. There are situations when low and high state are coded by the difference of voltages. So it is different than in case of direct voltage coding. The voltage level translator is used in the cell where different standards of digital data transmission are connected together. They take the form of integrated circuits.
Communication interface controllers
In order to connect different communication interfaces with each other, choose one of our proposed communication interface converters, which are available in Botland store in different variants. Among many proposals you will find popular controllers of communication interfaces Wi-Fi and Ethernet. This is one of the most popular solutions and the most frequently chosen options. They allow you to connect, among others, to a computer or microcomputer using a serial interface (examples are I2C and SPI). The minicomputer system is not equipped with Internet access as standard. However, using a communication interface converter we can connect it via Ethernet or Wi-Fi cable.
For systems without digital lines
Layout designs differ in their functionality and the elements they contain. It may happen that there are no digital lines in them. Among them there are lines, which are responsible for controlling a large number of LEDs. In many cases it is necessary to use a large number of buttons, without which the circuit would not be functional enough. To make this possible, digital interface expanders are used. These are elements that have a digital serial interface on one side, while on the other side there is usually an 8- or 16-bit parallel interface. The use of expanders is therefore of great importance for expanding systems and supplementing them with new functionalities for digital lines.
We constantly supplement our offer with new products. Currently you can find in our store, among other things, a chip that allows to increase the EEPROM memory of a microcontroller by 1 KB, a chip that allows to increase the number of pins up to 8 microcontroller, 325 mW audio amplifier in DIP8 chassis, a module that allows to convert a current signal from 0 mA to 25 mA to a voltage signal from 0 V to 3V and many other solutions with communication ranges between devices, systems and chips. Our experts are at your disposal at all times. If you do not know which interface to choose, we will give you valuable tips and point out a specific solution. Feel free to contact us, buy and explore our offer more closely.