N20-BT06 micro 75:1 400RPM - 12V motor
N20-BT06 micro 75:1 400RPM - 12V motor
N20-BT06 micro 75:1 400RPM - 12V motor
N20-BT06 micro 75:1 400RPM - 12V motor
N20-BT06 micro 75:1 400RPM - 12V motor
N20-BT06 micro 75:1 400RPM - 12V motor
N20-BT06 micro 75:1 400RPM - 12V motor
N20-BT06 micro 75:1 400RPM - 12V motor
N20-BT06 micro 75:1 400RPM - 12V motor
N20-BT06 micro 75:1 400RPM - 12V motor
N20-BT06 micro 75:1 400RPM - 12V motor
N20-BT06 micro 75:1 400RPM - 12V motor - zdjęcie 1
N20-BT06 micro 75:1 400RPM - 12V motor - zdjęcie 2
N20-BT06 micro 75:1 400RPM - 12V motor - zdjęcie 3
N20-BT06 micro 75:1 400RPM - 12V motor - zdjęcie 4
N20-BT06 micro 75:1 400RPM - 12V motor - zdjęcie 5
N20-BT06 micro 75:1 400RPM - 12V motor - zdjęcie 6
N20-BT06 micro 75:1 400RPM - 12V motor - zdjęcie 7
N20-BT06 micro 75:1 400RPM - 12V motor - zdjęcie 8
N20-BT06 micro 75:1 400RPM - 12V motor - zdjęcie 9
N20-BT06 micro 75:1 400RPM - 12V motor - zdjęcie 10
N20-BT06 micro 75:1 400RPM - 12V motor - zdjęcie 11

Micro motor N20-BT06 75:1 400RPM - 12V

Index: DNG-12546 EAN: 5904422319557
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com

The N20 series miniature motor with 75:1 gearing, has 400 RPM, torque is equal to 1.6 kg*cm (0.157 Nm). The supply voltage is from 3 V to 12 V.

PLN16.22
PLN16.22 tax excl.

Available, 24 hours shipping!
(Check quantity)
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: N20 Motors

Specification

Power supply voltage:

3 V - 12 V

Non load current (12 V):

70 mA

Speed without load (12 V):

400 rpm

Torque (12 V):

1.6 kg*cm (0.157 Nm)

Gear ratio:

75:1

Shaft diameter:

3 mm

Body dimensions:

24 x 10 x 12 mm

The weight:

10 g

Two-sided shaft:

NO

Description

The small, lightweight yet powerful N20 series engines, compatible with Polol's engines, are used as drive units by robot constructors. The units can be powered up to 12 volts (depending on the model), with a power output of over 3 volts. The optimum voltage at which the power to strength ratio is best is 6 V.

Silnik N20

Motor dimensions

The motor body is a 24 x 10 x 12 mm cuboid. The gearbox is 9,27 mm long. There is a 3 mm D-shaped shaft at the output. Total weight is about 10 g.

The drawing shows the dimensions of the micro motor with the gearbox.

Accessories

The N20 motors are compatible with Polol motor accessories.

Silnik N20

  • Wheels, crawlers,hubs:Wealso offer wheels and crawlers, matching Pololmicroengine shafts. Installation of non-standard wheels is facilitated by adapters.


Silnik N20

Silnik N20

Attention!

N20 motors are not compatible with micro Polol motor encoders.

Diameter 12 mm
Length 24 mm
Voltage to 3.0 V
Voltage from 12.0 V
Motor - current 100 mA
Motor - gear 75:1
Rotation speed 400 obr/min
Torque 1,6 kg*cm
Mass 10 g
Motor - shaft 3 mm

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

TB6612FNG - two-channel motor controller 13.5V / 1A - Pololu 713

Polol module with a two-channel direct current motor controller. It is powered from 4.5 V to 13.5 V. Continuous current per channel is 1 A, with both channels connected the...
Index: PLL-00032
Index: PLL-00032
Available, 24h shipping!
(Check quantity)
Regular price PLN13.41 Price PLN13.41

Micro motor N20-BT03 10:1 3000RPM - 12V

N20 series miniature motor with 10:1 gearing, has 3000 rpm , torque is 0.3 kg*cm (0.029 Nm). The supply voltage is from 3V to 12V.
Index: DNG-12543
Index: DNG-12543
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT42 75:1 170RPM - 6V

The N20 series miniature motor with 75:1 gearing, has 170 RPM, torque is 0.6 kg*cm (0.059 Nm). The supply voltage is 6 volts.
Index: DNG-12604
Index: DNG-12604
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT22 100:1 120RPM - 9V

The N20 series miniature motor with 100:1 gearing, has 120 RPM, torque is 0.9 kg*cm (0.088 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12564
Index: DNG-12564
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT01 75:1 220RPM - 6V

N20 series miniature motor with 75:1 gearing, has 220 RPM , torque is 0.8 kg*cm (0.078 Nm). The supply voltage is from 1 V to 6 V.
Index: DNG-12541
Index: DNG-12541
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT38 250:1 120RPM - 9V

The N20 series miniature motor with 250:1 gearing, has 120 RPM, torque is equal to 4.3 kg*cm (0.422 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12599
Index: DNG-12599
Available, 24 hours shipping!
(Check quantity)
Regular price PLN18.62 Price PLN18.62

BD65496MUV - single-channel motor controller 16V/1,2A - Pololu 2960

Single-channel DC motor controller. Continuous current per channel 1.2 A (momentary up to 5.0 A). Supply voltage up to 16 V.
Index: PLL-04238
Index: PLL-04238
Available, 24h shipping!
(Check quantity)
Regular price PLN15.85 Price PLN15.85

Tantalum capacitor 10uF/10V SMD

Capacitance: 10 uF, Voltage: 10 V, Tolerance: 10%, Case: SMD A
Index: PAS-00424
Index: PAS-00424
Unavailable
Regular price PLN0.80 Price PLN0.80

Linear voltage regulator LDO 5V LM1117MP - SMD SOT223

Low-Dropout linear stabilizer. Output voltage: 5 V. Maximum output current: 0.8 A. Housing: SOT-223.
Index: UCC-01117
Index: UCC-01117
Unavailable
Regular price PLN0.73 Price PLN0.73

Potentiometer knob GCL15 black - 6/15mm - 5 pcs.

Knob for rotation potentiometer on axis of 6 mm. The height is 17 mm and an external diameter is 14.5 mm. 5 pcs.
Index: MOD-05732
Index: MOD-05732
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN4.63 Price PLN4.63

Encoder with button - 20 impulse 12mm - EC11 vertical - 5pcs.

Knob in the form of an encoder with a button that allows you to create a simple user interface. The module sends the digital signal to two pins depending on the direction of...
Index: MOD-06903
Index: MOD-06903
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Adapter plug DC 5.5 / 2.1 - plug connector 6F22 battery 9V

Adapter that allows you to connect a popular 9 V 6F22 battery for DC 5.5/2.1 mm connectors used in development sets, for example, Arduino.
Index: AKC-01369
Index: AKC-01369
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN1.54 Price PLN1.54

Products from the same category

Micro motor N20-BT09 298:1 100RPM - 12V

The N20 series miniature motor with 298:1 gearing, has 100 RPM, torque is 5 kg*cm (0.49 Nm). The supply voltage is from 3V to 12V.
Index: DNG-12548
Index: DNG-12548
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT05 50:1 625RPM - 12V

N20 series miniature motor with 50:1 gearing, has 625 RPM, torque is 1.1 kg*cm (0.108 Nm). The supply voltage is from 3V to 12V.
Index: DNG-12545
Index: DNG-12545
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT07 100:1 320RPM - 12V

The N20 series miniature motor with 100:1 gearing, has 320 RPM , torque is 2.2 kg*cm (0.216 Nm). The supply voltage is from 3 V to 12 V.
Index: DNG-12547
Index: DNG-12547
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT01 75:1 220RPM - 6V

N20 series miniature motor with 75:1 gearing, has 220 RPM , torque is 0.8 kg*cm (0.078 Nm). The supply voltage is from 1 V to 6 V.
Index: DNG-12541
Index: DNG-12541
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT24 50:1 625RPM - 9V

The N20 series miniature motor with 50:1 gearing, has 625 RPM, torque is equal to 1.1 kg*cm (0.107 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12566
Index: DNG-12566
Available, 24 hours shipping!
(Check quantity)
Regular price PLN15.45 Price PLN15.45

Micro motor N20-BT43 210:1 100RPM - 6V

The miniature motor of N20 series with 210:1 gearing, has 100 rpm, torque is 2.6 kg*cm (0.255 Nm). The supply voltage is 6 volts.
Index: DNG-12605
Index: DNG-12605
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT39 1000:1 14RPM - 9V

The N20 series miniature motor with 1000:1 gearing, has 14 RPM, torque is equal to 5 kg*cm (0.49 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12600
Index: DNG-12600
Available, 24 hours shipping!
(Check quantity)
Regular price PLN26.83 Price PLN26.83

Micro motor N20-BT34 298:1 45RPM - 9V

The miniature motor in the N20 series with 298:1 gearing, has 45 RPM , and the torque is 2.9 kg*cm (0.284 Nm) . The supply voltage ranges from 3 V to 9 V.
Index: DNG-12593
Index: DNG-12593
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT44 250:1 90RPM - 6V

The N20 series miniature motor with 250:1 gearing, has 90 RPM, torque is equal to 3 kg*cm (0.294 Nm). The supply voltage is 6 volts.
Index: DNG-12606
Index: DNG-12606
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT35 150:1 200RPM - 9V

The N20 series miniature motor with 150:1 gearing, has 200 RPM , torque is 2.9 kg*cm (0.284 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12594
Index: DNG-12594
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT41 100:1 150RPM - 6V

The N20 series miniature motor with 100:1 gearing, has 150 RPM, torque is 0.3 kg*cm (0.029 Nm). The supply voltage is 6 volts.
Index: DNG-12603
Index: DNG-12603
Waiting time approx. 4-6 weeks
Regular price PLN16.18 Price PLN16.18

Micro motor N20-BT17 50:1 250RPM - 9V

The N20 series miniature motor with 50:1 gearing, has 250 RPM, torque is 0.5 kg*cm (0.049 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12556
Index: DNG-12556
Available, 24 hours shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18