Product description: HP motor 15:1 double-sided shaft - 6 V
A powerful, small-sized Pololen motor witha15:1 gearbox. 2000 rpmand0.3 kg*cm (0.029Nm)torque. The6-voltmotorconsumes 70mA ofcurrent when operatingwithout a load, while theshaft is at a standstill up to 1.6A. Thisversion has an extended 5mm shaft, which allows the installation of speed sensors - encoders.
Polol HP motors.
Motor dimensions 15:1
The motor body is shaped like a 26 x 10 x 12 mm cuboid. Gearbox length is 10 mm. There is a 3 mm D-shaped shaft at the output. Total weight is about 9,5 g.
The drawing shows dimensions of the Polol micro motor with gearbox.
Accessories for the motor
We offer a range of accessories that work with Polol's micro motors:
- Mountings
Special mountings in white orblackhave been designed for motor mounting. There is also anextendedversion availableandmade of aluminum withincreasedstrength.
- Wheels, crawlers,hubs, encoders
Ouroffer also includes wheels and crawlers, matched to the shafts of Polol'smicromotors. There is also a special version of wheels with speed measurement - encoders. Installation of non-standard wheels is facilitated by adapters.
- Motor controllers
Direction and speedcontrolis provided by DC motor controllers. The offer includes both self-solderingintegratedcircuits as well as ready-to-connect, cooperating with sets (e.g. Arduino) modules.
.jpg)
The film from the final runThe winnerThe robot we have made has micro motors of Polol HP with 10:1 transmission.
There are also many otherenginesin the shop's offer.
Engine specification Polol HP 15:1
| Specification | |
|---|---|
|
Supply voltage |
6 V |
|
no-load current |
70 mA |
|
Current at the stopped rampart |
1600 mA |
|
Unloaded speed |
2000 rpm |
|
Torque |
0.3 kg*cm (0.029 Nm) |
|
Translation |
15:1 |
|
Shaft diameter |
3 mm |
|
Body dimensions |
26 x 10 x 12 mm |
|
Mass |
9,5 g |
|
Double-sided shaft |
Yes |
Useful links |
