Product description: HPCB 5:1 12 V motor, double-sided shaft - Polol 3047
Polol's small, lightweight yet powerful engines are used as drive units by robot constructors. The optimum voltage at which the power to strength ratio is most favourable is 12 V. This version has an extended shaft with a length of 5.0 mm, allowing the installation ofspeed sensors - encoders.
|
This version has carbon brushes with increased strength and a shaft on both sides for mountingthe encoders. |
Motor dimensions
The motor body is a 26 x 12 x 10 mm cuboid. The gearbox is 9,27 mm long. There is a 3 mm D-shaped shaft at the output. Total weight is about 9,5 g.
The drawing shows the dimensions of the Polol micro motor with gearbox.
Accessories
We offer a range of accessories that work with Polol's micro motors:
- Mountings
Special mountings in whiteorblack have been designed for mounting motors.There is also anextendedversion available and made ofaluminumwith increased strength.
- Wheels,crawlers,hubs,encoders
Our offer also includeswheelsandcrawlers, matched to the shafts of Polol's micro motors. There is also a special version of wheels with speed measurement - encoders. Installation of non-standard wheels is facilitated byadapters.
- Motor controllers
Direction and speedcontrolis provided by DC motor controllers. The offer includes both self-solderingintegrated circuitsas well as ready-to-connect, cooperating with sets (e.g. Arduino)modules.
There are also many othermotorsin the shop's offer.
Specification
|
Power supply voltage: |
12 V |
|
Non load current (12 V): |
100 mA |
|
Current at stopped shaft (12 V): |
800 mA |
|
Speed without load (12 V): |
6000 rpm |
|
Torque (12 V): |
0.1 kg*cm (0.01 Nm) |
|
Gear ratio: |
4,995:1 |
|
Brushes: |
Carbon brushes, high strength |
|
Shaft diameter: |
3 mm |
|
Body dimensions: |
26 x 12 x 10 mm |
|
The weight: |
9,5 g |
|
Two-sided shaft: |
YES |
Useful links |
