Description
Converter allows to connect serial interface RS232 and UART -voltage standard TTL. Module on one side has a D-SUB connector, on the other outputs solderedgoldpin connectors - 2.54 mm raster. Control system is a converter SP3232 (compatible with MAX3232) with operating voltages of 3.3 V and 5 V.
Connection
Description of pins goldpin raster 2.54 mm, are given in the table below.
Pin | Description |
---|---|
VCC | Voltage ranges from 3.0 V to 5.5 V. |
GND | The ground of the system. |
RX | The input line of the UART interface. |
TX | The linear output of the UART interface. |
CTS | Pin for flow control - signals data ready to send. |
RTS | Pin for flow control - request to send data. |
Specification
- Supply voltage: from 3.0 V to 5.5 V
- Driver: SP3232 (documentation) - compatible with MAX3232
- Outputs:
- Management UART interface -connector goldpin raster 2.54 mm
- RS232 - DB9 connector
- Mounting holes with screws
- Included 6-pin cable with female ends
- Board sizes: 45 x 31 mm
Useful links |