- New
- Sale
- Sale
Metro Mini 328-5V/16MHz - compatible with Arduino - Adafruit 2590
Index: ADA-04274
- Reduced price
- Sale
ELECTRONICS - Strona 116
Loading...
Plastic case Kradex Z52U IP54 - 145x74x40mm black with props
2-part, universal case for an electronic circuit. External dimensions 145 x 74 x 40 mm .
Index: KDX-05931
Index: KDX-05931
- Sale
Universal board small 210 holes - MSX
A universal board with a connection layout in accordance with the contact plate. The module allows to transfer and solder the prototype system from the contact plate while...
Index: MSX-06120
Index: MSX-06120
DFRobot Gravity Self-Locking Switch
Digital bistable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules. Each press changes its status to opposite.
Index: DFR-06290
Index: DFR-06290
Driver for sliding gates KSE380/KSE180
Control unit for sliding gates KSE180 / KSE380 with a radio receiver with a frequency of 433.92 MHz.
Index: MOD-06508
Index: MOD-06508
Servo Trigger - Continuous Rotation - SparkFun WIG-13872
Module facilitating servo operation. On receiving an external signal, the controller moves the servo from position A to position B at a predetermined speed. The supply voltage...
Index: SPF-06555
Index: SPF-06555
Installation cable LgY 1x0.5 H05V-K - black - roll 100m
Cable with copper multiwire vain and insulation in the PVC shield. It is used, for example, in places that require repeated bending or movable parts of machinery. Gauge of the...
Index: KAB-06689
Index: KAB-06689
2,54 mm - angular plug 12-pin - 5pcs.
The 12-pin angular plug for printing, the pitch is 2.54 mm. The set includes 5 x 12-pin plugs.
Index: KAB-06785
Index: KAB-06785
Electric cube 12pin 16mm 30A/250V
The 12-pin terminal block allows to connect together wires with voltage of 250 V with current flow of up to 30 A. Raster of connections is 13 mm, maximum diameter of the cable...
Index: KAB-06897
Index: KAB-06897
DFRobot HR8833 - two-channel driver for DC 10V/1,5A motors
A miniature, two-channel DC motor controller. The device operates on the basis of PWM signal. The motor supply voltage is from 3.3 V to 10 V, maximum current is 1.5 A.
Index: DFR-06934
Index: DFR-06934
MiCS5524 CO, Alcohol and VOC Gas Sensor Breakout - MEMS - Adafruit 3199
Module with sensor MiCS5524 detecting the carbon monoxide, alcohol and volatile organic compounds. It i s powered with the voltage of 5 V. It has an analog output.
Index: ADA-07047
Index: ADA-07047
- Sale
- SPECIAL OFFERS
Socket DC 5.5 x 2.1 mm with terminal connector
DC φ5.5 x 2.1 mm slot (for power supply unit) with a detachable connector that allows you to mount the cable using screwdriver.
Index: KAB-07210
Index: KAB-07210
DFRobot - Dual channel DC motor driver - 27V/7A
A two-channel DC motor controller. The device operates on the basis of PWM signal. Supply voltage for motors ranges from 6.5 V to 27 V, the maximum current is 7 A.
Index: DFR-07421
Index: DFR-07421
DFRobot Gravity: Heart Rate Monitor Sensor For Arduino
Module for measuring heart rate of the human heart, compatible with Arduino. It works with voltage from 3.3 V to 6 V, the output is the analog or digital signal. The kit...
Index: DFR-07455
Index: DFR-07455
RTC PCF8523 I2C - real time clock - Adafruit 3295
Module with real time clock and backup battery. It is used in applications written to register data, in clock, alarms, etc. Communication interface is an I2C bus.
Index: ADA-07662
Index: ADA-07662
MAX31856 Breakout - Universal Thermocouple Amplifier - Adafruit 3263
Module with thermocouple amplifier MAX31856 communicating via the 4-pin SPI interface. Works with thermocouples of type K, J, N, R, S, T, E and B. Works with a supply voltage...
Index: ADA-07682
Index: ADA-07682
LED diode 5 mm violet 400 - 410 nm, the brightness from 45 to 68 mcd. Price for 10 pieces.
Index: LED-07926
Index: LED-07926
Capacitor electrolytic 2200uF/25V 13x21mm - 100pcs
The ectrolytic through hole capacitor of 2200 µF / 25 V. Pins' pitch: 3.5 mm. Size: Ø13 x 21 mm. Price is for 100 pieces.
Index: PAS-08148
Index: PAS-08148
10-segment LED Bar Display DC-10GWA - green
10-segment LED display 10 x green. It can be used for example as a temperature gauge or liquid level.
Index: LED-08164
Index: LED-08164
- Reduced price
- SPECIAL OFFERS
The angular plug for mounting on the cable. It has the ground.
Index: KAB-08174
Index: KAB-08174
Black straight plug type E WT-30-2 for cable mounting. Equipped with grounding.
Index: KAB-08176
Index: KAB-08176
Tinycontrol GSMKON-010 - relay board 4x16A/coil 12V for GSM/LAN controller
The module is equipped with 4 Relpol relay a coil supplied with a voltage of 12V, with optical isolation input and mounting holes. The system is designed to work with GSM and...
Index: TNC-08291
Index: TNC-08291
Wristband with flexible grounding conductor with banana and crocodile connectors. Cable length 1.5 m. The wristband comes in brown or blue.
Index: KAB-08429
Index: KAB-08429
Serial Basic - USB-UART converter CH340G - microUSB socket - SparkFun DEV-14050
The converter based on the CH340 chip allows communication between USB and UART interfaces. It allows data exchange between a computer and a microcontroller board. It operates...
Index: SPF-08802
Index: SPF-08802
BleBox TwilightSwitch - twilight LED switch 12-24V / 4A
Mini twilight switch used with LED strips. Works with voltage from 12V to 24V and electric current up to 4A. It turns the light on at dusk and off when it gets bright. No...
Index: BOX-08902
Index: BOX-08902